Settings on pump

Carry out settings by turning and pressing the control knob. Turn the control knob to the left or right to browse the menus or configure settings. A green focus indicates navigation in the menu. A yellow focus indicates a configuration of settings.

• Green focus: Navigation in menu.
• Yellow focus: Change settings.

• Turn  : Menu selection and parameter setting.
• Press  : Activation of menus or confirming settings.

Press the Back button (pos. 3.5 in section “Description of operating elements”) to change the focus back to the previous focus. Consequently, the focus moves one level further up in the structure or to a previous setting.

Pressing the Back button after having changed a setting (yellow focus) without confirming the changed value returns the focus to the previous focus. The adjusted value will be discarded. The previous value remains unchanged.
If the Back button is pressed for more than 2 seconds, the Home screen opens and the pump can be operated from the main menu.

NOTICE

If there are no warning or error messages, the display on the electronic module will switch off 2 minutes after the last time it was operated.

• If the control knob is pressed or turned again within 7 minutes, the previously exited menu will appear. You can continue to configure settings.

• If the control knob is not pressed or turned for more than 7 minutes, any unconfirmed settings will be lost. Pressing the button again opens the Home screen on the display and the pump can be operated from the main menu.