Maintenance measures
WARNING
Risk of injury from sharp edges!
Sharp edges can form on the propeller blades. There is a danger of cuts and similar injuries!
- Wear protective gloves!
Before starting maintenance work, meet the following requirements:
- Wear protective equipment! Observe the work regulations.
- Safety shoes: Protection class S1 (uvex 1 sport S1)
- Protective gloves: 4X42C (uvex C500)
- Safety goggles: uvex skyguard NT
- For detailed marking of frame and disc, see the section on “Personal protective equipment”.
- The mixer has been thoroughly cleaned and disinfected.
- Motor must have cooled down to the ambient temperature.
- Workplace:
- Clean, good lighting and ventilation.
- Firm and stable work surface.
- Secured against falling over and slipping.