Basic advice on fixing the switchgear in place

Various structures can be used for installation (concrete wall, mounting rail, etc.). For this reason, the fixation material for the relevant construction must be provided by the customer and the following information must be observed:

• To prevent cracks in the masonry and chipping of the construction material, ensure sufficient clearance to the edge of the structure.
• The depth of the borehole depends on the length of the screws. Drill the borehole approx. 5 mm deeper than the screw length.
• Drilling dust impairs retention force. Always blow the borehole clean or vacuum it out.
• Do not damage the housing during installation.