Installation
DANGER
Risk of explosion if the switchgear is installed in potentially explosive areas!
The switchgear does not have its own explosion protection class and must always be installed outside of potentially explosive areas! The connection must be made by a qualified electrician.
- Level sensor and connection cable provided by the customer.
- While laying the cables, ensure that there is no tension, no kinking and no pinching that could damage the cable.
- Check the cable cross-section and length for the routing type chosen.
- Seal unused threaded cable glands.
- Ensure that the following ambient conditions are adhered to:
- Ambient/operating temperature: -30 … +50 °C
- Relative humidity: 40 … 50 %
- Max. relative humidity: 90 %, non-condensing