Design
Pump chamber made of plastic for vertical underground (concealed-floor) installation outside buildings.
1 | Pump chamber |
2 | Discharge pipe |
3 | Non-return valve |
4 | Surface coupling |
5 | Shut-off valve |
6 | Discharge connection |
7 | Lifting equipment (chain) |
8 | Cross beam |
9 | Inlet connection |
10 | Ventilation/cable ducts |
11 | Pump |
12 | Level control device |
13 | Slinging point for lifting equipment |
14 | Hook for slinging of chain |
15 | Pump chamber cover |
Ready-to-install plastic pump chamber:
- Monolithic design without sealing surfaces
- Semi-spherical bottom to minimise deposits and maximise the structure stability
- Slinging points for easy relocation and movement
- Integrated fins to prevent buoyancy against ground water up to the ground surface without the requirement for concrete weights
Full pipework：
- Surface coupling for fast and easy pump installation
- Non-return valve
- Detachable non-return ball valve installed directly at the discharge port of the pump
- Connections on the pipework for a flush connection and a vacuum relief valve
- 3 connections for inlet and 2 connections for ventilation and cable ducts
A pump chain is included as lifting equipment for pumps.
Pump chamber cover available in classes A 15, B 125 and D 400