Design
Fully submersible and automatically operated sewage lifting unit with solids separation system and two submersible sewage pumps in alternating operation without peak load
1 | Collection tank |
2 | Inspection opening |
3 | Solids separation tank |
4 | Shut-off valves for the solids separation tank |
5 | Inlet |
6 | Supply box/distributor |
7 | Discharge port with flange connector |
8 | Shut-off valves for discharge pipe |
9 | Sewage pump |
10 | Non-return valve |
11 | Manual flushing line for the collection tank |
12 | Pump support bracket |
All-in-one gastight and watertight collection tank:
- Without constructive welded joints
- With an inspection opening
- Rounded edges and sloped floor with the deepest point directly below the pump, preventing deposits and the drying of solids at critical points
Two solids separation tanks:
- Pre-filtering sewage upstream of the collection tank
- Separately lockable
Sewage pump:
- Mounted directly on the collection tank
- Two high-performance submersible sewage pumps run in alternating operation as a redundant double-pump system
Supply box/distributor:
- For connection to the inlet pipe
- With transparent cover
Manual flushing line for the collection tank
Make sure that the customer supplies the switchgear. Make sure the necessary control of a lifting unit with solids separation system is available.