Preparing the installation

• Unpack the lifting unit.
• Remove the transportation lock.
• Examine the scope of delivery.
• Examine that all components are in correct working condition. CAUTION! Do not install defective components. Defective components can lead to system failures.
• Put accessories aside and keep them for subsequent use.
• Prepare the installation location:
• Horizontal and flat installation surface
• Free space of min. 60 cm (2 ft) around the unit
• Feasible fixation with dowels
• Clean, free of coarse solids
• Dry
• Frost free
• Sufficiently lit
• For concealed-wall installation, follow these points:
• Inspection opening
• Minimum distance between wall and the unit: 20 mm
• Sufficient and regular air change for motor cooling CAUTION! Not sufficient air change can lead to overheating of the motor and a possible decrease of function of the lifting unit.
• Ventilation of the lifting unit over the roof
• Sufficient space for maintenance and repair: safe and easy access to tank opening, non-return valve, motor, and switchgear
• For concealed-floor installation, follow these points:
• Sufficient space for maintenance and repair: safe and easy access to tank opening, non-return valve and motor
• Ventilation of the lifting unit over the surface
• Outdoor switch cabinet for installation of the switchgear