Operation

The lifting unit operates in automatic mode by default and is switched on and off through the integrated level control device.

WARNING

warning

Risk of burns from hot surfaces!

During operation, the motor housing can get hot. There is a risk of skin burns if component is touched.

  1. Cool down the motor to ambient temperature after switching off.
  1. Commissioning is done.
  2. Test run is done.
  3. The handling and functioning of the lifting unit are known.
  4. Discharge pipe is fully filled with water.
  1. Activate the lifting unit: Put the plug into the socket.
  2. Set automatic mode on the switchgear.
  3. Open the shut-off valve in the inlet and discharge pipe.
  1. The lifting unit operates in automatic mode and is controlled depending on level.