Cleaning the pump

  1. Pack the plug or bare cable ends watertight.
  2. Flush the pump and the connection cable with clean, running water.
  3. To clean the impeller and the inner part of the pump, direct the water jet into the discharge port.
  4. Also flush the attachments (e.g., discharge pipe, pressure hose) with clean, running water.
  5. Flush the dirt left on the floor into the sewer.
  6. Dry out the pump.
  7. Clean the plug or bare cable ends with a moist cloth!
  1. Pump cleaned. Pack the pump and keep it.