Removal
DANGER
Danger through bacterial infection!
There can be bacteria and hazardous germs in stagnant water. Follow these points:
- Keep the area properly ventilated.
- Wear a respiratory mask, e.g., Half mask 3M series 6000 with filter 6055 A2.
- Disinfect the pump.
- Wear protective equipment.
- The motor housing can get hotter than 40 °C (104 °F).
- Always carry the product by the handle.
- Cool down the product.
- Empty the pit.
- Close all gate valves.
- Switch off the pump.
- Disconnect the pump from the mains.
- Disassemble the pump from the discharge line.
- Remove the pump from the site.
- Unscrew the discharge pipe/pressure hose from the discharge port.
- Coil up the connection cable and keep it at the pump.
- Pump removed. Clean the pump and the discharge pipe/pressure hose thoroughly.