Removal

DANGER

danger

Risk of fatal injury due to electrical current!

Improper conduct when carrying out electrical work can lead to death due to electric shock!

  1. Before all electrical work, disconnect the product from the mains and secure it against being switched on again without authorisation.
  2. Disconnect the battery and insulate the plus contact.
  3. Electrical work must be carried out by a qualified electrician!
  4. Observe local regulations!
  1. Disconnect the switchgear from the mains supply − remove the mains plug.
  2. Remove the cover.
  3. Remove the blade connector from the plus contact (+) of the battery.
  4. Connect the grommet to the plus contact (+) of the battery.
  5. Disconnect all connection cables and pull them out of the threaded cable glands.
  6. Seal the threaded cable glands.
  7. Loosen the fastening screws and remove the switchgear.
  8. Put the cover back on and secure it.
  1. Switchgear removed.