Alarm output connection (not potential-free, only DrainAlarm)

CAUTION

Property damage due to external voltage!

An external voltage which is applied destroys the component.

  1. Do not apply external voltage (connect potential-free).

A DC voltage is applied to the alarm output when an alarm is triggered. This can be used to operate other alarm signals (horn, flashlight, etc.).

  • Terminals: 1 (+) and 2 (-)
  • Max. load: 12 V=, 350 mA
  • The battery provides the power supply for the alarm output. The maximum operating time of the alarm output is approx. 60 minutes, depending on the connected load. The power supply unit provides the power supply for the alarm output if the battery is drained. The battery meanwhile is charging at the same time.

Insert the connection cable laid on-site through the threaded cable glands and secure. Connect the wires to the terminal strip according to the connection diagram.

Connection terminals
Connection terminals