Start automatic mode

Automatic mode after initial configuration

  1. The switchgear is closed.
  2. Configuration complete.
  3. Direction of rotation correct.
  4. Motor current monitoring set correctly.
  1. Start Easy Actions menu: Turn control knob 180°.
  2. Select the pump for automatic mode: Turn the control knob until the menu item is displayed:
    – Pump 1: P1 Auto
    – Pump 2: P2 Auto
  3. Press the control knob.
  4. Automatic mode is set for the selected pump. Alternatively, setting can be performed in menu 3.02 to 3.03.
  1. Automatic mode switched on.

Automatic mode after shutdown

  1. The switchgear is closed.
  2. Checked configuration.
  3. Parameter input enabled: Menu 7.01 shows on.
  1. Press the control knob for 3 s.
  2. Menu 1.00 appears.
  3. Turn the control knob until menu 3.00 appears
  4. Press the control knob.
  5. Menu 3.01 appears.
  6. Press the control knob.
  7. Change value to “on”.
  8. Press the control knob.
  9. Value saved, pump enabled.
  1. Automatic mode switched on.