Setting control mode “Δp-c” using the underfloor heating type of heating system as an application example
Starting situation
- Pump starts in factory settings DA+.
The following operating steps can be set via the menu using the control knob:
→ | Settings (turn control knob right + press) |
→ | Set control mode (press control knob) |
→ | Setting assistant (press control knob) |
→ | Heating (press control knob) |
→ | Underfloor heating (turn control knob right + press) |
→ | Differential pressure Δp-c (press control knob) |
The setting returns to “Setting assistant”. To set a setpoint, press and hold the back button (left). The setting returns to the start screen.
→ | Setpoint of the delivery head (press control knob) | |
|
NOTICE
The set system type and the set control mode are shown at the top of the display.
The actual duty point and the measured values are shown on the right-hand side of the display.