Step 3 – Selection of secondary pumps

In order to select the secondary pumps connected to the Wilo Net, select “Selection of secondary pumps” in the menu. The connected secondary pumps are listed there and can be selected.

Setting assistant – Selection of secondary pumps

Select secondary pumps that have to be supplied downstream of a hydraulic shunt or heat exchanger and connect them to Wilo Net.

Select “Selection of secondary pumps” by turning the control knob and pressing to confirm.
Each partner pump has to be selected as secondary pump from the pumps detected by Wilo Net.

Select the partner pump by turning the control knob and press to confirm.
When pressed, the white tick appears on the selected pump.
The secondary pump indicates for its part on the display that it has been selected.

All other secondary pumps are selected in the same way. Then press the Back button to go back to the “Set control mode” menu.

To visualise the Multi-Flow Adaptation Overview, “Operating data, statistics” can be selected in the main menu “Diagnostics and measured values”. Then select “Multi-Flow Adaptation Overview”.