Initial settings menu

The settings menu will appear in the display during initial commissioning of the pump.

If necessary, press the Context button and go to the Language menu to change the language.

The pump runs in factory setting when the initial commissioning menu is open. For detailed information on the factory setting, see “Factory setting” section

• You can exit the initial settings menu by activating “Start with factory settings” menu by pressing the control knob. The display changes to the main menu. The pump continues to run in the factory setting.
• Stratos MAXO/Stratos MAXO-D: The pump runs in the factory setting ➜ Application: Radiator; Control mode: Dynamic Adapt plus.
• Stratos MAXO-Z: The pump runs in the factory setting ➜ Application: Domestic hot water circulation; control mode: Temperature T_const.
• If venting has been started, other settings can be made in the meantime. (For information on pump venting, see “Pump venting” section).
• You can select and set language, units, applications and night setback, among other things, in the “First settings” menu.
  The chosen initial settings are confirmed by activating “Finish initial settings”. The display changes to the main menu.