Maintenance measures
DANGER
Danger due to fluids hazardous to health when carrying out maintenance tasks!
The mixer is not dismantled to carry out these tasks. Personnel may come into contact with fluids that are hazardous to health. Observe the following points:
- Wear protective equipment:
- sealed safety glasses
- mouth protection
- safety gloves
- Wipe up drips immediately.
- Clean and disinfect tools after use.
- Observe the specifications of the factory regulations!
- Wear protective equipment! Observe the work regulations.
- Protective gloves: 4X42C (uvex C500 wet)
- Safety shoes: Protection class S1 (uvex 1 sport S1)
- Safety goggles: uvex skyguard NT
- Prepare the installation site:
- Clean, free of coarse solids
- Dry
- Frost-free
- Disinfected
- Demarcate the working area.
- Keep unauthorised persons away from the working area.
- Toxic or asphyxiating gases may build up during work:
- Observe protective measures in accordance with work regulations (gas measurement, carry a gas detector with you).
- Ensure adequate ventilation.
- If toxic or asphyxiating gases accumulate, leave the workplace immediately!
Performing maintenance measures
- Mixer is decommissioned.
- Drive unit has cooled to ambient temperature.
- Drive unit has been thoroughly cleaned and disinfected (if required).
- Carry out maintenance measures as prescribed.
- If deficiencies are identified, replace the components. See “Repairs”.
- Perform maintenance measures in accordance with the manufacturer instructions.
- Maintenance carried out. Recommission the mixer.