Clean and disinfect
- Wear protective equipment! Observe the work regulations.
- Safety shoes: Protection class S1 (uvex 1 sport S1)
- Breathing protection: Half mask 3M series 6000 with filter 6055 A2
- Protective gloves: 4X42C + Type A (uvex protector chemical NK2725B)
- Safety goggles: uvex skyguard NT
- Use of disinfectants:
- Use strictly according to the manufacturer’s instructions!
- Wear protective equipment according to the manufacturer’s instructions!
- Dispose of rinsing water in accordance with the local regulations, e.g. feed it into the sewer!
- Mixer removed.
- Drive unit packaged in watertight manner.
- Attach the lifting accessory to the drive unit’s slinging points.
- Lift the mixer approximately 30 cm (10 in) above the ground.
- Spray the mixer with clear water from top to bottom.
- Spray the propeller blades and cover cap from all sides.
- Disinfect the mixer.
- Dispose of dirt residue on the ground, e.g. flush it into the sewer.
- Leave the mixer and other components to dry.