Decommissioning
NOTICE
Observe motor instructions!
For more information, read and comply with the separate motor instructions.
The mixer is deactivated during decommissioning, but remains installed. This ensures that the mixer is always ready for operation.
- To protect the propeller from frost and ice, always immerse the propeller completely in the fluid. Min. coverage in water: 1 m (3 ft).
- The temperature of the fluid must always be above +3 °C (+37 °F).
- Switch off the mixer at the operating point.
- Secure the operating point against being switched on again by unauthorised persons (e.g. lock main switch).
- The mixer is decommissioned and can now be dismantled.
If the mixer remains installed after decommissioning, observe the following:
- Ensure that the requirements for decommissioning are maintained for the complete decommissioning period. If these requirements cannot be guaranteed, package or dismantle the mixer after decommissioning!
- Carry out a 5-minute functional test at regular (monthly to quarterly) intervals.