Before activating
NOTICE
Observe motor instructions!
For more information, read and comply with the separate motor instructions.
Check the following prior to activation:
- Check whether the device has been installed properly and in accordance with the locally applicable regulations:
- Has the mixer been installed correctly and safely?
- Has the mixer been earthed?
- Has electrical connection been made in accordance with regulations?
- Has the connection cable been laid in accordance with regulations?
- Are mechanical components attached correctly?
- Have minimum clearances between the propeller and fixtures in the operating space been observed?
- Check the drive unit:
- Gear: Has preservation oil been removed and the gear filled with operating oil and cleaned?
- Has specified oil filling (type, quantity, installation position) been ensured?
- Are oil level and oil drainage screws freely accessible?
- Has the impermeability of all screwed connections on the gear been checked?
- Has the user read and implemented the manufacturer’s instructions?
- Check the operating conditions:
- Have the directions of rotation and thrust been tested in accordance with system specification?
- Intermittent operation – has upstream soft starter been installed?
- Have the min./max. temperatures of the fluid been tested?
- Has the max. immersion depth been tested?
- Has the minimum water coverage of the propeller been defined and is this monitored?