Pump removal

DANGER

danger

Danger due to fluids which are hazardous to health!

Danger of bacterial infection!

  1. Disinfect the pump after removal!
  2. Observe the specifications of the work regulations!

DANGER

danger

Risk of fatal injury due to electrical current!

Improper conduct when carrying out electrical work can lead to death due to electric shock!

  1. Electrical work must be carried out by a qualified electrician!
  2. Observe local regulations!

DANGER

danger

Risk of fatal injury due to dangerous lone working practices!

Work in chambers and narrow rooms as well as work involving risk of falling are dangerous work. Such work may not be carried out autonomously!

  1. Only carry out work with another person!

Wear the following protective equipment while performing the work:

If contact with hazardous fluid occurs during work, wear the following additional protective equipment:

The protective equipment specified is the minimum requirement. Observe the specifications of the work regulations!
* Protection level according to EN 170 not relevant for this work.

The pump can be removed from the pump chamber for maintenance work on the pump.

  1. Pumping station decommissioned.
  2. Pumping station incl. all components disinfected.
  3. Protective equipment used.
  4. Working area cordoned off.
  1. Remove the chamber cover.
  2. Attach the hoisting chain to the lifting accessory.
  3. Uncouple the pump with discharge line at the surface coupling.
  4. Remove the pump.
  5. NOTICE! Attach a drawing wire to the connection cable of the pump. Pull the drawing wire into the chamber when removing the pump.
  6. Fit the chamber cover.
  1. Pump removed.