Operation

The pumping station operates in automatic mode by default and is switched on and off using the integrated level control device.

  1. Commissioning has been carried out.
  2. Test run has been completed successfully.
  3. The operation and functioning of the pumping station are known.
  4. Pressure pipe completely filled with water.
  1. Activate the pumping station:
  2. Unit without switchgear: Insert plug into socket.
  3. Unit with switchgear: Activate switchgear at the main switch. Select automatic mode.
  4. Open the gate valve in the inlet and pressure pipe.
  1. The pumping station operates in automatic mode and the pump is controlled depending on the level.