Connect the cable pipe

The electrical connection cables are routed to the outside via a separate cable pipe. Observe the following points when connecting the cable pipe:

  • Before connecting the cable pipe, pull in the threading strip.
  • All connections must be completely tight.
Labelling on the pump chamber
Labelling on the pump chamber

6

Cable pipe connection

  1. Pump chamber is installed properly.
  2. On-site cable pipe is laid properly.
  3. Retractable tape available in the on-site cable pipe.
  4. HT sleeve socket available
  1. Open the connection piece for the cable pipe: Sawing edge approx. 25 mm.
  2. Deburr and smooth the sawing edge.
  3. Put the HT sleeve socket on the connection port.
  4. Pull the retractable tape into the pump chamber.
  5. Insert the on-site cable pipe into the HT sleeve socket.
  1. Cable pipe installed.
  2. Next step: Install the pump chamber extension (if necessary).
Cable pipe connection
Cable pipe connection