Install the pump chamber

1

Mounting bracket (2 pieces)

2

Fixation for mounting bracket:

  • 4x M5x25 hexagon head screw
  • 4x M5 hexagon nut
  • 8x washers

3

Floor fixation:

  • 2x SXRL 10x80FUS long-shaft dowel
  • 2x 7 mm hexagon head screw
Install the pump chamber
Install the pump chamber

Install pump chamber so as to protect against buoyancy and twisting. Anchor the lifting unit to the floor for this.

  1. Preparatory tasks have been completed.
  2. Installation location prepared according to consulting documents.
  3. Enclosed fixation material: Observe the information on the building ground! If necessary, provide suitable fixation material for the floor fixation on-site.
  4. SW8 and SW13 wrench
  1. Place the pump chamber at the installation site and align it with the on-site pipework.
    NOTICE! The pump chamber must be vertical!
  2. Mount the mounting brackets on the chamber ribs (Item 2).
  3. Mark the boreholes.
  4. Place the pump chamber to one side.
  5. Drill and clean the boreholes.
  6. Insert wall plugs (Item 3)
  7. Align the pump chamber with the boreholes.
  8. Attach the pump chamber to the floor (Item 3).
  1. Pump chamber installed so as to protect against buoyancy and twisting.
  2. Next step: Connect the pressure pipe.