Pump removal
DANGER
Danger due to fluids which are hazardous to health!
Danger of bacterial infection!
- Disinfect the pump after removal!
- Observe the specifications of the work regulations!
DANGER
Risk of fatal injury due to electrical current!
Improper conduct when carrying out electrical work can lead to death due to electric shock!
- Electrical work must be carried out by a qualified electrician!
- Observe local regulations!
DANGER
Risk of fatal injury due to dangerous lone working practices!
Work in chambers and narrow rooms as well as work involving risk of falling are dangerous work. Such work may not be carried out autonomously!
- Only carry out work with another person!
Wear the following protective equipment while performing the work:
- Safety shoes: Protection class S1 (uvex 1 sport S1)
- Protective gloves: 4X42C (uvex C500 wet)
- Safety helmet: EN 397 Conforms to standards, protection against lateral deformation (uvex pheos)
- (When using lifting equipment)
If contact with hazardous fluid occurs during work, wear the following additional protective equipment:
- Safety goggles: uvex skyguard NT
- Labelling frame: W 166 34 F CE
- Labelling disc: 0-0.0* W1 FKN CE
- Breathing protection: Half mask 3M series 6000 with filter 6055 A2
The protective equipment specified is the minimum requirement. Observe the specifications of the work regulations!
* Protection level according to EN 170 not relevant for this work.
The pump can be removed from the pump chamber for maintenance work on the pump.
- Pumping station decommissioned.
- Pumping station incl. all components disinfected.
- Protective equipment used.
- Working area cordoned off.
- Remove the chamber cover.
- Loosen the union nut on the shut-off ball valve.
- Release the discharge line from the shut-off ball valve.
- Remove the pump.
- Fit the chamber cover.
- Pump removed.