Clean and disinfect
- Wear protective equipment! Observe the work regulations.
- Safety shoes: Protection class S1 (uvex 1 sport S1)
- Breathing protection: Half mask 3M series 6000 with filter 6055 A2
- Protective gloves: 4X42C + Type A (uvex protector chemical NK2725B)
- Safety goggles: uvex skyguard NT
- Use of disinfectants:
- Use strictly according to the manufacturer’s instructions!
- Wear protective equipment according to the manufacturer’s instructions!
- Dispose of rinsing water in accordance with the local regulations, e.g. feed it into the sewer!
- Pumping station decommissioned.
- Remove the chamber cover.
- Activate the unit:
- Unit without switchgear: Insert plug into socket.
- Unit with switchgear: Activate switchgear at the main switch.
- Open the gate valve in the pressure pipe.
- Spray the pump chamber from the inside via the chamber opening using clean water from top to bottom.
- Disinfect the pumping station.
- Drain the pump chamber.
- Unit with switchgear: Activate the pump in manual mode and drain the pump chamber.
- Repeat steps 4 to 6 until the pump chamber, pump and level control device are cleaned.
- Close the gate valve in the pressure pipe.
- Pump out the remaining pumped fluid via emergency draining.
- Decommission the pumping station.
- Allow the pumping station to dry out.
- Fit the chamber cover.
- Pumping station disinfected. The individual components can now be removed.