DrainLift WS 40E/WS 40D Basic

1

Pump chamber discharge outlet

2

Discharge line, on-site

3

Union nut and clamp ring

WS 40 ... Basic: Connecting the pressure pipe
WS 40 ... Basic: Connecting the pressure pipe
  1. Pump chamber installed properly.
  2. Pressure pipe installed correctly to the discharge port according to consulting documents.
  3. Installation material DrainLift WS 40D: Y-piece, to be provided on-site
  1. Loosen the union nut, remove the clamp ring.
  2. Push the union nut and clamp ring onto the discharge line provided on-site.
  3. Plug the discharge line provided on-site into the discharge outlet.
  4. Place the clamp ring and tighten the union nut.
  1. Pressure pipe connected.
  2. Next step: Connect the inlet.