Work steps

The pump chamber is installed in the following steps:

• Preparatory tasks.
• Dig a pit and install pump chamber.
• Connect the pressure pipe. See building installation “Connecting the pressure pipe”
• Connect the inlet. See building installation “Connect the inlet”
• Connect the vent. See building installation “Connecting the vent”
• Connect the cable pipe.
• Fit the pump chamber extension.
• Check the pump is properly fitted. See building installation “Check the pump is properly fitted.”
• Install the level control device. See building installation “Install the level control device”
• Lay the connection cable.
• Backfill the pit.
• Fit the chamber cover. See building installation “Fit the chamber cover”