Using a lowering device

  1. Mixer decommissioned.
  2. Protective equipment put on according to work regulations.
  1. Disconnect mixer from the mains.
  2. Disconnect and wind up the connection cable.
  3. Insert lifting equipment in hoisting gear.
  4. Slowly lift mixer and remove it from the basin. During the lifting procedure, detach the connection cable from the lifting equipment and wind it up.
    DANGER! Mixer and connection cable come directly out of the fluid. Wear protective equipment according to work regulations!
  5. Swivel mixer and set it down on a firm surface.
  1. Removal is complete. Clean mixer and set-down location thoroughly, disinfect if required and store away.