Ground installation

In the case of ground installation, the mixer is fixed directly to the floor of the basin using a mounting bracket. CAUTION! If the mixer is ordered for ground installation, the mounting bracket comes pre-assembled. If the mixer is delivered without a mounting bracket, order the appropriate mounting bracket from customer service! Lay the connection cable along the basin floor and upwards up the basin wall.

  1. Operating space/installation location is prepared for the installation. Defined clearances to fixtures and basin walls are kept in accordance with the consulting documents.
  2. Mixer is not connected to the mains.
  3. Mounting bracket mounted on the mixer.
  1. Have 2 persons position the mixer on the basin floor and mark 2 fixation holes.
  2. Set the mixer down outside of the working area.
  3. Drill fixation holes and insert anchor bolts. NOTICE! Follow the manufacturer’s installation instructions!
  4. Once the anchor bolts have hardened in place, have 2 persons position the mixer on the anchor bolts and fix in place with fixation material.
  5. Mount the mixer firmly against the basin floor. NOTICE! Follow the manufacturer’s installation instructions!
  6. Lay the connection cable against the basin floor and the basin wall so that it is slightly taut. CAUTION! If the connection cable leads over the edge of the basin, beware of potential abrasion. Sharp edges may damage the connection cable. Bevel the basin edge if necessary!
  7. Apply corrosion protection (e.g. Sikaflex):
    - Sealing joint between mounting bracket and structure.
    - Fill holes in the baseplate of the mounting bracket.
    - Fill scratches in the mounting bracket.
  1. Mixer is installed. Make the electrical connection.
Ground installation
Ground installation