Oil change

Sealing chamber oil change

1

Sealing chamber screw plug

  1. Wear protective gloves!
  2. Pump is removed, cleaned and if necessary disinfected.
  3. Oil-resistant sealable collector tank is accessible.
  1. Position the pump horizontally on a firm surface. The screw plug should face upwards.
  2. Secure the pump against falling over or slipping!
  3. Unscrew the screw plug slowly.
  4. Place a collector tank underneath the pump.
  5. Draining the oil: rotate the pump until the opening points downwards.
  6. Checking the oil: notify customer service if the oil contains metal swarf!
  7. Rotate the pump until the opening points upwards again.
  8. Filling the oil: pour the oil in through the opening.
  9. Comply with requirements concerning oil type and quantity!
  10. Clean the screw plug, replace the seal ring with a new one and fully screw it in.