Clean pump

  1. Pump removed.
  2. Disinfectant is available.
  1. Ensure that the plug or bare cable end is packed and stored in a watertight manner!
  2. Rinse the pump and cable under clean, running water.
  3. Guide the water jet inwards through the pressure port to clean the impeller and pump interior.
  4. Rinse attachments such as the discharge pipe and pressure hose with clean, running water.
  5. Flush dirt residue on the floor into the sewage drain.
  6. Allow the pump to dry out.
  7. Clean plug or bare cable end with a damp cloth!
  1. Pump has been cleaned. Pack and store the pump.

NOTICE! If the suction port is very contaminated, remove the cover plate for thorough cleaning!