Pioneering for You

../img/CIF_outline.png

../img/STRATOS_IF_outline.png

../img/TL_IF_outline.png

en Installation and operation instructions with functional description

de Einbau- und Betriebsanleitung mit Funktionsbeschreibung

1 GeneralAllgemeines

1.1 About this documentÜber dieses Dokument

The language of the original operating instructions is German. All other languages of these instructions are translations of the original operating instructions.Die Sprache der Originalbetriebsanleitung ist Deutsch. Alle weiteren Sprachen dieser Anleitung sind eine Übersetzung der Originalbetriebsanleitung.

These installation and operating instructions are an integral part of the product. They must be kept readily available at the place where the product is installed. Strict adherence to these instructions is a precondition for the proper use and correct operation of the product.Die Einbau- und Betriebsanleitung ist Bestandteil des Produktes. Sie ist jederzeit in Produktnähe bereitzustellen. Das genaue Beachten dieser Anweisung ist Voraussetzung für den bestimmungsgemäßen Gebrauch und die richtige Bedienung des Produktes.

These installation and operating instructions correspond to the relevant version of the product and the underlying safety standards valid at the time of going to print.Die Einbau- und Betriebsanleitung entspricht der Ausführung des Gerätes und dem Stand der zugrunde gelegten sicherheitstechnischen Normen bei Drucklegung.

2 SafetySicherheit

These operating instructions contain basic information which must be adhered to during installation and operation. For this reason, these operating instructions must, without fail, be read by the service technician and the responsible operator before installation and commissioning.Diese Betriebsanleitung enthält grundlegende Hinweise, die bei Aufstellung und Betrieb zu beachten sind. Daher ist diese Betriebsanleitung unbedingt vor Montage und Inbetriebnahme vom Monteur sowie dem zuständigen Betreiber zu lesen.

It is not only the general safety instructions listed under the main point “safety” that must be adhered to but also the special safety instructions with danger symbols included under the following main points.Es sind nicht nur die unter diesem Hauptpunkt Sicherheit aufgeführten allgemeinen Sicherheitshinweise zu beachten, sondern auch die unter den folgenden Hauptpunkten mit Gefahrensymbolen eingefügten, speziellen Sicherheitshinweise.

2.1 Indication of instructions in the operating instructionsKennzeichnung von Hinweisen in der Betriebsanleitung

Symbols:Symbole:

General danger symbolAllgemeines Gefahrensymbol

Danger due to electrical voltageGefahr durch elektrische Spannung

NoteHinweis

Signal words:Signalwörter:

DANGER!GEFAHR!
Acutely dangerous situation. Non-observance results in death or the most serious of injuries.Akut gefährliche Situation. Nichtbeachtung führt zu Tod oder schwersten Verletzungen.

WARNING!WARNUNG!
The user can suffer (serious) injuries. ‘Warning’ implies that (serious) injury to persons is probable if this information is disregarded.Der Benutzer kann (schwere) Verletzungen erleiden. ‘Warnung’ beinhaltet, dass (schwere) Personenschäden wahrscheinlich sind, wenn der Hinweis missachtet wird.

CAUTION!VORSICHT!
There is a risk of damage to the product/unit. ‘Caution’ implies that damage to the product is likely if this information is disregarded.Es besteht die Gefahr, die Pumpe/Anlage zu beschädigen. ‘Vorsicht’ bezieht sich auf mögliche Produktschäden durch Missachten des Hinweises.

NOTE: Useful information on handling the product. It draws attention to possible problems.HINWEIS: Ein nützlicher Hinweis zur Handhabung des Produktes. Er macht auch auf mögliche Schwierigkeiten aufmerksam.

2.2 Personnel qualificationsPersonalqualifikation

The installation, maintenance and repair personnel must have the necessary qualifications for this work.Das Personal für die Montage muss die entsprechende Qualifikation für diese Arbeiten aufweisen.

2.3 Danger in the event of non-observance of the safety instructionsGefahren bei Nichtbeachtung der Sicherheitshinweise

Non-observance of the safety instructions can result in risk of injury to persons and damage to product/unit. Non-observance of the safety instructions will result in the loss of any claims to damages.Die Nichtbeachtung der Sicherheitshinweise kann eine Gefährdung für Personen und das Produkt/die Anlage zur Folge haben. Die Nichtbeachtung der Sicherheitshinweise führt zum Verlust jeglicher Schadenersatzansprüche.

In detail, non-observance can, for example, result in the following risks:Im Einzelnen kann Nichtbeachtung beispielsweise folgende Gefährdungen nach sich ziehen:

2.4 Safety instructions for the operatorSicherheitshinweise für den Betreiber

The existing directives for accident prevention must be adhered to. Danger from electrical current must be eliminated. Local directives or general directives [e.g. IEC, VDE etc.] and those of local power supply companies must be adhered to.Die bestehenden Vorschriften zur Unfallverhütung sind zu beachten. Gefährdungen durch elektrische Energie sind auszuschließen. Weisungen lokaler oder genereller Vorschriften [z. B. IEC, VDE usw.] und der örtlichen Energieversorgungsunternehmen sind zu beachten.

This device may be used by children with an age of 8 years or above as well as by persons with reduced corporal, sensorial or mental capacity or lack of experience and/or lack of knowledge, if they are supervised or instructed regarding the safe operation of the device and understand the resulting dangers. Children shall not play with the device. Cleaning or user maintenance shall not be performed by children without supervision.Dieses Gerät kann von Kindern ab 8 Jahren und darüber sowie von Personen mit verringerten physischen, sensorischen oder mentalen Fähigkeiten oder Mangel an Erfahrung und Wissen genutzt werden,wenn sie beaufsichtigt oder bezüglich des sicheren Gebrauchs des Geräts unterwiesen wurden und sie die daraus resultierenden Gefahren verstehen. Kinder dürfen nicht mit dem Gerät spielen. Reinigung und Benutzerwartung dürfen nicht von Kindern ohne Beaufsichtigung durchgeführt werden.

2.5 Safety instructions for inspection and installation workSicherheitshinweise für Inspektions- und Montagearbeiten

The operator must ensure that all inspection and installation work is carried out by authorized and qualified personnel, who are sufficiently informed from their own detailed study of the operating instructions.Der Betreiber hat dafür zu sorgen, dass alle Inspektions- und Montagearbeiten von autorisiertem und qualifiziertem Fachpersonal ausgeführt werden, das sich durch eingehendes Studium der Betriebsanleitung ausreichend informiert hat.

Work on the product/unit should only be carried out when it has been brought to a standstill. It is mandatory that the procedure described in the installation and operating instructions for shutting down the product/unit be complied with.Die Arbeiten an dem Produkt/an der Anlage dürfen nur im Stillstand durchgeführt werden. Die in der Einbau- und Betriebsanleitung beschriebene Vorgehensweise zum Stillsetzen des Produktes/der Anlage muss unbedingt eingehalten werden.

2.6 Unauthorized modification and manufacture of spare partsEigenmächtiger Umbau und Ersatzteilherstellung

Modifications to the product are only permissible after consultation with the manufacturer. Original spare parts and accessories authorized by the manufacturer ensure safety. The use of other parts can nullify the liability from the results of their usage.Veränderungen des Produktes sind nur nach Absprache mit dem Hersteller zulässig. Originalersatzteile und vom Hersteller autorisiertes Zubehör dienen der Sicherheit. Die Verwendung anderer Teile kann die Haftung für die daraus entstehenden Folgen aufheben.

2.7 Improper useUnzulässige Betriebsweisen

The operating reliability of the supplied product is only guaranteed if the product/unit is used as intended in accordance with Section 4 of the operating instructions. The limit values must on no account fall under or exceed those specified in the catalogue/data sheet.Die Betriebssicherheit des gelieferten Produktes ist nur bei bestimmungsgemäßer Verwendung entsprechend Abschnitt 4 der Betriebsanleitung gewährleistet. Die im Katalog/Datenblatt angegebenen Grenzwerte dürfen auf keinen Fall unter- bzw. überschritten werden.

3 Transport and interim storageTransport und Zwischenlagerung

3.1 Scope of deliveryLieferumfang

3.1 Inspection after transportTransportinspektion

Immediately check for any transit damage and/or completeness on arrival. Complain immediately if necessary.Nach Lieferung unverzüglich auf Schäden und Vollständigkeit prüfen. Gegebenenfalls sofort reklamieren.

CAUTION! Danger of damage to the CIF-Module! Danger of damage due to incorrect handling during transportation and storage. VORSICHT! Beschädigungsgefahr für das CIF-Modul! Gefahr der Beschädigung durch unsachgemäße Handhabung bei Transport und Lagerung.

The unit must be protected from moisture, frost and mechanical damage during transport and interim storage.Das Gerät ist bei Transport und Zwischenlagerung gegen Feuchtigkeit, Frost und mechanische Beschädigung zu schützen.

4 Intended UseBestimmungsgemäße Verwendung

The CIF-Modules are designed for external control and operating status signalling of Wilo pumps. The CIF-Modules are not designed for safe deactivation of the pump.Die CIF-Module sind geeignet zur externen Steuerung und Meldung von Betriebszuständen von Wilo-Pumpen. Die CIF-Module sind nicht geeignet zur sicherheitsgerichteten Abschaltung der Pumpe.

DANGER! Risk of injury and material damage!GEFAHR! Gefahr von Personen- und Sachschäden!

Never use the control inputs for safety functions.Niemals die Steuereingänge für Sicherheitsfunktionen verwenden.

Never mount the CIF-Module in a non-compatible device.Niemals das CIF-Modul in nicht kompatible Geräte einbauen.

4.1 Compatibility of firmwareKompatibilität der Firmware

This document is valid for a firmware version of up to 5.00 of the CIF-module.Dieses Dokument ist gültig für eine Firmware-Version bis 5.00 des CIF-Moduls.

To ensure the functionality of the module the following (or higher) firmware versions for the product where the CIF-module is mounted are necessary:Um die Funktion des CIF-Moduls zu gewährleisten, sind die folgenden Firmware-Versionen (oder höher) des Produkts notwendig, in welches das Modul eingebaut wird:

Note:Hinweis:

Firmware version (SW) is on a sticker close to mains terminal.Die Firmwareversion (SW) findet sich auf einem Aufkleber unter dem Klemmenkastendeckel.

Firmware version (SW) can be read out at <4.4.2.0>.Die Firmwareversion (SW) ist über das Menü <4.4.2.0> abrufbar.

Firmware version (SW) can be read out at Monitoring / Device Information / Software Version.Die Firmwareversion (SW) ist über das Menü Monitoring / Geräteinformationen / Software Version abrufbar.

Firmware can be updated with the app "Wilo-Assistant".Die Firmware kann mit der App "Wilo-Assistent" aktualisiert werden.

PumpPumpe Pump SW VersionSoftware Version Pumpe RemarkBemerkung
WILO Stratos Maxo 01002500 CIF Modbus RTU, BACnet MS/TP, LON, PLR
WILO Stratos Maxo 0103201 CIF CANopen
WILO Stratos Maxo 01042500 CIF Ethernet Multiprotocol (Modbus TCP, BACnet/IP)
WILO Stratos Maxo 01002500 CIF module version 1.00 CIF module version 4.00
WILO Stratos Maxo 01032101 CIF module version 3.00 CIF module version 1.00 CIF module version 4.00
WILO Stratos Maxo 01040000 CIF module version 3.02 CIF module version 1.00 CIF module version 4.00
WILO Stratos Maxo 01042500 CIF module BACnet MS/TP version 3.02 / CIF module Ethernet Multiprotocol (BACnet/IP) version 3.03 CIF module Modbus RTU version 3.02 / CIF module Ethernet Multiprotocol (Modbus TCP) version 3.03 CIF module version 1.00 CIF module version 4.00
WILO Stratos GIGA 2.0 01000300 CIF module BACnet MS/TP version 5.00 / CIF module Ethernet Multiprotocol (BACnet/IP) version 5.00 CIF module Modbus RTU version 5.00 / CIF module Ethernet Multiprotocol (Modbus TCP) version 5.00 CIF module version 2.00 CIF module version 4.00
WILO Stratos 1.005.005.09  
WILO TOP-E 1.004.00not compatiblenicht kompatibel  
WILO Stratos GIGA 1.00  
WILO Stratos GIGA B 1.00  
WILO BL-E 1.00  
WILO IP-E/DP-E 2.003.00 LC Display
WILO IL-E/DL-E 1.294.00 LC Matrix Display
WILO IL-E/DL-E 3.02not compatiblenicht kompatibel LC Segment Display
WILO Helix EXCEL 1.00  
WILO MVIE/MVISE/MHIE/HELIX VE (0.55…4 kW) 2.003.00 LC Display
WILO MVIE/MVISE/MHIE/HELIX VE (5.5…7.5 kW) 1.294.00 LC Display
WILO MVIE/MVISE/MHIE/HELIX VE (11…22 kW) 1.001.00 LC Display
Fig. 4.1.1: product typesAbb. 4.1.1: Typen

Für die Kompatibilität mit nicht oben aufgelisteten Produkten siehe www.wilo.de/automation

For compatibility with products not listed above, refer to www.wilo.com/automation

Pumps IL-E…BF cannot be used together with IF-Modules.Pumpen der Typenreihe IL-E…BF können nicht mit IF-Modulen betrieben werden.

This document does not apply for the DigiCon-LBF (2083942).Dieses Dokument gilt nicht für DigiCon-LBF (2083942).

4.2 Pumps with different functionalities (variants)Pumpen mit abweichendem Funktionsumfang (Varianten)

For pumps of the series Stratos GIGA, Stratos GIGA B, BL-E, IP-E/DP-E or IL-E/DL-E functionality may vary.Für Pumpen der Baureihen Stratos GIGA, Stratos GIGA B, BL-E, IP-E/DP-E und IL-E/DL-E kann die Funktionalität abweichen.

If the menu item <5.7.2.0> "pressure correction" is not available on the pump display, the following functions are not available:Sollte bei einer Pumpe das Menü <5.7.2.0> „Druckwertkorrektur“ über das Display nicht zur Verfügung stehen, handelt es sich um eine Variante der Pumpe in der folgende Funktionen nicht zur Verfügung stehen:

5 Product informationAngaben über das Erzeugnis

5.1 Type keyTypenschlüssel

Example: CIF-Module Modbus RTUBeispiel: CIF-Modul Modbus RTU

Example: IF-Module ModbusBeispiel: IF-Modul Modbus

Example: IF-Module Modbus StratosBeispiel: IF-Modul Modbus Stratos

KeyBezeichnung DescriptionBeschreibung
CIF-ModuleCIF-ModulIF-ModuleIF-Modul Communication Interface ModuleCommunication Interface ModulInterface ModuleInterface Modul
Modbus Model/function identifier:Modell/Funktionsbezeichnung:
Modbus RTU = RS485 interface, Modbus RTU protocolModbus RTU = Schnittstelle RS485, Protokoll Modbus RTU
BACnet MS/TP = RS485 interface, BACnet MS/TP protocolBACnet MS/TP = Schnittstelle RS485, Protokoll BACnet MS/TP
Stratos suitable for this pump seriesGeeignet für diese Baureihe

Fig. 5.1.1: type keyAbb. 5.1.1: Typenschlüssel

5.2 Technical SpecificationTechnische Daten

Technical SpecificationTechnische Daten
General dataAllgemeine Daten
Terminal cross-section (finely stranded, no ferrules)Klemmquerschnitt (feindrähtig ohne Endhülsen) 1.5 mm² (max)
Electric circuitStromkreis SELV, galvanically isolatedSELV, galvanisch getrennt
mechanical mating cyclesSteckzyklen mechanisch 250
Safety according EN 60335Sicherheit nach EN 60335 mains voltage <=230 V TN/TT systemNetzspannung bis 230 V, TN/TT System
Interface Ethernet in accordance with IEEE 802.3Schnittstelle Ethernet nach IEEE 802.3
interfacesSchnittstellen 2 (integrated switch)2 (integrierter Switch)
Interface typeInterfacetyp Auto MDI-X
link typesVerbindungstyp 10BASE-T, 100BASE-TX (half/full duplex, autonegotiation)
connection typeAnschlusstyp RJ45 jack (screeened)RJ45 Buchse (geschirmt)
Cable lengthLeitungslänge 100 m (max)
Interface CAN in accordance with ISO 11898-2Schnittstelle CAN nach ISO 11898-2
Cable lengthLeitungslänge 200 m (max)
Termination resistorAbschlusswiderstand 120 Ω (integrated, switchable, default: off)120 Ω (integriert, schaltbar, Lieferzustand: aus)
Contact Input (Ext. Off/Min)Kontakteingang (Ext. Off/Min)
typeAusführung SELV, isolatedSELV, isoliert
ground referenceBezugsmasse shared with 0…10 V inputgemeinsam mit 0…10 V Eingang
open loop voltageLeerlaufspannung 10 V (max)
loop currentSchleifenstrom 10 mA (typical)10 mA (typisch)
Contact Output SBMKontaktausgang SBM
typeAusführung dry contact potentialfreier Kontakt
ratingBelastbarkeit 30 V AC/60 V DC: 1 A AC1/DC1 (SELV)
min. loadMinimallast 12 V DC / 10 mA
Control input 0…10 VSteuereingang 0…10 V
typeAusführung SELV, isolatedSELV, isoliert
ground referenceBezugsmasse shared with contact inputgemeinsam mit Kontakteingang
Voltage rangeSpannungsbereich 0…10 V
Input resistanceEingangswiderstand > 100 kΩ
Precision (full range)Genauigkeit (absolut) 5%
Absolute maximum input voltageSpannungsfestigkeit 24 V DC
Interface RS485 in accordance with TIA-485-ASchnittstelle RS485 nach TIA-485-A
Load (unit load)Last (Einheitlast) 1/8
Input voltageEingangsspannung Max. 12 V (differential A-B)Max. 12 V (differentiell A-B)
Termination resistorAbschlusswiderstand 120 Ω (integrated, switchable, default: off)120 Ω (integriert, schaltbar, Lieferzustand: aus)
Interface type TP/FT-10Schnittstelle TP/FT-10
cable typeLeitungstyp J-Y(St) Y 1 x 2 x 0,8 mm / CAT 5 AWG 22
cable lengthLeitungslänge 900 m with bus topology (terminated on both ends) with max. 3 m stub length900 m bei Bustopologie (mit Abschlusswiderstand) und max. 3 m langen Stichleitungen
450 m with free topology, with max. 250 m between two inter-communicating nodes450 m bei freier Topologie, dabei max. 250 m zwischen 2 untereinander kommunizierenden Knoten
Interface PLRSchnittstelle PLR
Interface typeSchnittstelle current loop (≅ 5 mA)Stromschleife (≅ 5 mA)
Cable lengthLeitungslänge 200 m (max / 0.5 mm²)
Double pump interface (DP)Doppelpumpenschnittstelle (DP)
Interface typeSchnittstelle Wilo specific, short circuit proof, polarity independentWilo-spezifisch, dauerkurzschlussfest, verdrehsicher
VoltageSpannung max. 10 Vppmax. 10 Vss
FrequencyFrequenz approx. 150 kHzca. 150 kHz
Cable lengthLeitungslänge max. 3 m
Digital sensor inputDigitale Sensor-Schnittstelle
Interface typeSchnittstelle 3.3 V digital, half duplex3,3 V digital, halb-duplex
Cable lengthLeitungslänge max. 3 m
Wireless interfaceDrathlos-Schnittstelle
Interface typeSchnittstelle Bluetooth® LE 4.0
profileProfil GATT peripheral server
Frequency bandFrequenzband 2400.0…2483.5 MHz
Maximum radiated transmission powerAbgestrahlte maximale Sendeleistung <10 dBm (EIRP)
Fig. 5.2.1: technical dataAbb. 5.2.1: technische Daten

Overview about ProgramIDs and neuron application versions (SW) of the CIF-Modules LON.Überblick über die ProgramIDs und Neuro-Applikations-Versionen (SW) der CIF-Module LON.

Version ProgramId RemarkBemerkung
1.1c 90:00:00:00:00:03:04:01 -
1.2 9F:FF:CC:00:00:03:04:02 -
1.3 9F:FF:CC:81:20:43:04:03 -
2.01 9F:FF:CC:51:14:06:04:04 -
2.02 9F:FF:CC:51:14:06:04:06 -
3.00 9F:FF:CC:51:14:06:04:05 -
4.00 9F:FF:CC:51:14:06:04:07 functionality same as 3.00, but program ID changed due to hardware modificationfunktional identisch zu 3.00, Program-ID wegen Hardwaremodifikation geändert
Fig. 5.2.2: LON program IDsAbb. 5.2.2: LON Programm-IDs

5.4 Standards

The CIF-Modules with protocol BACnet comply to ISO 16485-5:2017. For details refer to the PICS statement.Die CIF-Module mit Protokoll BACnet entsprechen ISO 16484-5:2017. Details finden Sie im PICS Statement (englisch).

5.4.1 BACnet Protocol Implementation Conformance Statement BACnet Revision 4

Date: 2019-01-22

Vendor Name: Wilo SE

Product Name: CIF-Module BACnet Stratos MS/TP

Product Model Number: 219036720978112097810

Application Software Version ≥: 1.012.00

Firmware Revision ≥: 4.102.26

BACnet Protocol Revision: 1.4

5.4.1.1 Product Description:

This product extends a Wilo device with a BACnet Interface as defined in this statement. It is mounted inside the device.

5.4.1.2 BACnet Standardized Device Profiles Supported (Annex L):

BACnet Smart Actuator (B-SA)

BACnet Smart Sensor (B-SS)

5.4.1.3 BACnet Interoperability Building Blocks Supported (Annex K):

Data Sharing Read Property Execute (DS-RP-B)

Data Sharing Write Property Execute (DS-WP-B)

Device Management Dynamic Object Binding (DM-DOB-B)

Device Management Dynamic Device Binding (DM-DDB-B)

Device Management Device Communication Control (DM-DCC-B)

5.4.1.4 Segmentation Capability:

The product does not support segmentation.

5.4.1.5 Standard Object Types Supported

Object type Object Supported Dynamically Creatable Dynamically Deletable Optional Properties Supported Optionally Writable Properties
Analog Input yes no no device-type  
Analog Output yes no no device-type  
Binary Input yes no no device-type  
Binary Output yes no no device-type  
Multistate Input yes no no device-type  
Multistate Output yes no no device-type  
Device yes no no location, description max-master

5.4.1.6 Data Link Layer Options:

MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400, 76800, 115200

MS/TP slave (Clause 9), baud rate(s): 9600, 19200, 38400, 76800, 115200

The device is configured as MS/TP slave if MAC address is set to 128 or higher, otherwise it is configured as MS/TP master.

5.4.1.7 Device Address Binding:

Static device binding is not supported.

5.4.1.8 Networking Options:

The product has no networking options.

5.4.1.9 Character Sets Supported:

ISO 10646 (UTF-8)

ISO 8859-1

Indicating support for multiple character sets does not imply that they can all be supported simultaneously.

5.4.1.10 Gateway Options:

This product does not support any gateway options.

5.4.1.11 Network Security Options:

Non-secure Device - is capable of operating without BACnet Network Security

- End of PICS statement for revision 4 -

5.4.2 BACnet Protocol Implementation Conformance Statement BACnet Revision 16

Date: 2020-12-15

Vendor Name: Wilo SE

Product Name: CIF-Module Ethernet Multiprotocol

Product Model Number: 2211408

Application Software Version ≥: 3.03

Firmware Revision ≥: 1.00

BACnet Protocol Revision: 1.16

5.4.2.1 Product Description:

This product extends a Wilo device with a BACnet Interface as defined in this statement. It is mounted inside the device.

5.4.2.2 BACnet Standardized Device Profiles Supported (Annex L):

BACnet Application Specific Controller (B-ASC

5.4.2.3 BACnet Interoperability Building Blocks Supported (Annex K):

Data Sharing Read Property Execute (DS-RP-B)

Data Sharing Read Property Execute (DS-RPM-B)

Data Sharing Write Property Execute (DS-WP-B)

Data Sharing Write Property Execute (DS-WPM-B)

Data Sharing Change of Value Execute (DS-COV-B)

Device Management Dynamic Object Binding (DM-DOB-B)

Device Management Dynamic Device Binding (DM-DDB-B)

Device Management Device Communication Control (DM-DCC-B)

5.4.2.4 Segmentation Capability:

⦻ Able to transmit segmented messages Window size 8

⦻ Able to receive segmented messages Window size 8

5.4.2.5 Standard Object Types Supported

Object type Object Supported Dynamically Creatable Dynamically Deletable Optional Properties Supported Optionally Writable Properties
Analog Input yes no no    
Analog Output yes no no    
Binary Input yes no no    
Binary Output yes no no    
Multistate Input yes no no    
Multistate Output yes no no    
Device yes no no location, description  

5.4.2.6 Data Link Layer Options:

BACnet/IP, (Annex J)

5.4.2.7 Device Address Binding:

Static device binding is not supported.

5.4.2.8 Networking Options:

The product has no networking options.

5.4.2.9 Character Sets Supported:

ISO 10646 (UTF-8)

Indicating support for multiple character sets does not imply that they can all be supported simultaneously.

5.4.2.10 Gateway Options:

This product does not support any gateway options.

5.4.2.11 Network Security Options:

Non-secure Device - is capable of operating without BACnet Network Security

- End of PICS statement for revision 16 -

The CIF-Modules CANopen comply to the following Die CIF-Module CANopen entsprechen folgenden CAN in Automation standardsStandards

The CIF-Modules LON complies to the following Die CIF-Module LON entsprechen folgenden LonMark International standards: Standards:

In order to get correct decoding of data, make sure that you have the resource files version 13.04 or later installed (available at Für eine korrekte Dekodierung der Daten ist die Installation der Resource Files Version 13.04 oder höher erforderlich. (Verfügbar bei LonMark International

If problems decoding data remain, you may refer to the online Wenn die Probleme bestehen bleiben, hilft evtl. die Online Referenz LONMARK type definition.Typ-Definition.

The CIF-Modules with protocol Modbus RTU comply to MODBUS APPLICATION PROTOCOL SPECIFICATION V1.1 and Modbus Serial line protocol V 1.02 in transmission mode RTU available at Die CIF-Module Modbus RTU entsprechen der MODBUS APPLICATION PROTOCOL SPECIFICATION V1.1 und dem dem Modbus over Serial Line protocol V 1.02 im Module mit Modus RTU, verfügbar unter modbus.org .

6 Description and functionBeschreibung und Funktion

The CIF-modules expand the device with communication capability for various standards.Die CIF-Module erweitern das Gerät mit Kommunikationsschnittstellen für diverse Standards.

Weitergehende Informationen finden Sie unter www.wilo.de/automation

Further information available at www.wilo.com/automation

6.1 DescriptionBeschreibung

The following description replaces the reference to the website and contains the detailed description of the objects. The EDE file is available for download at the URL given below.Die folgende Beschreibung ersetzt den Verweis auf die Webseite und enthält die detaillierte Beschreibung der BACnet-Objekte. Die EDE-Liste ist zum Download verfügbar unter der weiter unten angegebenen Adresse.

The IF-modules BACnet support MS/TP master functionality starting with firmware version (SW) 2.00. The firmware version can be found on the sticker on top of the module.Die IF-Module BACnet unterstützen die MS/TP Master-Funktionalität ab der Firmware Version (SW) 2.00 Die Firmware-Version ist auf dem Typenschild des Moduls aufgedruckt.

When writing NULL (no value) to all elements of the priority array, the BACnet standard defines that in this case the relinquish default shall be used as present value. Some of the commandable objects (i.e. outputs) need to have a floating default. with the BACnet 1.4 implementation, the relinquish default is static and the floating default is realized by a virtual write on priority 16.Wenn man NULL (kein Wert) in alle Element des Priority Array schreibt, schreibt der BACnet-Standard vor, dass dann der Relinquish Default als Present Value übernommen wird. Einige der Commandable Objects (Ausgänge) benötigen jedoch einen variablen Default-Wert. Dieses Verhalten wird in der BACnet 1.4 Implementierung durch einen virtuellen Schreibbefehl auf Priorität 16 realisiert.

The following description replaces the reference to the website and contains the detailed description of the objects. The .eds file is available for download at the URL given below.Die folgende Beschreibung ersetzt den Verweis auf die Webseite und enthält die detaillierte Beschreibung der BACnet-Objekte. Die .eds Datei ist zum Download verfügbar unter der weiter unten angegebenen Adresse.

This paragraph is intentionally empty.Dieser Abschnitt bleibt leer.

Two objects, the node object and pump object, are implemented in the IF-Module LON. The node object is used to control individual objects within the node; errors which occur in the individual objects are also indicated centrally here. Im IF-Modul LON sind 2 Objekte realisiert, das Knoten-Objekt und das Pumpen-Objekt. Das Knoten-Objekt dient zur Steuerung einzelner Objekte innerhalb des Knotens, hier werden auch zentral Fehler signalisiert, die in den einzelnen Objekten auftreten.

When registers are 32 Bits wide (including REAL), the the most significant part ist stored at the base address, the least significant part is stored at base address +1.Wenn Register 32 Bit-Werte (incl. REAL) enthalten, dann wird der höherwertige 16-Bit Teil im Register mit der Basisadresse gespeichert, der niederwertige 16-Bit Teil in der Basisadresse+1.

When registers are 64 Bits wide (including LREAL), the the most significant part ist stored at the base address, the least significant part is stored at base address +3.Wenn Register 64 Bit-Werte (incl. LREAL)enthalten, dann wird der höherwertigste 16-Bit Teil im Register mit der Basisadresse gespeichert, der niederwertigste 16-Bit Teil in der Basisadresse+3.

This paragraph is intentionally empty.Dieser Abschnitt bleibt leer.

NOTEHINWEIS

6.1.1 Command priorityBefehlshierarchie

Beside the normal on/off control of the pump there are several methods to override this. The following list shows the priority of those commands. Lower numbers have higher priorityNeben der normalen Ein/Aus Steuerung der Pumpe gibt es mehrere Möglichkeiten, diese zu übersteuern. Die folgende Liste zeigt die Prioritäten, wobei eine niedrigere Nummer eine höhere Priorität bedeutet.

  1. Ext. off input at pumpExt. off Eingang an der Pumpe
  2. Override offOverride off (Übersteuerung Aus)
  3. Override maxOverride max (Übersteuerung Max)
  4. Override minOverride min (Übersteuerung Min)
  5. Override onOverride on (Übersteuerung Ein)

6.1.2 CompatibilityKompatibilität

This paragraph is intentionally empty.Dieser Abschnitt bleibt leer.

6.1.2.1 Function Δp-c= F(T)Funktion Δp-c = F(T)

For pumps from the Stratos series a simple fluid temperature dependent variation of the delivery head was available as control function. Via IF-module, IR-Monitor or even IR-Stick, adjustment of parameters Tmin / Tmax and p(Tmin) / p(Tmax) was possible.Für Pumpen der Baureihe Stratos gab es diese einfache Funktion zur temperaturabhängigen Sollwert-Vorgabe. Über das IF-Modul konnten die Parameter Tmin, Tmax bzw. p(Tmin), p(Tmax) über den Bus bzw. IR-Monitor oder IR-Stick gewählt werden.

Pumps with CIF-Modules support a full featured constant temperature control with a sensor mounted directly in the fluid. The datapoints for the legacy function are still existing but without any function.Pumpen mit CIF-Modul unterstützen statt dessen eine vollwertige Konstanttemperatur-Regelung mit Sensor direkt im Medium. Die Datenpunkte der bisherigen Funktion sind aus Kompatibilitätsgründen noch vorhanden, aber funktionslos.

For usage of this function, select the mode "T-const" from the basic control functions.Zur Verwendung wird im Pumpenmenü aus den Basisregelungsarten "T-const" ausgewählt.

As setpoint source "internal setpoint" has to be selected.Als Sollwert-Quelle wird "interner Sollwert" gewählt.

A simple approach for adjustment may be to select the mean value of former Tmin and Tmax values as setpoint for the temperature control. There is no general recommendation for the settings. Also WILO does not guarantee full compatibility between Δp-c = F(T) and T-const control.Ein einfacher Startpunkt für die Einstellung ist, den bisherigen Mittelwert aus Tmax und Tmin als Sollwert für die Temperaturregelung zu verwenden. Eine allgemeine Empfehlung für die Umrechnung der Werte kann nicht gegeben werden. Auch übernimmt WILO keine Gewähr für die vollständige Kompatibilität der Funktionen Δp-c = F(T) und T-const.

6.1.2.2 LON firmware changeLON Firmware-Änderung

The CIF-module LON has a program memory which can be deleted and overwritten to allow subsequent software updates to be loaded into this memory via the LON bus.Das CIF-Modul LON besitzt einen lösch- und wiederbeschreibbaren Programmspeicher, sodass ein späteres Software-Update über den LON-Bus in diesen Speicher geladen werden kann.

When CIF-Modules LON with an older software version (prior to 3.00) are replaced by version 3.00 or higer , an application software downgrade is not possible due to hardware reasons. The module has a new program ID and a new link must be created within the project.Bei Austausch eines CIF-Moduls LON mit einer älteren Software-Version (vor 3.00) ist ein Software downgrade aus Hardwaregründen nicht möglich und somit ein Knotentausch nicht ausreichend. Das Modul hat eine neue Programm-ID und muss im Projekt neu verknüpft werden.

6.1.2.3 LON variables nviRemotePress / nviRemoteTempLON Variablen nviRemotePress / nviRemoteTemp

The usage of remote sensors is currently non functional with CIF-ModulesDie Verwendung von Remote-Sensorwerten ist bei CIF-Modulen derzeit nicht möglich.

In case of replacement the pressure or temperature control functionality has to be moved to the DDC controller and the pump should be used as an actuator in constant speed mode.Im Fall des Ersatzes einer Pumpe mit dieser Funktionalität muss der Druck- bzw. Temperaturregler in die Steuerung verschoben werden. Die Pumpe kann dann als Drehzahlsteller agieren.

6.1.2.4 LON WINK serviceLON WINK Service

If the IF-module receives a "wink" command via the LON bus, a corresponding command is sent to the pump also in this condition and the "Id" indication is displayed at the pump for 30 s.Erhält das IF-Modul über den LON-Bus ein "Wink"-Kommando, so wird ein entsprechendes Kommando zur Pumpe gesendet und an der Pumpe erscheint die "Id"-Anzeige für 30 s.

The "wink" function is not available for CIF-modules.Die "Wink"-Funktion ist für CIF-Module nicht verfügbar.

6.1.2.5 CIF-Modules - details of Master and/or SlaveCIF-Module - Details von Master oder Slave

For CIF modules, the data of the master and slave pump are not available individually (even if defined on the interface for compatibility). Only data of the system is provided. To achieve maximum compatibility in existing applications, all datapoints with the scope "master" show values of the pump system while all datapoints with the scope "slave" deliver the error value (if applicable) or a static value. Nevertheless, the pump on signal of the slave is provided individually.Für CIF-Module gibt es keine individuellen Daten von Master oder Slave (auch wenn dies am Interface aus Kompatibilitätsgründen definiert sein sollte). Nur Daten des Pumpensystems werden übermittelt. Für maximale Kompatibilität in Bestandssystemen werden bei allen Datenpunkten, die sich auf den Master beziehen, die Werte des Systems übermillelt. Bei Daten die die sich auf den Slave beziehen, wird - soweit anwendbar - der Fehlerwert bzw. ein statischer Wert übermittelt. In jedem Fall wird die Meldung "Pump On" individuell übermittelt.

6.1.3 ScalingSkalierung

When a scale is mentioned in the following sections, this is always a presentation scale. Read values have to be multiplied by this factor to get the result for presentation.Wenn in den folgenden Abschitten eine Skalierung angegeben ist, dann handelt es sich um einen Präsentationsfaktor. Ein gelesener Wert muss mit diesem Faktor multipliziert werden, um den Anzeigewert zu erhalten.

The setpoint (duty point (rel.)) is defined as a percentage. To scale to absolute values, you may use one of the values speed max-pres value / max pressure dp-c / max pressure dp-v which represent 100 % for the specific control function. A more generic approach is available for software versions 3.00 or higher. Here we provide a duty point 100% value indication the absolute value corresponding 100 %, the physical unit of this 100 % value (duty point (rel.) units) and additionally the relative limits of the duty point (duty point (rel.) min.-output / duty point (rel.) max.-output). Details are shown below:Der Sollwert (duty point (rel.)) ist als Prozentwert definiert. Zur Skalierung auf absolute Werte können Sie einen der Werte speed max-pres value / max pressure dp-c / max pressure dp-v benutzen, welche den jeweiligen 100 % Wert für die jeweilge Regelungsfunktion darstellen. Eine von der Regelungsfunktion unabhängige Definition ist ab der Software-Version 3.00 verfügbar. Hier wird die 100 % Referenz als absoluter Wert, die dazugehörige physikalische Einheit (duty point (rel.) units) und die relativen Grenzen (duty point (rel.) min.-output / duty point (rel.) max.-output) zur Verfügung gestellt (siehe nachfolgende Übersicht).

Name register typeRegister-Typ addressAdresse functionFunktion
duty point (rel.) Holding_register 1 in
duty point (rel.) Holding_register 1 in
duty point (rel.) Input_register 200 active
duty point (rel.) Input_register 200 active
duty point (rel.) maximum-output Input_register 202 active
duty point (rel.) maximum-output Input_register 202 active
duty point (rel.) minimum-output Input_register 204 active
duty point (rel.) minimum-output Input_register 204 active
duty point (rel.) units Input_register 208 active
duty point (rel.) units Input_register 208 active
duty point (rel.) Input_register 400 out
duty point (rel.) Input_register 400 out
nameName Objekttypobject type instanceInstanz functionFunktion
Bus Setpoint in analog-output 0 in
Bus Setpoint in analog-output 0 in
duty point (rel.) max.-outp. active analog-input 32 active
duty point (rel.) min.-outp. active analog-input 31 active
duty point (rel.) active analog-input 34 active
duty point (rel.) max.-outp. active analog-input 32 active
duty point (rel.) min.-outp. active analog-input 31 active
duty point (rel.) active analog-input 34 active
duty point (rel.) units active multistate-input 33 active
duty point (rel.) units active multistate-input 33 active
System Effective Capacity out analog-input 0 out
System Effective Capacity out analog-input 0 out

6.1.4 Data typesDatentypen

data typeDatentyp Bit min max encodingKodierung descriptionBeschreibung
BOOL 1 0 1 Boolesch (Bit) - kann FALSE oder TRUE sein
BOOL 1 0 1 boolean (bit) - can be true or false
BYTE 8 0 255 used for e.g. bitsets, no error value
BYTE 8 0 255 für allgemeine Anwendung, kein Fehlerwert definiert
DATE 32 Datum
DATE 32 date
DINT 32 -2147483648 2147483647 Vorzeichenbehafteter ganzzahliger Wert
DINT 32 -2147483648 2147483647 signed numeric value
DT 32 Eingangswert: dieser Wert wird in das Gerät geschrieben (z. B. Sollwert, Schaltbefehl, Parameter)
DT 32 input value: this value is written to the device (e.g. setpoint, command or parameter)
DWORD 32 0 4294967295 used for e.g. bitsets, no error value
DWORD 32 0 4294967295 für allgemeine Anwendung, kein Fehlerwert definiert
INT 16 -32768 32767 Vorzeichenbehafteter ganzzahliger Wert
INT 16 -32768 32767 signed numeric value
LINT 64 Vorzeichenbehafteter ganzzahliger Wert
LINT 64 signed numeric value
LREAL 64 Gleitpunktzahl nach IEEE754
LREAL 64 floating point value according IEEE754
LWORD 64 used for e.g. bitsets, no error value
LWORD 64 für allgemeine Anwendung, kein Fehlerwert definiert
REAL 32 -3.4028234663852886e38 3.4028234663852886e38 Gleitpunktzahl nach IEEE754
REAL 32 -3.4028234663852886e38 3.4028234663852886e38 floating point value according IEEE754
SINT 8 -128 127 Vorzeichenbehafteter ganzzahliger Wert
SINT 8 -128 127 signed numeric value
STRING US-ASCII Zeichenfolge unterschiedlicher Länge mit deklarierter Maximallänge
STRING US-ASCII string with variable length up to declared maximum size
TIME 32 Tageszeit bis 24 h (Auflösung 1 ms)
TIME 32 time of day up to 24 hours (resolution 1 ms)
TIME_OF_DAY 32 time of day
TIME_OF_DAY 32 Zeit des Tages
UDINT 32 0 4294967295 Vorzeichenloser ganzzahliger Wert
UDINT 32 0 4294967295 unsigned numeric value
UINT 16 0 65535 Vorzeichenloser ganzzahliger Wert
UINT 16 0 65535 unsigned numeric value
ULINT 64 used for e.g. bitsets, no error value
ULINT 64 für allgemeine Anwendung, kein Fehlerwert definiert
USINT 8 0 255 Vorzeichenloser ganzzahliger Wert
USINT 8 0 255 unsigned numeric value
WORD 16 0 65535 used for e.g. bitsets, no error value
WORD 16 0 65535 für allgemeine Anwendung, kein Fehlerwert definiert
WSTRING UNICODE Zeichenfolge unterschiedlicher Länge mit deklarierter Maximallänge
WSTRING UNICODE string with variable length up to declared maximum size
Fig. 6.1.4: data typesAbb. 6.1.4: Datentypen

6.1.5 Error ValuesFehlerwerte

In the subsequent sections, the keyword "error value" appears in the functional description. If a read value is identical to the error value, it indicates that the reading is not available or invalid. Sometimes error values are also indicated for write values. In this case, writing the error value may invalidate the functionality of this datapoint.In den folgenden Abschnitten wird das Schlüsselwort "Fehlerwert" verwendet. Wenn ein gelesener Datenpunkt den Fehlerwert enthält, ist der Wert nicht verfügbar oder ungültig. Für Datenpunkte, die geschrieben werden, kann mit dem Fehlerwert die Funktion des Datenpunkts ggfs. ausgeschaltet werden.

6.1.6 Synchronizing dataDaten synchronisieren

In general, several parameters can be written to the pump not only from the specified setpoint source, but also from other sources like HMI or a remote control. The write access is typically possible in parallel to the write access from the CIF-module. Normally the last write wins, independent of the source. To realize that, values from the interface are forwarded to the pump on change. If you want to guarantee that a desired value is forced, you should first read the active value from the pump, write that back to the input and then write the value to be forced. With this principle we ensure that writing from serveral sources in parallel works as desired - especially in combination with gateways, where some of them repeat writing in a timer cycle regardless of a value change.Unabhängig von der Sollwertquelle können über das HMI oder auch eine Fernbedienung verschiedene Parameter eingestellt werden. Der Schreibzugriff ist dabei in der Regel parallel zum CIF-Modul möglich. Hierbei gewinnt der letzte Befehl, unabhängig von der Quelle. Damit dies funktioniert, werden Eingangswerte zur Pumpe nur bei Änderung geschrieben. Wollen Sie einen bestimmten Wert über die Schnittstelle forcieren, so ist zunächst aktive Wert zu lesen, zu schreiben und dann der gewünschte Wert zu schreiben. Nur so ist gewährleistet, dass ein Schreiben aus verschiedenen Quellen funktioniert - insbesondere in Verbindung mit Gateways, die zum Teil zyklisch schreiben.

To monitor a change of value from HMI or remote control, the "active" value can be read from the pump and compared with the current value to be written.Um einen Wertänderung vom HMI oder über eine Fernbedienung zu erkennen, kann der aktive Wert aus der Pumpe gelesen werden und mit dem eigenen Schreibwert verglichen werden.

6.1.7 Input SelectorUmschaltung Eingangssignale

To allow a glitch free switchover between two duty points, independent sets of input signals are available. For normal operation you may use the ones without special purpose. For an auxiliary set, you may use the ones with special purpose ´aux´. The ones with special purpose ´preset` are used for fallback by the bus command timer. Für eine störungsfreie Umschaltung zwischen zwei Arbeitspunkten sind unabhängige Sets von Eingangsvariablen verfügbar. Für den Normalbetrieb könnnen Sie die Variable ohne Sonderfunktion verwenden. für einen zweiten Arbeitspunkt sind die Variablen mit der Sonderfunktion ´aux´ verfügbar. Die Variablen mit der Sonderfunktion ´preset´ werden als Rückfallwerte in Verbindung mit dem Bus Command Timer verwendet.

Name register typeRegister-Typ Address special purposeSonderfunktion
duty point (rel.) Holding_register 1
duty point (rel.) Holding_register 1
duty point (rel.) aux. Holding_register 412 aux.
duty point (rel.) aux. Holding_register 412 aux.
duty point (rel.) preset Holding_register 402 preset
duty point (rel.) preset Holding_register 402 preset
Pump on Holding_register 40
Pump on Holding_register 40
Pump on aux. Holding_register 414 aux.
Pump on aux. Holding_register 414 aux.
Pump on preset Holding_register 404 preset
Pump on preset Holding_register 404 preset
Control Function Holding_register 42
Control Function Holding_register 42
Control Function aux. Holding_register 413 aux.
Control Function aux. Holding_register 413 aux.
Control Function preset Holding_register 403 preset
Control Function preset Holding_register 403 preset
Setpoint Signal Source Holding_register 401
Setpoint Signal Source Holding_register 401
Setpoint Signal Source aux. Holding_register 415 aux.
Setpoint Signal Source aux. Holding_register 415 aux.
Setpoint Signal Source preset Holding_register 405 preset
Setpoint Signal Source preset Holding_register 405 preset
Fig. 6.1.7: datapoints for input selectorAbb. 6.1.7: Datenpunkte für Umschaltung Eingangssignale
nameName object typeObjekttyp instanceInstanz special purposeSonderfunktion
Bus Setpoint in analog-output 0
Bus Setpoint in analog-output 0
duty point (rel.) aux. in analog-output 200 aux.
duty point (rel.) aux. in analog-output 200 aux.
duty point (rel.) preset in,A analog-output 100 preset
duty point (rel.) preset in,A analog-output 100 preset
Bus Command Pump on in binary-output 0
Bus Command Pump on in binary-output 0
Pump on aux. in binary-output 200 aux.
Pump on aux. in binary-output 200 aux.
Preset Command Pump on preset in,A binary-output 100 preset
Preset Command Pump on preset in,A binary-output 100 preset
Bus Control Mode in multistate-output 0
Bus Control Mode in multistate-output 0
Control Function aux. in multistate-output 200 aux.
Control Function aux. in multistate-output 200 aux.
Control Function preset in,A multistate-output 100 preset
Control Function preset in,A multistate-output 100 preset
Setpoint Signal Source in multistate-output 3
Setpoint Signal Source in multistate-output 3
Setpoint Signal Source aux. in multistate-output 203 aux.
Setpoint Signal Source aux. in multistate-output 203 aux.
Setpoint Signal Source preset in,A multistate-output 101 preset
Setpoint Signal Source preset in,A multistate-output 101 preset
Fig. 6.1.7: datapoints for input selectorAbb. 6.1.7: Datenpunkte für Umschaltung Eingangssignale

6.1.8 datapoint tablesDatenpunkt-Tabellen

The following table explains the different ´function` values for each datapoint:Die folgende Tabelle erläutert den Zusammenhang zwischen den verschieden Werten der Zeile ´Funktion` bei den Datenpunkt-Beschreibungen:

symbolSymbol Name: Beschreibung
A Rücklesewert Eingang (A): dieser Wert ist entweder der Eingangswert selbst, oder aber ein direkt davon abgeleiteter (z.B. aktuelle Grenzen für den Eingangswert). In jedem Fall ist der Wert vor einem eventuell vorhandenem Parameter-Selektor gemeint.
A readback input value (A): this value is either the input value itself or a value which is directly derived from the input value (e.g. a limit for the input value)
B value after parameter set selector (B): this value is read after signal processing by an optionally available parameter set selector
B Wert nach Parametersatz-Selektor (B): dieser Wert wird nach der Verarbeitung durch einen optionalen Parametersatz-Selektor gelesen
active aktiver Wert: dieser Wert ist im Gerät aktiv und ist der tatsächlich benutzte Wert für eine Funktion (z. B. begrenzter Sollwert)
active active value: this value is actively used in the device (e. g. limited setpoint)
in Eingangswert: dieser Wert wird in das Gerät geschrieben (z. B. Sollwert, Schaltbefehl, Parameter)
in input value: this value is written to the device (e.g. setpoint, command or parameter)
out Ausgangswert: dieser Wert ist das Ergebnis des Prozesses im Gerät (z. B. Prozesserte wie Durchfluss, Temperatur, aber auch der tatsächliche Arbeitspunkt, der sich aus dem Eingangswert 'Sollwert' ergibt)
out output value: this value is the result of the processing inside device
Fig. 6.1.8: symbols in datapoint dtablesAbb. 6.1.8: Symbole in Datenpunkt-Tabellen

6.2 FunctionFunktion

Interfaces/ modulesSchnittstellen/Module Ext. Off Stratos Ext. Min Stratos Ext. Off/SBM Stratos SBM Stratos DP Stratos Modbus Stratos BACnet Stratos CAN Stratos LON Stratos PLR Stratos Smart-IF Stratos
InterfacesSchnittstellen
dry contact inputKontakteingang                
dry contact outputPotentialfreier Kontakt                  
analog input 0…10 VAnalogeingang 0…10 V                
digital sensor interfacedigitale Sensor-Schnittstelle                    
CAN 2.0A                  
RS485                  
LON TP/FT-10                    
Bluetooth LE                    
WILO PLR                    
dual pumpDoppelpumpe  
FunctionsFunktionen
Override OFF controlVorrang Aus                  
Override Min controlVorrang Min                    
Setpoint ControlSollwert-Steuerung    
run signal (SBM)Betriebsmeldung (SBM)      
BACnet                    
Modbus RTU                    
CANopen                    
WILO Net                    
digital temperature inputdigitaler Temperatureingang                     2
Fig. 6.2.1: CIF-module functionsAbb. 6.2.1: CIF-Module Funktionen

6.2.0 Analog Inputs (AI)Analoge Eingänge (AI)

instanceInstanz nameName
0 System Effective Capacity out
1 Speed out MA
2 Flow (calculated) out
3 Pressure out
4 Power Rating out
5 Medium Temperature out
6 Operation Time out
7 Consumption (System) out
8 Speed min-pres-value active
9 Speed max-pres-value active
10 Min Pressure dp-v active
11 Max Pressure dp-v active
12 Flow (calculated) max-pres-value out
13 Min Pressure dp-c active
14 Max Pressure dp-c active
15 power input max-pres-value out
16 temperature fluid forward out
17 temperature fluid return out
18 Analog In 1 Measured Val. out
19 Analog In 2 Measured Val. out
20 power heating out
21 power refrigeration out
22 Energy heat. rst.able out
23 Energy heat. rst.able strt.-tm. out
24 Energy refrig. rst.able out
25 Energy refrig. rst.able strt.-tm. out
26 Energy heating total out
27 Energy refrigeration total out
28 Voltage Input out
29 Electrical Current out
30 System Time out
31 duty point (rel.) min.-outp. active
32 duty point (rel.) max.-outp. active
33 duty point 100 % value active
34 duty point (rel.) active
35 Bus Command Timer Time remain. out
36 Flow (calculated) limit. min active
37 Flow (calculated) limit. max active
38 Flow (calculated) limit. off active
39 Flow nominal for Ctrl. Fun. active
40 Flow zero setpoint red. factor active
48 Analog In 3 Measured Val. out
49 Analog In 4 Measured Val. out
90 Debug ID Out out
91 Debug Value out
1031 duty point (rel.) min.-outp. A
1032 duty point (rel.) max.-outp. A
1033 duty point 100 % value A
1034 duty point (rel.) B
1131 duty point (rel.) preset min.-outp. A
1132 duty point (rel.) preset max.-outp. A
1133 duty point 100 % value preset A
1231 duty point (rel.) aux. min.-outp. A
1232 duty point (rel.) aux. max.-outp. A
1233 duty point 100 % value aux. A
2009 temperature reference T1 B
2010 temperature reference T2 B
2031 duty point (rel.) min.-outp. B
2032 duty point (rel.) max.-outp. B
2033 duty point 100 % value B
3015 Flow replacement value active

6.2.0.0 System Effective Capacity out

propertyEigenschaft valueWert
instance #Instanz-Nr. 0
unitEinheit %
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device. Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.1 Speed out MA

propertyEigenschaft valueWert
instance #Instanz-Nr. 1
unitEinheit 1/min
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows the rotational speed of the pump. (Master-Pump)Dieses Signal ist das Grundsignal. Dieses Signal liefert die Drehzahl der Pumpe. (Master-Pumpe)

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos; IL_E, …; MVIE, …;

6.2.0.2 Flow (calculated) out

propertyEigenschaft valueWert
instance #Instanz-Nr. 2
unitEinheit m³/h
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the (calculated) flow. Calculated values are not suitable for closed loop control applications due to restricted availibility and precision over the range of operation. Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den (berechneten) Durchfluss. Bei berechneten Werten sollte dieser Wert nicht für geschlossene Regelkreise verwendet werden, da die Genauigkeit und Verfügbarkeit nicht in allen Betriebspunkten gewährleistet werden kann.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.0.3 Pressure out

propertyEigenschaft valueWert
instance #Instanz-Nr. 3
unitEinheit bar
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the current pressure at the pump system. Depending on the sensor arrangement, this value is an absolute or a differential pressure. It can also be a signal of a remote sensor. Some pump type operate without a pressure sensor. In this case, the value is calculated. Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den Druck-Istwert an der Pumpe. Je nach Sensoranordnung ist dies ein Absolut- oder Differenzdruck oder auch ein Signal von einem abgesetzen Sensor. Einige Pumpentypen arbeiten sensorlos, dort ist es ein berechneter Wert.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.0.4 Power Rating out

propertyEigenschaft valueWert
instance #Instanz-Nr. 4
unitEinheit W
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the current electrical input power. Dieses Signal ist das Grundsignal. Dieses Signal liefert die aktuelle elektrische Eingangsleistung.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.0.5 Medium Temperature out

propertyEigenschaft valueWert
instance #Instanz-Nr. 5
unitEinheit °C
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows the measurement value of the fluid temperature sensor. It can also be a remote sensor signal. Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert liefert den Meßwert für die Medientemperatur. Dies kann auch ein Wert von einem abgesetzten Sensor sein.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos;

6.2.0.6 Operation Time out

propertyEigenschaft valueWert
instance #Instanz-Nr. 6
unitEinheit min
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This value represents the total time where the device was running (motor turning). Dieses Signal ist das Grundsignal. Dieser Wert zeigt die gesamte Zeit während der das Gerät in Betrieb war (drehender Motor).

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.0.7 Consumption (System) out

propertyEigenschaft valueWert
instance #Instanz-Nr. 7
unitEinheit kWh
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This value represent the totally consumed electrical energy. This value is suitable for an energy performance evaluation. Dieses Signal ist das Grundsignal. Dieser Wert repräsentiert die bisher aufgenommene elektrische Energie (Energiezähler). Er dient zur Einschätzung des Verbrauchs.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.0.8 Speed min-pres-value active

propertyEigenschaft valueWert
instance #Instanz-Nr. 8
unitEinheit 1/min
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows the rotational speed of the pump. Dieses Signal ist das Grundsignal. Dieses Signal liefert die Drehzahl der Pumpe.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos; IL_E, …; MVIE, …;

6.2.0.9 Speed max-pres-value active

propertyEigenschaft valueWert
instance #Instanz-Nr. 9
unitEinheit 1/min
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows the rotational speed of the pump. Dieses Signal ist das Grundsignal. Dieses Signal liefert die Drehzahl der Pumpe.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos; IL_E, …; MVIE, …;

6.2.0.10 Min Pressure dp-v active

propertyEigenschaft valueWert
instance #Instanz-Nr. 10
unitEinheit bar
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows the minimum possible pressure setpoint in the operation mode Δ p-v.Dieses Signal ist das Grundsignal. Dieses Signal liefert den minimal möglichen Druck-Sollwert in der Regelart Δ p-v.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.0.11 Max Pressure dp-v active

propertyEigenschaft valueWert
instance #Instanz-Nr. 11
unitEinheit bar
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows the maximum possible pressure setpoint for the operation mode Δ p-v. It can be used to scale a setpoint in percent back to the physical unit. For multistage pumps, this value is not the maximum head of the pump, but the measurement range of the sensor.Dieses Signal ist das Grundsignal. Dieses Signal liefert den maximal möglichen Soll-Druck in der Regelart Δ p-v. Es kann benutzt werden um einen in % skalierten Sollwert oder Istwert auf die physikalische Größe zu skalieren. Bei Multistage Pumpen ist dies der Meßbereich des Sensors, nicht der Maximaldruck der Pumpe.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.0.12 Flow (calculated) max-pres-value out

propertyEigenschaft valueWert
instance #Instanz-Nr. 12
unitEinheit m³/h
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the (calculated) flow. Calculated values are not suitable for closed loop control applications due to restricted availibility and precision over the range of operation.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den (berechneten) Durchfluss. Bei berechneten Werten sollte dieser Wert nicht für geschlossene Regelkreise verwendet werden, da die Genauigkeit und Verfügbarkeit nicht in allen Betriebspunkten gewährleistet werden kann.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.0.13 Min Pressure dp-c active

propertyEigenschaft valueWert
instance #Instanz-Nr. 13
unitEinheit bar
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows the minimum possible pressure setpoint in the operation mode Δ p-c.Dieses Signal ist das Grundsignal. Dieses Signal liefert den minimal möglichen Druck-Sollwert in der Regelart Δ p-c.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.0.14 Max Pressure dp-c active

propertyEigenschaft valueWert
instance #Instanz-Nr. 14
unitEinheit bar
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows the maximum possible pressure setpointfor the operation mode Δ p-c. It can be used to scale a setpoint in percent back to the physical unit. For multistage pumps, this value is not the maximum head of the pump, but the measurement range of the sensor.Dieses Signal ist das Grundsignal. Dieses Signal liefert den maximal möglichen Soll-Druck in der Regelart Δ p-c. Es kann benutzt werden um einen in % skalierten Sollwert oder Istwert auf die physikalische Größe zu skalieren. Bei Multistage Pumpen ist dies der Meßbereich des Sensors, nicht der Maximaldruck der Pumpe.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.0.15 power input max-pres-value out

propertyEigenschaft valueWert
instance #Instanz-Nr. 15
unitEinheit W
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the current electrical input power.Dieses Signal ist das Grundsignal. Dieses Signal liefert die aktuelle elektrische Eingangsleistung.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.0.16 temperature fluid forward out

propertyEigenschaft valueWert
instance #Instanz-Nr. 16
unitEinheit °C
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represents the forward fluid temperature of the hydronic circuit.Dieses Signal ist das Grundsignal. Dieses Signal liefert die Vorlauftemperatur im hydraulischen Kreis

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.17 temperature fluid return out

propertyEigenschaft valueWert
instance #Instanz-Nr. 17
unitEinheit °C
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represents the return fluid temperature of the hydronic circuit.Dieses Signal ist das Grundsignal. Dieses Signal liefert die Rücklauftemperatur im hydraulischen Kreis

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.18 Analog In 1 Measured Val. out

propertyEigenschaft valueWert
instance #Instanz-Nr. 18
unitEinheit -
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represents the measured value of the analog input #1.Dieses Signal ist das Grundsignal. Dieses Signal liefert den Messwert des Analogeingangs # 1.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.19 Analog In 2 Measured Val. out

propertyEigenschaft valueWert
instance #Instanz-Nr. 19
unitEinheit -
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represents the measured value of the analog input #2.Dieses Signal ist das Grundsignal. Dieses Signal liefert den Messwert des Analogeingangs # 2.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.20 power heating out

propertyEigenschaft valueWert
instance #Instanz-Nr. 20
unitEinheit W
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal shows the heating power in the measured hydronic circuit. Dieses Signal ist das Grundsignal. Dieses Signal liefert die Wärmeleistung im gemessenen hydraulischen Kreis.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.21 power refrigeration out

propertyEigenschaft valueWert
instance #Instanz-Nr. 21
unitEinheit W
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal shows the refrigeration power in the measured hydronic circuit.Dieses Signal ist das Grundsignal. Dieses Signal liefert die Kälteleistung im gemessenen hydraulischen Kreis.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.22 Energy heat. rst.able out

propertyEigenschaft valueWert
instance #Instanz-Nr. 22
unitEinheit kWh
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal shows the accumulated heating energy in the measured hydronic circuit. This value can be resetted. N.B.: Reset is not necessarily possible on this interface This is the base signal. This signal shows the accumulated heating energy in the measured hydronic circuit. This value can be resetted. N.B.: Reset is not necessarily possible on this interface Dieses Signal ist das Grundsignal. Dieses Signal liefert die Wärmemenge im gemessenen hydraulischen Kreis. Dieser Wert kann zurückgesetzt werden. Hinweis: Der Reset ist nicht unbedingt über dieses Interface möglich.Dieses Signal ist das Grundsignal. Dieses Signal liefert die Wärmemenge im gemessenen hydraulischen Kreis. Dieser Wert kann zurückgesetzt werden. Hinweis: Der Reset ist nicht unbedingt über dieses Interface möglich.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.23 Energy heat. rst.able strt.-tm. out

propertyEigenschaft valueWert
instance #Instanz-Nr. 23
unitEinheit s (1970-01-01 0:00 UTC)
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal shows the accumulated heating energy in the measured hydronic circuit. This value can be resetted. N.B.: Reset is not necessarily possible on this interface Dieses Signal ist das Grundsignal. Dieses Signal liefert die Wärmemenge im gemessenen hydraulischen Kreis. Dieser Wert kann zurückgesetzt werden. Hinweis: Der Reset ist nicht unbedingt über dieses Interface möglich.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.24 Energy refrig. rst.able out

propertyEigenschaft valueWert
instance #Instanz-Nr. 24
unitEinheit kWh
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal shows the accumulated refrigeration energy in the measured hydronic circuit. This value can be resetted. N.B.: Reset is not necessarily possible on this interface Dieses Signal ist das Grundsignal. Dieses Signal liefert die Kältemenge im gemessenen hydraulischen Kreis. Dieser Wert kann zurückgesetzt werden. Hinweis: Der Reset ist nicht unbedingt über dieses Interface möglich.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.25 Energy refrig. rst.able strt.-tm. out

propertyEigenschaft valueWert
instance #Instanz-Nr. 25
unitEinheit s (1970-01-01 0:00 UTC)
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal shows the accumulated refrigeration energy in the measured hydronic circuit. This value can be resetted. N.B.: Reset is not necessarily possible on this interface Dieses Signal ist das Grundsignal. Dieses Signal liefert die Kältemenge im gemessenen hydraulischen Kreis. Dieser Wert kann zurückgesetzt werden. Hinweis: Der Reset ist nicht unbedingt über dieses Interface möglich.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.26 Energy heating total out

propertyEigenschaft valueWert
instance #Instanz-Nr. 26
unitEinheit kWh
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal shows the accumulated heating energy in the measured hydronic circuit. This value cannot be resetted.Dieses Signal ist das Grundsignal. Dieses Signal liefert die Wärmemenge im gemessenen hydraulischen Kreis. Dieser Wert kann nicht zurückgesetzt werden.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.27 Energy refrigeration total out

propertyEigenschaft valueWert
instance #Instanz-Nr. 27
unitEinheit kWh
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal shows the accumulated refrigeration energy in the measured hydronic circuit. This value cannot be resetted.Dieses Signal ist das Grundsignal. Dieses Signal liefert die Kältemenge im gemessenen hydraulischen Kreis. Dieser Wert kann nicht zurückgesetzt werden.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.28 Voltage Input out

propertyEigenschaft valueWert
instance #Instanz-Nr. 28
unitEinheit V
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represents the input voltage.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert die Eingangsspannung.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.0.29 Electrical Current out

propertyEigenschaft valueWert
instance #Instanz-Nr. 29
unitEinheit A
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represents the electrical input current. Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den aktuellen elektrischen Eingangsstrom .

Support referenceWird unterstützt durch:

Stratos; IL_E, … MVIE, …(0.55…7.5 kW);

6.2.0.30 System Time out

propertyEigenschaft valueWert
instance #Instanz-Nr. 30
unitEinheit s (1970-01-01 0:00 UTC)
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. The time information used for the system is available here. Starting point is 1970-01-01 0:00 UTC.This is the base signal. The time information used for the system is available here. Starting point is 1970-01-01 0:00 UTC.Dieses Signal ist das Grundsignal. Die Systemzeit wird über dieses Signal abgebildet. Startwert ist der 1.1.1970 0:00 UTCDieses Signal ist das Grundsignal. Die Systemzeit wird über dieses Signal abgebildet. Startwert ist der 1.1.1970 0:00 UTC

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.31 duty point (rel.) min.-outp. active

propertyEigenschaft valueWert
instance #Instanz-Nr. 31
unitEinheit %
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.32 duty point (rel.) max.-outp. active

propertyEigenschaft valueWert
instance #Instanz-Nr. 32
unitEinheit %
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.33 duty point 100 % value active

propertyEigenschaft valueWert
instance #Instanz-Nr. 33
unitEinheit -
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represent the 100 % reference value for the duty point in the current control function.Dieses Signal ist das Grundsignal. Dieses Signal liefert den 100 % Bezugswert für den Sollwert in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped;

6.2.0.34 duty point (rel.) active

propertyEigenschaft valueWert
instance #Instanz-Nr. 34
unitEinheit %
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device. Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.35 Bus Command Timer Time remain. out

propertyEigenschaft valueWert
instance #Instanz-Nr. 35
unitEinheit s
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This value represents the remaining time until the bus command timer elapses.Dieses Signal ist das Grundsignal. Dieser Wert setzt die stellt die noch verbleibende Timeout-Zeit für den Bus Command Timer dar.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.0.36 Flow (calculated) limit. min active

propertyEigenschaft valueWert
instance #Instanz-Nr. 36
unitEinheit m³/h
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This defines the minimum limit of the following signal. This signal represents the (calculated) flow. Calculated values are not suitable for closed loop control applications due to restricted availibility and precision over the range of operation.Dies definiert den Minimalgrenze des folgenden Signals. Dieses Signal repräsentiert den (berechneten) Durchfluss. Bei berechneten Werten sollte dieser Wert nicht für geschlossene Regelkreise verwendet werden, da die Genauigkeit und Verfügbarkeit nicht in allen Betriebspunkten gewährleistet werden kann.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.0.37 Flow (calculated) limit. max active

propertyEigenschaft valueWert
instance #Instanz-Nr. 37
unitEinheit m³/h
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This defines the maximum limit of the following signal. This signal represents the (calculated) flow. Calculated values are not suitable for closed loop control applications due to restricted availibility and precision over the range of operation.Dies definiert den Maximalgrenze des folgenden Signals. Dieses Signal repräsentiert den (berechneten) Durchfluss. Bei berechneten Werten sollte dieser Wert nicht für geschlossene Regelkreise verwendet werden, da die Genauigkeit und Verfügbarkeit nicht in allen Betriebspunkten gewährleistet werden kann.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.0.38 Flow (calculated) limit. off active

propertyEigenschaft valueWert
instance #Instanz-Nr. 38
unitEinheit m³/h
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This incorporates the 'off' limit for the signal This signal represents the (calculated) flow. Calculated values are not suitable for closed loop control applications due to restricted availibility and precision over the range of operation.Dies beinhaltet die untere Abschaltgrenze des Signals Dieses Signal repräsentiert den (berechneten) Durchfluss. Bei berechneten Werten sollte dieser Wert nicht für geschlossene Regelkreise verwendet werden, da die Genauigkeit und Verfügbarkeit nicht in allen Betriebspunkten gewährleistet werden kann.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.0.39 Flow nominal for Ctrl. Fun. active

propertyEigenschaft valueWert
instance #Instanz-Nr. 39
unitEinheit m³/h
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the nominal flow where the setpoint of a flow variable control function refers to.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den Nenn-Durchflusses, auf den sich der Sollwert für eine volumenstromabhängige Regelungsfunktion bezieht.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.40 Flow zero setpoint red. factor active

propertyEigenschaft valueWert
instance #Instanz-Nr. 40
unitEinheit %
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the setpoint reduction factor for flow dependent control funtions at zero flow.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den Sollwert-Reduktionsfaktor für durchflussabhängige Regelungsfunktionen bei Null-Durchfluß

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.48 Analog In 3 Measured Val. out

propertyEigenschaft valueWert
instance #Instanz-Nr. 48
unitEinheit -
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module BACnet MS/TP (5.00…99.99), CIF-Module Ethernet Multiprotocol (5.00…99.99), CIF-Module Ethernet Multiprotocol (3.03…99.99)

This is the base signal. This signal represents the measured value of the analog input #3.Dieses Signal ist das Grundsignal. Dieses Signal liefert den Messwert des Analogeingangs # 3.

Support referenceWird unterstützt durch:

Stratos GIGA 2.0;

6.2.0.49 Analog In 4 Measured Val. out

propertyEigenschaft valueWert
instance #Instanz-Nr. 49
unitEinheit -
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module BACnet MS/TP (5.00…99.99), CIF-Module Ethernet Multiprotocol (5.00…99.99), CIF-Module Ethernet Multiprotocol (3.03…99.99)

This is the base signal. This signal represents the measured value of the analog input #4.Dieses Signal ist das Grundsignal. Dieses Signal liefert den Messwert des Analogeingangs # 4.

Support referenceWird unterstützt durch:

Stratos GIGA 2.0;

6.2.0.90 Debug ID Out out

propertyEigenschaft valueWert
instance #Instanz-Nr. 90
unitEinheit -
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the ID of a value for software debugging. This signal shall never be used in productive environments.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert die ID eines Wertes zur Fehlersuche. Dieses Signal darf nicht in Produktivumgebungen benutzt werden

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.0.91 Debug Value out

propertyEigenschaft valueWert
instance #Instanz-Nr. 91
unitEinheit -
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents a value for software debugging. This signal shall never be used in productive environments.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert einen Wert zur Fehlersuche. Dieses Signal darf nicht in Produktivumgebungen benutzt werden

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.0.1031 duty point (rel.) min.-outp. A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1031
unitEinheit %
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.1032 duty point (rel.) max.-outp. A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1032
unitEinheit %
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.1033 duty point 100 % value A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1033
unitEinheit -
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represent the 100 % reference value for the duty point in the current control function.Dieses Signal ist das Grundsignal. Dieses Signal liefert den 100 % Bezugswert für den Sollwert in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped;

6.2.0.1034 duty point (rel.) B

propertyEigenschaft valueWert
instance #Instanz-Nr. 1034
unitEinheit %
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.1131 duty point (rel.) preset min.-outp. A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1131
unitEinheit %
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This incorporates a preset or fallback function for the following signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dies beinhaltet eine Voreinstellung für das folgende Signal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.1132 duty point (rel.) preset max.-outp. A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1132
unitEinheit %
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This incorporates a preset or fallback function for the following signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dies beinhaltet eine Voreinstellung für das folgende Signal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.1133 duty point 100 % value preset A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1133
unitEinheit -
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This incorporates a preset or fallback function for the following signal. This signal represent the 100 % reference value for the duty point in the current control function.Dies beinhaltet eine Voreinstellung für das folgende Signal. Dieses Signal liefert den 100 % Bezugswert für den Sollwert in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped;

6.2.0.1231 duty point (rel.) aux. min.-outp. A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1231
unitEinheit %
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This defines an alternative value for the following signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dies definiert einen alternativen Wert für das folgende Signal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.1232 duty point (rel.) aux. max.-outp. A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1232
unitEinheit %
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This defines an alternative value for the following signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dies definiert einen alternativen Wert für das folgende Signal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.1233 duty point 100 % value aux. A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1233
unitEinheit -
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This defines an alternative value for the following signal. This signal represent the 100 % reference value for the duty point in the current control function.Dies definiert einen alternativen Wert für das folgende Signal. Dieses Signal liefert den 100 % Bezugswert für den Sollwert in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped;

6.2.0.2009 temperature reference T1 B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2009
unitEinheit °C
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the first fluid reference temperature (T1) of the hydronic circuit for control purposes.Dieses Signal ist das Grundsignal. Dieses Signal liefert die erste Bezugstemperatur (T1) des hydraulischen Kreises für Regelungszwecke.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.2010 temperature reference T2 B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2010
unitEinheit °C
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the second fluid reference temperature (T2) of the hydronic circuit for control purposes.Dieses Signal ist das Grundsignal. Dieses Signal liefert die zweite Bezugstemperatur (T2) des hydraulischen Kreises für Regelungszwecke.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.0.2031 duty point (rel.) min.-outp. B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2031
unitEinheit %
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.2032 duty point (rel.) max.-outp. B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2032
unitEinheit %
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.0.2033 duty point 100 % value B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2033
unitEinheit -
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This is the base signal. This signal represent the 100 % reference value for the duty point in the current control function.Dieses Signal ist das Grundsignal. Dieses Signal liefert den 100 % Bezugswert für den Sollwert in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped;

6.2.0.3015 Flow replacement value active

propertyEigenschaft valueWert
instance #Instanz-Nr. 3015
unitEinheit m³/h
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the accumulated flow replacement value for all pumps of a pump combination, which permanently cannot provide a flow information.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den kummulierten Durchfluss-Ersatzwert für die Pumpen, welche in einem Pumpenverbund permanent keine Durchflußinformation bereitstellen können.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.1 Analog Outputs (AO)Analoge Ausgänge (AO)

instanceInstanz nameName
0 Bus Setpoint in
1 TEMP_VARIABLE Tmin in,active
2 TEMP_VARIABLE Tmax in,active
3 TEMP_VARIABLE Pmin in,active
4 TEMP_VARIABLE Pmax in,active
5 CONST_CONTROL Kp in,active
6 CONST_CONTROL Ti in,active
7 CONST_CONTROL Td in,active
8 Bus Command Timer Timeout in,active
8 Bus Command Timer Timeout in
8 Bus Command Timer Timeout active
9 temperature reference T1 in
10 temperature reference T2 in
11 sensor signal in
36 Flow (calculated) limit. min in
37 Flow (calculated) limit. max in
38 Flow (calculated) limit. off in
39 Flow nominal for Ctrl. Fun. in
40 Flow zero setpoint red. factor in
90 Debug ID In in
100 duty point (rel.) preset in,A
200 duty point (rel.) aux. in
3012 Flow replacement value in

6.2.1.0 Bus Setpoint in

propertyEigenschaft valueWert
instance #Instanz-Nr. 0
unitEinheit %
relinquish defaultRelinquish Default 100
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.1.1 TEMP_VARIABLE Tmin in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 1
unitEinheit °C
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This Parameter sets the lower temperature limit for temperature dependent pressure control. Below this temperature, the head is always constant Since this value must always be at least 10 K smaller than Tmax, the value Tmax is always set to 10 K higher than this value with every write access.Dieses Signal ist das Grundsignal. Dieser Parameter setzt die untere Grenztemperatur für die temperaturabhängige Druckregelung. Unterhalb dieser Temperatur bleibt der Diffenzdruck konstant. Weil dieser Wert immer um mindestens 10 K niedriger sein muss als der Wert für Tmax, wird bei einem Schreibzugriff Tmax immer automatisch mit angepasst.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal; Stratos;

6.2.1.2 TEMP_VARIABLE Tmax in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 2
unitEinheit °C
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This Parameter sets the upper limit for temperature dependent pressure head control. The head above this temperature is constant. Since this value must always be at least 10 K higher than Tmin, the value Tmin is always set to at least 10 K lower than this value.Dieses Signal ist das Grundsignal. Dieser Parameter setzt die obere Grenztemperatur für die temperaturabhängige Druckregelung. Über dieser Temperatur bleibt der Diffenzdruck konstant. Weil dieser Wert immer um mindestens 10 K höher sein muss als der Wert für Tmin, wird Tmin bei einem Schreibzugriff immer automatisch angepasst.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal; Stratos;

6.2.1.3 TEMP_VARIABLE Pmin in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 3
unitEinheit bar
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This parameter belongs to the operation mode Δp-c = f(T). It sets the presssure at and below the temperature Tmin. This value can be higheer or lower than the value of Tmax.Dieses Signal ist das Grundsignal. Dieser Parameter gehört zur Betriebsart Δp-c = f(T). Er setzt den Druck bei der Minimaltemperatur Tmin und darunter. Der Wert kann höher oder niedriger als der Wert von Δp(Tmax) sein.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal; Stratos;

6.2.1.4 TEMP_VARIABLE Pmax in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 4
unitEinheit bar
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This parameter belongs to the operation mode Δp-c = f(T). It sets the presssure at and above the temperature Tmax. This value can be higher or lower than the value of Δp(Tmin).Dieses Signal ist das Grundsignal. Dieser Parameter gehört zur Betriebsart Δp-c = f(T). Er setzt den Druck bei der oberen Grenz-Temperatur Tmax und darüber. Der Wert kann höher oder niedriger als der Wert von Δp(Tmax) sein.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal; Stratos;

6.2.1.5 CONST_CONTROL Kp in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 5
unitEinheit -
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. The parameter Kp controls the gain of the PID closed loop controller.Dieses Signal ist das Grundsignal. Der Parameter Kp stellt den Verstärkungsfaktor des PID-Reglers der aktuellen Regelungsart dar.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; IL_E, …; MVIE, …;

6.2.1.6 CONST_CONTROL Ti in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 6
unitEinheit s
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. The parameter Ti represent the integral time for the PID closed loop controller.Dieses Signal ist das Grundsignal. Der Parameter Ti stellt die Integrationszeit des PID-Reglers dar.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; IL_E, …; MVIE, …;

6.2.1.7 CONST_CONTROL Td in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 7
unitEinheit s
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. The Td parameter represents the derivative time for the PID closed loop controller.Dieses Signal ist das Grundsignal. Der Parameter Td stellt die Vorhaltzeit des PID-Reglers dar.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; IL_E, …; MVIE, …;

6.2.1.8 Bus Command Timer Timeout in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 8
unitEinheit s
relinquish defaultRelinquish Default 300
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module BACnet MS/TP (1.00…5.99)

This is the base signal. This value sets the timeout for the Bus Command Timer. Minimum value is 20 s; factory default is 300 s.Dieses Signal ist das Grundsignal. Dieser Wert setzt die Timeout-Zeit für den Bus Command Timer. Diese Funktion ist bei IF-Modulen Modbus und BACnet erst ab Software SW > 2.00 vorhanden. Ist dieser Datenpunkt nicht vorhanden, gilt eine fest eingestellte Zeit von 300 s. Der Minimalwert ist 20 s.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.1.8 Bus Command Timer Timeout in

propertyEigenschaft valueWert
instance #Instanz-Nr. 8
unitEinheit s
relinquish defaultRelinquish Default 300
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99)

This is the base signal. This value sets the timeout for the Bus Command Timer. Minimum value is 20 s; factory default is 300 s.Dieses Signal ist das Grundsignal. Dieser Wert setzt die Timeout-Zeit für den Bus Command Timer. Diese Funktion ist bei IF-Modulen Modbus und BACnet erst ab Software SW > 2.00 vorhanden. Ist dieser Datenpunkt nicht vorhanden, gilt eine fest eingestellte Zeit von 300 s. Der Minimalwert ist 20 s.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.1.8 Bus Command Timer Timeout active

propertyEigenschaft valueWert
instance #Instanz-Nr. 8
propertyProperty 104
unitEinheit s
relinquish defaultRelinquish Default 300
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99)

This is the base signal. This value sets the timeout for the Bus Command Timer. Minimum value is 20 s; factory default is 300 s.Dieses Signal ist das Grundsignal. Dieser Wert setzt die Timeout-Zeit für den Bus Command Timer. Diese Funktion ist bei IF-Modulen Modbus und BACnet erst ab Software SW > 2.00 vorhanden. Ist dieser Datenpunkt nicht vorhanden, gilt eine fest eingestellte Zeit von 300 s. Der Minimalwert ist 20 s.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.1.9 temperature reference T1 in

propertyEigenschaft valueWert
instance #Instanz-Nr. 9
unitEinheit °C
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represents the first fluid reference temperature (T1) of the hydronic circuit for control purposes.Dieses Signal ist das Grundsignal. Dieses Signal liefert die erste Bezugstemperatur (T1) des hydraulischen Kreises für Regelungszwecke.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.1.10 temperature reference T2 in

propertyEigenschaft valueWert
instance #Instanz-Nr. 10
unitEinheit °C
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal represents the second fluid reference temperature (T2) of the hydronic circuit for control purposes.Dieses Signal ist das Grundsignal. Dieses Signal liefert die zweite Bezugstemperatur (T2) des hydraulischen Kreises für Regelungszwecke.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.1.11 sensor signal in

propertyEigenschaft valueWert
instance #Instanz-Nr. 11
unitEinheit -
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal defines a sensor value for closed loop control applications. Scaling and physical unit are corresponding to the current control functionDieses Signal ist das Grundsignal. Dieses Signal definiert einen Sensorwert für Regelungszwecke. Skalierung und Einheit entsprechen der aktuellen Regelungsfunktion.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.1.36 Flow (calculated) limit. min in

propertyEigenschaft valueWert
instance #Instanz-Nr. 36
unitEinheit m³/h
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This defines the minimum limit of the following signal. This signal represents the (calculated) flow. Calculated values are not suitable for closed loop control applications due to restricted availibility and precision over the range of operation.Dies definiert den Minimalgrenze des folgenden Signals. Dieses Signal repräsentiert den (berechneten) Durchfluss. Bei berechneten Werten sollte dieser Wert nicht für geschlossene Regelkreise verwendet werden, da die Genauigkeit und Verfügbarkeit nicht in allen Betriebspunkten gewährleistet werden kann.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.1.37 Flow (calculated) limit. max in

propertyEigenschaft valueWert
instance #Instanz-Nr. 37
unitEinheit m³/h
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This defines the maximum limit of the following signal. This signal represents the (calculated) flow. Calculated values are not suitable for closed loop control applications due to restricted availibility and precision over the range of operation.Dies definiert den Maximalgrenze des folgenden Signals. Dieses Signal repräsentiert den (berechneten) Durchfluss. Bei berechneten Werten sollte dieser Wert nicht für geschlossene Regelkreise verwendet werden, da die Genauigkeit und Verfügbarkeit nicht in allen Betriebspunkten gewährleistet werden kann.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.1.38 Flow (calculated) limit. off in

propertyEigenschaft valueWert
instance #Instanz-Nr. 38
unitEinheit m³/h
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This incorporates the 'off' limit for the signal This signal represents the (calculated) flow. Calculated values are not suitable for closed loop control applications due to restricted availibility and precision over the range of operation.Dies beinhaltet die untere Abschaltgrenze des Signals Dieses Signal repräsentiert den (berechneten) Durchfluss. Bei berechneten Werten sollte dieser Wert nicht für geschlossene Regelkreise verwendet werden, da die Genauigkeit und Verfügbarkeit nicht in allen Betriebspunkten gewährleistet werden kann.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;

6.2.1.39 Flow nominal for Ctrl. Fun. in

propertyEigenschaft valueWert
instance #Instanz-Nr. 39
unitEinheit m³/h
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the nominal flow where the setpoint of a flow variable control function refers to.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den Nenn-Durchflusses, auf den sich der Sollwert für eine volumenstromabhängige Regelungsfunktion bezieht.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.1.40 Flow zero setpoint red. factor in

propertyEigenschaft valueWert
instance #Instanz-Nr. 40
unitEinheit %
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the setpoint reduction factor for flow dependent control funtions at zero flow.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den Sollwert-Reduktionsfaktor für durchflussabhängige Regelungsfunktionen bei Null-Durchfluß

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.1.90 Debug ID In in

propertyEigenschaft valueWert
instance #Instanz-Nr. 90
unitEinheit -
relinquish defaultRelinquish Default 0
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the ID of a value for software debugging. This signal shall never be used in productive environments.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert die ID eines Wertes zur Fehlersuche. Dieses Signal darf nicht in Produktivumgebungen benutzt werden

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.1.100 duty point (rel.) preset in,A

propertyEigenschaft valueWert
instance #Instanz-Nr. 100
unitEinheit %
relinquish defaultRelinquish Default 100
functionFunktion input value / readback input value (A)Eingangswert / Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This incorporates a preset or fallback function for the following signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dies beinhaltet eine Voreinstellung für das folgende Signal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.1.200 duty point (rel.) aux. in

propertyEigenschaft valueWert
instance #Instanz-Nr. 200
unitEinheit %
relinquish defaultRelinquish Default 100
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This defines an alternative value for the following signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dies definiert einen alternativen Wert für das folgende Signal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.1.3012 Flow replacement value in

propertyEigenschaft valueWert
instance #Instanz-Nr. 3012
unitEinheit m³/h
relinquish defaultRelinquish Default 3.40282e+38
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the accumulated flow replacement value for all pumps of a pump combination, which permanently cannot provide a flow information.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den kummulierten Durchfluss-Ersatzwert für die Pumpen, welche in einem Pumpenverbund permanent keine Durchflußinformation bereitstellen können.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.3 Binary Inputs (BI)Binäre Eingänge (BI)

instanceInstanz nameName
0 System Command Pump on active
1 System Command off override active
2 System Command max override active
3 System Command min override active
4 Status Lower Regulation Limit out
5 Status Upper Regulation Limit out
6 Status Setpoint out of Range out
7 Status Setpoint Diff. > 10 % out
8 Auto Night Mode out
9 Status Ready for Operation out
10 Status Pump is operating out
11 Status Service required out
12 Status Warning Present out
13 Status Error Present out
14 Status Final Error Present out
15 Status Local Operation Active out
16 Status External Setpoint Active out
17 Override on active
18 actuation limit out
19 Auto Night Mode active
2000 Pump on B

6.2.3.0 System Command Pump on active

propertyEigenschaft valueWert
instance #Instanz-Nr. 0
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the normal "ON" command. This signal is effektive, if no override functions are active.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den normalen Einschaltbefehl. Er wird umgesetzt, wenn keine Übersteuerungsfunktionen aktiv sind.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.1 System Command off override active

propertyEigenschaft valueWert
instance #Instanz-Nr. 1
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal overrides the pump (system) command with "OFF" command.Dieses Signal ist das Grundsignal. Dieses Signal übersteuert den Einschaltbefehl für die Pumpe (oder das Pumpensystem) mit einem "OFF" Befehl.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.2 System Command max override active

propertyEigenschaft valueWert
instance #Instanz-Nr. 2
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal overrides the pump (system) command with "MAX" command.Dieses Signal ist das Grundsignal. Dieses Signal übersteuert den Einschaltbefehl für die Pumpe (oder das Pumpensystem) mit einem "MAX" Befehl.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.3 System Command min override active

propertyEigenschaft valueWert
instance #Instanz-Nr. 3
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal overrides the pump (system) command with "MIN" command.Dieses Signal ist das Grundsignal. Dieses Signal übersteuert den Einschaltbefehl für die Pumpe (oder das Pumpensystem) mit einem "MIN" Befehl.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.4 Status Lower Regulation Limit out

propertyEigenschaft valueWert
instance #Instanz-Nr. 4
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows that the control output for the pump speed is at it´s low limit. The pump (system) cannot follow the control signal in this direction.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass sich der Drehzahl-Stellausgang zur Pumpe an der unteren Gerenze befindet. Die Pumpe / das Pumpensystem kann dem Stellsignal in diese Richtung nicht mehr folgen.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.5 Status Upper Regulation Limit out

propertyEigenschaft valueWert
instance #Instanz-Nr. 5
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows that the control output for the pump speed is as it´s high limit. The pump (system) cannot follow the control signal in this direction.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass sich der Drehzahl-Stellausgang zur Pumpe an der oberen Gerenze befindet. Die Pumpe / das Pumpensystem kann dem Stellsignal in diese Richtung nicht mehr folgen.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.6 Status Setpoint out of Range out

propertyEigenschaft valueWert
instance #Instanz-Nr. 6
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows that the setpoint is out of the possible range. The pump (system) will not perform according the setpoint.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass sich der eingestellte Sollwert außerhalb des möglichen Bereichs befindet. Die Pumpe wird den gewünschten Sollwert nicht erreichen.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.3.7 Status Setpoint Diff. > 10 % out

propertyEigenschaft valueWert
instance #Instanz-Nr. 7
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows that the setpoint is not reached. Possible causes are an insufficient pump size or a setpoint which is lower than the minimal setpoint.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass der eingestellte Sollwert nicht erreicht wurde. Ursachen können eine zu geringe ausgewählte Pumpenleistung bzw. eine zu geringe Sollwerteinstellung sein.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.3.8 Auto Night Mode out

propertyEigenschaft valueWert
instance #Instanz-Nr. 8
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the automatic setback mode . This mode forces the device to run at lower settings than the normal duty point.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert die automatische Absenkfuntion. Diese zwingt das Gerät, nicht mehr mit der Sollwertvorgabe, sondern mit niedrigeren Werten zu arbeiten.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos;

6.2.3.9 Status Ready for Operation out

propertyEigenschaft valueWert
instance #Instanz-Nr. 9
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal indicates that the motor of the pump is capable to run in case of a valid "on" command.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass der Motor der Pumpe sich drehen könnte, wenn ein Einschaltbefehl käme.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.10 Status Pump is operating out

propertyEigenschaft valueWert
instance #Instanz-Nr. 10
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the normal "ON" command. This signal is effektive, if no override functions are active.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den normalen Einschaltbefehl. Er wird umgesetzt, wenn keine Übersteuerungsfunktionen aktiv sind.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.11 Status Service required out

propertyEigenschaft valueWert
instance #Instanz-Nr. 11
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows a required service action for the device. It does not mean any current insufficency for the operation.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass eine Service-Aktion erforderlich ist. Dieses Signal bedeutet keine akute Funktionseinschränkung.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.3.12 Status Warning Present out

propertyEigenschaft valueWert
instance #Instanz-Nr. 12
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows a warning regarding a possible insufficency or switch off. It does not mean an effective insuffency for the operation.Dieses Signal ist das Grundsignal. Dieses Signal warnt vor einer möglichen bevorstehenden Funktionseinschränking oder Abschaltung Dieses Signal bedeutet noch keine akute Funktionseinschränkung.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.3.13 Status Error Present out

propertyEigenschaft valueWert
instance #Instanz-Nr. 13
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows an error of the pump. It means that the motor is currently stopped. A start retry will be performed.Dieses Signal ist das Grundsignal. Dieses Signal zeigt einen Fehler der Pumpe an und bedeutet, dass der Motor nicht dreht. Ein automatischer Wiederanlaufversuch wird erfolgen.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.3.14 Status Final Error Present out

propertyEigenschaft valueWert
instance #Instanz-Nr. 14
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows a final error of the pump. It means that the motor is currently stopped. A start retry will not be performed.Dieses Signal ist das Grundsignal. Dieses Signal zeigt einen endgültigen Fehler der Pumpe an und bedeutet, dass der Motor nicht dreht. Ein automatischer Wiederanlaufversuch wird nicht erfolgen.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.3.15 Status Local Operation Active out

propertyEigenschaft valueWert
instance #Instanz-Nr. 15
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows that the control via this communication channel is overidden by a local action at the device.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass die Steuerung über diesen Kanal durch eine lokale Aktion am Gerät derzeit blockiert ist.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.16 Status External Setpoint Active out

propertyEigenschaft valueWert
instance #Instanz-Nr. 16
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal shows that the setpoint is not provided by this communication channel.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass der Sollwert nicht über diesen Kommunikationskanal vorgegeben wird

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.3.17 Override on active

propertyEigenschaft valueWert
instance #Instanz-Nr. 17
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal overrides the pump (system) command with "ON" command.Dieses Signal ist das Grundsignal. Dieses Signal übersteuert den Einschaltbefehl für die Pumpe (oder das Pumpensystem) mit einem "ON" Befehl.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal; Stratos; IL_E, …; MVIE, …;

6.2.3.18 actuation limit out

propertyEigenschaft valueWert
instance #Instanz-Nr. 18
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal shows that the control output for the pump speed is at one of the limits. The pump (system) cannot follow further changes of the control signal in this direction.Dieses Signal ist das Grundsignal. Dieses Signal zeigt an, dass sich der Drehzahl-Stellausgang zur Pumpe an einer Grenze befindet. Die Pumpe / das Pumpensystem kann einer weiteren Änderung in diese Richtung nicht mehr folgen.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped;

6.2.3.19 Auto Night Mode active

propertyEigenschaft valueWert
instance #Instanz-Nr. 19
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the automatic setback mode . This mode forces the device to run at lower settings than the normal duty point.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert die automatische Absenkfuntion. Diese zwingt das Gerät, nicht mehr mit der Sollwertvorgabe, sondern mit niedrigeren Werten zu arbeiten.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos;

6.2.3.2000 Pump on B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2000
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This is the base signal. This signal represents the normal "ON" command. This signal is effektive, if no override functions are active.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den normalen Einschaltbefehl. Er wird umgesetzt, wenn keine Übersteuerungsfunktionen aktiv sind.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.4 Binary Outputs (BO)Binäre Ausgänge (BO)

instanceInstanz nameName
0 Bus Command Pump on in
1 Bus Command off override in
2 Bus Command max override in
3 Bus Command min override in
8 Auto Night Mode in
17 Override on in
100 Preset Command Pump on preset in,A
200 Pump on aux. in

6.2.4.0 Bus Command Pump on in

propertyEigenschaft valueWert
instance #Instanz-Nr. 0
relinquish defaultRelinquish Default 0
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal represents the normal "ON" command. This signal is effektive, if no override functions are active.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert den normalen Einschaltbefehl. Er wird umgesetzt, wenn keine Übersteuerungsfunktionen aktiv sind.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.4.1 Bus Command off override in

propertyEigenschaft valueWert
instance #Instanz-Nr. 1
relinquish defaultRelinquish Default 0
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal overrides the pump (system) command with "OFF" command.Dieses Signal ist das Grundsignal. Dieses Signal übersteuert den Einschaltbefehl für die Pumpe (oder das Pumpensystem) mit einem "OFF" Befehl.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.4.2 Bus Command max override in

propertyEigenschaft valueWert
instance #Instanz-Nr. 2
relinquish defaultRelinquish Default 0
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal overrides the pump (system) command with "MAX" command.Dieses Signal ist das Grundsignal. Dieses Signal übersteuert den Einschaltbefehl für die Pumpe (oder das Pumpensystem) mit einem "MAX" Befehl.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.4.3 Bus Command min override in

propertyEigenschaft valueWert
instance #Instanz-Nr. 3
relinquish defaultRelinquish Default 0
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This is the base signal. This signal overrides the pump (system) command with "MIN" command.Dieses Signal ist das Grundsignal. Dieses Signal übersteuert den Einschaltbefehl für die Pumpe (oder das Pumpensystem) mit einem "MIN" Befehl.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.4.8 Auto Night Mode in

propertyEigenschaft valueWert
instance #Instanz-Nr. 8
relinquish defaultRelinquish Default 0
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)

This is the base signal. This signal represents the automatic setback mode . This mode forces the device to run at lower settings than the normal duty point.Dieses Signal ist das Grundsignal. Dieses Signal repräsentiert die automatische Absenkfuntion. Diese zwingt das Gerät, nicht mehr mit der Sollwertvorgabe, sondern mit niedrigeren Werten zu arbeiten.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos;

6.2.4.17 Override on in

propertyEigenschaft valueWert
instance #Instanz-Nr. 17
relinquish defaultRelinquish Default 0
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)

This is the base signal. This signal overrides the pump (system) command with "ON" command.Dieses Signal ist das Grundsignal. Dieses Signal übersteuert den Einschaltbefehl für die Pumpe (oder das Pumpensystem) mit einem "ON" Befehl.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal; Stratos; IL_E, …; MVIE, …;

6.2.4.100 Preset Command Pump on preset in,A

propertyEigenschaft valueWert
instance #Instanz-Nr. 100
relinquish defaultRelinquish Default 1
functionFunktion input value / readback input value (A)Eingangswert / Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)

This incorporates a preset or fallback function for the following signal. This signal represents the normal "ON" command. This signal is effektive, if no override functions are active.Dies beinhaltet eine Voreinstellung für das folgende Signal. Dieses Signal repräsentiert den normalen Einschaltbefehl. Er wird umgesetzt, wenn keine Übersteuerungsfunktionen aktiv sind.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.4.200 Pump on aux. in

propertyEigenschaft valueWert
instance #Instanz-Nr. 200
relinquish defaultRelinquish Default 0
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)

This defines an alternative value for the following signal. This signal represents the normal "ON" command. This signal is effektive, if no override functions are active.Dies definiert einen alternativen Wert für das folgende Signal. Dieses Signal repräsentiert den normalen Einschaltbefehl. Er wird umgesetzt, wenn keine Übersteuerungsfunktionen aktiv sind.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.13 Mutistate Inputs (MI)Multistate Eingänge (MI)

instanceInstanz nameName
0 System Control Mode active
1 Current Warning/Error Message out
2 System Command Timer active
3 Setpoint Signal Source active
4 User Trouble Code out
18 Analog In 1 Measured Val. units out
19 Analog In 2 Measured Val. units out
33 duty point (rel.) units active
48 Analog In 3 Measured Val. units out
49 Analog In 4 Measured Val. units out
1003 Setpoint Signal Source B
1033 duty point (rel.) units A
1133 duty point (rel.) preset units A
1233 duty point (rel.) aux. units A
2000 Control Function B
2033 duty point (rel.) units B
2034 parameter set selector B

6.2.13.0 System Control Mode active

propertyEigenschaft valueWert
instance #Instanz-Nr. 0
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 Gen_Spd This control mode operates the device with constant speed.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
2 CONST_FREQ reservedreserviert
3 CONST_POWER reservedreserviert
4 CONST_HEAD reservedreserviert
5 Gen_PConst This control mode operates the device with constant discharge pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Ausgangsdruck. MVIE, …;
6 Gen_PHdConst This control mode operates the device with constant differential pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
7 Gen_PHdVar This control mode operates the device with a differential pressure which varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
8 CONST_FLOW reservedreserviert
9 Gen_T This control mode operates the device with constant temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
10 Gen_TDiff This control mode operates the device with constant differential temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
11 CONST_LEV reservedreserviert
12 TEMP_VARIABLE This control mode operates the device with a differential pressure which varies with the fluid temperature.Diese Steuerungsart betreibt das Gerät mit mediumstemperaturabhängigem Differenzdruck (Δp-c=F(T)) . CIF-/IF-Module internal; Stratos;
13 Gen_UsrDfd This control mode operates the device with user configurable PID controller.Diese Steuerungsart betreibt das Gerät mit einem frei konfigurierbaren PID-Regler für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; IL_E, …; MVIE, …;
14 Gen_PVar This control mode operates the device with a discharge pressure that varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigen Ausgangsdruck. MVIE, …;
15 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;
16 HeatRadiator_PHd This control mode operates the device with a differential pressure which varies with the flow for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
17 HeatRadiator_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
18 HeatRadiator_T This control mode operates the device with constant temperature for heating radiator application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
19 HeatFloor_PHd This control mode operates the device with a differential pressure for floor heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
20 HeatFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
21 HeatFloor_T This control mode operates the device with constant temperature for floor heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
22 HeatCeiling_PHd This control mode operates the device with constant differential pressure for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
23 HeatCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
24 HeatCeiling_T This control mode operates the device with constant temperature for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
25 HeatFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
26 HeatFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
27 HeatFan_T This control mode operates the device with constant temperature for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
28 HeatB._T This control mode operates the device with constant temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
29 HeatB._TDiff This control mode operates the device with constant differential temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
30 HeatB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
31 HeatE._T This control mode operates the device with constant temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
32 HeatE._TDiff This control mode operates the device with constant differential temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
33 HeatE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
34 Heat_PHdConst This control mode operates the device with constant differential pressure for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
35 Heat_PHdVar This control mode operates the device with a differential pressure which varies with the flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
36 Heat_PHdExt This control mode operates the device with constant differential pressure for heating applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
37 Heat_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
38 Heat_VolFlow This control mode operates the device with constant volume flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
39 Heat_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
40 Heat_T This control mode operates the device with constant temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
41 Heat_TDiff This control mode operates the device with constant differential temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
42 Heat_Spd This control mode operates the device with constant speed for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
43 CoolCeiling_PHd This control mode operates the device with constant differential pressure for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
44 CoolCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
45 CoolCeiling_T This control mode operates the device with constant temperature for ceiling refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
46 CoolFloor_PHd This control mode operates the device with constant differential pressure for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
47 CoolFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
48 CoolFloor_T This control mode operates the device with constant temperature mode for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
49 CoolFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstronmabhängigem Differenzdruck für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
50 CoolFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
51 CoolFan_T This control mode operates the device with constant temperature mode for fan coil refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
52 CoolB._T This control mode operates the device with constant temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
53 CoolB._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
54 CoolB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
55 CoolE._T This control mode operates the device with constant temperature mode for refrigeration application with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungs-Anwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
56 CoolE._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
57 CoolE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with heat exhanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Wärmetauscher Stratos MAXO; Stratos GIGA 2.0;
58 Cool_PHdConst This control mode operates the device with constant differential pressure for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
59 Cool_PHdVar This control mode operates the device with a differential pressure which varies with the flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
60 Cool_PHdExt This control mode operates the device with constant differential pressure for refrigeration application with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
61 Cool_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
62 Cool_VolFlow This control mode operates the device with constant volume flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
63 Cool_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen Stratos MAXO; Stratos GIGA 2.0;
64 Cool_T This control mode operates the device with constant temperature mode for refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
65 Cool_TDiff This control mode operates the device with constant differential temperature for cooling application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
66 Cool_Spd This control mode operates the motor with constant speed for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
67 San_Circ._T This control mode operates the device with constant temperature for sanitary hot water circulation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Zirkulations-Anwendungen. Stratos MAXO;
68 SanW.Heat._TDiff This control mode operates the device with constant differential temperature for sanitary hot water application with heat exchanger in the storage tank.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen mit Wärmetauscher im Warmwasserspeicher Stratos MAXO; Stratos GIGA 2.0;
69 SanL.S._T reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
70 SanL.S._Acc.Flow reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
71 San_PHdConst This control mode operates the device with constant differential pressure for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
72 San_PHdVar This control mode operates the device with a differential pressure which varies with the flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
73 San_PHdExternal This control mode operates the device with constant differential pressure for sanitary hot water applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
74 San_VolFlow This control mode operates the device with constant volume flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
75 San_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Trink-Warmwasser-Anwendungen Stratos MAXO; Stratos GIGA 2.0;
76 San_T This control mode operates the device with constant temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
77 San_TDiff This control mode operates the device with constant differential temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
78 San_Spd This control mode operates the motor with constant speed for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
79 Gen_PHdExt This control mode operates the device with constant differential pressure for generic applications with external diffential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
80 Gen_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for generic applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
81 Gen_VolFlow This control mode operates the device with constant volume flow for generic applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
82 Gen_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for generic applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
83 ScndPHdConst This control mode operates the device with constant differential pressure. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
84 ScndPHdVar This control mode operates the device with a differential pressure which varies with the flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
85 ScndFlow This control mode operates the device with constant volume flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
86 ScndSpd This control mode operates the motor with constant speed. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
87 HeatConcrete_PHd This control mode operates the device with a differential pressure for concrete core activation heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
88 HeatConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
89 HeatConcrete_TDiff This control mode operates the device with constant differential temperature for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
90 HeatConcrete_Flow This control mode operates the device with constant volume flow for heating applications with concrete core activation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
91 HeatBottle_Flow This control mode operates the device with constant volume flow for heating applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
92 HeatMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
93 HeatMan_Flow This control mode operates the device with constant volume flow for heating applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
94 HeatTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with storage tank.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
95 HeatTank_Flow This control mode operates the device with constant volume flow for heating applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
96 HeatExchanger_Flow This control mode operates the device with constant volume flow for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
97 HeatSource_TDiff This control mode operates the device with constant differential temperature for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
98 HeatSource_Flow This control mode operates the device with constant volume flow for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
99 HeatDistrict_PHdConst This control mode operates the device with a differential pressure for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
100 HeatDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
101 HeatDistrict_PHdExt This control mode operates the device with constant differential pressure for district heating application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernwärme-Anwendungen. Stratos GIGA 2.0;
102 CoolConcrete_PHd This control mode operates the device with a differential pressure for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
103 CoolConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
104 CoolConcrete_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
105 CoolConcrete_Flow This control mode operates the device with constant volume flow for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
106 CoolBottle_Flow This control mode operates the device with constant volume flow for refrigeration applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
107 CoolMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
108 CoolMan_Flow This control mode operates the device with constant volume flow for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
109 CoolTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
110 CoolTank_Flow This control mode operates the device with constant volume flow for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
111 CoolExchanger_Flow This control mode operates the device with constant volume flow for refrigeration applications with heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
112 CoolCondenser_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with recirculating cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
113 CoolCondensor_Flow This control mode operates the device with constant volume flow for refrigeration applications with recirculationg cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
114 CoolDistrict_PHdConst This control mode operates the device with a differential pressure for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
115 CoolDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
116 CoolDistrict_PHdExt This control mode operates the device with constant differential pressure for district refrigeration application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernkühlungs-Anwendungen. Stratos GIGA 2.0;
117 108_RESERVED reserved for future use reserviert
118 109_RESERVED reserved for future use reserviert

This is the base signal. This signal represents the control mode for the device. In case a selected mode is not supported, the device will stay in the previously selected mode.Dieses Signal ist das Grundsignal. Dieses Signal beinhaltet die Steuerungsart für das Gerät. Wird eine gewählte Steuerungsart nicht unterstützt, bleibt das Gerät bei der zuletzt eingestellten Steuerungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.13.1 Current Warning/Error Message out

propertyEigenschaft valueWert
instance #Instanz-Nr. 1
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 NO_ERROR No errorKein Fehler CIF-/IF-Module mapped; Stratos MAXO; Stratos; IL_E, …; MVIE, …;
2 FLUID_FLOW_HI Flow rate out of range, Q > 1,1 * Qnominalhydraulische Überlast, Q > 1,1 * Qnenn CIF-/IF-Module mapped; MVIE, …;
3 FLUID_TEMP_LO Fluid temperature < T minMediumtemperatur <T min CIF-/IF-Module mapped;
4 FLUID_TEMP_HI Fluid temperature > T maxMediumtemperatur >T max CIF-/IF-Module mapped; Stratos;
5 MAINS_VOLT_LO mains under-voltageNetz-Unterspannung (ggfs. .x als Zusatz für Ort) CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
6 MAINS_VOLT_HI mains overvoltageNetz-Überspannung CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
7 MAINS_PHASE Missing mains phase2-Phasenlauf Phasenfehler netzseitig CIF-/IF-Module mapped; IL_E, …; MVIE, …;
8 PUMP_GENERATOR Generator operationgeneratorischer Betrieb (Durchströmung in Förderrichtung) CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
9 PUMP_CAVITATION CavitationKavitation CIF-/IF-Module mapped;
10 PUMP_TURBINE Turbine modeTurbinenbetrieb (Durchströmung gegen Förderrichtung) CIF-/IF-Module mapped; Stratos;
11 PUMP_BLOCKED Blocked rotorBlockierung CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
12 PUMP_DRY_RUN Dry runningUnterlast CIF-/IF-Module mapped; Stratos; MVIE, …;
13 PUMP_ROUGH_IMP Rough running impellerÜberlast CIF-/IF-Module mapped;
14 PUMP_CLOGGED Clogged or unfastened impellerLaufrad verstopft oder gelöst CIF-/IF-Module mapped;
15 PUMP_LEAK_INT Internal motor leakage sensor trippedDI-Indikator ausgelöst CIF-/IF-Module mapped;
16 PUMP_VIBRATION Vibration over limitUnzulässige Vibration CIF-/IF-Module mapped;
17 PUMP_ROT_DIR Wrong rotation directionFalsche Drehrichtung CIF-/IF-Module mapped;
18 PUMP_LEAK_EXT Water leakageLeckage CIF-/IF-Module mapped;
19 PUMP_SEAL Mechanical seal defectGleitringdichtung defekt CIF-/IF-Module mapped;
20 FLUID_FLOW_LOW error volume flow pumpFehler Volumenstromüberwachung Pumpe CIF-/IF-Module mapped;
21 MOT_TEMP_HI Over temperature motor windingÜbertemperatur Wicklung CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
22 MOT_TORQUE_HI Overload motor (torque)Überlast Motor (Drehmomoment) CIF-/IF-Module mapped; Stratos; IL_E, …;
23 MOT_INSULATION Motor insulation faultIsolationsfehler CIF-/IF-Module mapped;
24 MOT_SHORT_CIRC Short circuit (phase - phase, phase - ground)Kurz-/Erdschluß CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
25 MOT_CURR_LO Current too lowWicklungswiderstand CIF-/IF-Module mapped;
26 MOT_OPEN_CIRC Missing motor/winding contactStrom zu gering CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
27 MOT_TEMP_SENS WSK or PTC cable breakWSK bzw. PTC unterbrochen CIF-/IF-Module mapped; IL_E, …; MVIE, …;
28 MOT_SPEED_SENS Speed sensor defectDrehzahl-/Lagesensor defekt CIF-/IF-Module mapped;
29 MOT_BEARING Bearing wear over limitUnzulässiger Lagerverschleiß CIF-/IF-Module mapped;
30 MOT_TEMP_WARN Pre alarm WSKWSK-Voralarm CIF-/IF-Module mapped;
31 MOD_TEMP_HI Over temperature moduleÜbertemperatur Modul CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
32 MOD_TEMP_COMP_HI Over temperature power bridge / componentsÜbertemperatur Hybrid/Leistungsteil CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
33 MOD_VOLT_DC_LO Undervoltage DC linkUnterspannung Zwischenkreis CIF-/IF-Module mapped; IL_E, …; MVIE, …;
34 MOD_VOLT_DC_HI Overvoltage DC linkÜberspannung Zwischenkreis CIF-/IF-Module mapped; IL_E, …; MVIE, …;
35 E034 Wrong combination pump - moduleZuordnung Modul / Pumpe falsch CIF-/IF-Module mapped;
36 E035 DP/MP: several same identityDP/MP: gleiche Identität mehrfach vorhanden CIF-/IF-Module mapped; IL_E, …;
37 MOD_RELAY Inrush current relay (Lader.) PFC defect (PFC) AD Converter (ADC) Synchronisation (Sync) Communication (Komm)Laderelais (Lader.) PFC defekt (PFC) AD Wandler (ADC) Synchronisation (Sync) Kommunikation (Komm) CIF-/IF-Module mapped; Stratos;
38 MOD_DC_LINK DC link capacitor defectZwischenkreiselko defekt CIF-/IF-Module mapped;
39 MOD_SENS_FLUID PTC fluid defectPTC für Medientemperatur defekt CIF-/IF-Module mapped; Stratos;
40 E039 -- CIF-/IF-Module mapped;
41 SENS_PRESS Ext. pressure sensor / switch defectext. Drucksensor / Druckschalter defekt (ggf. mit Zusatz .x für Ort) CIF-/IF-Module mapped;
42 SENS_ACC Ext. accelaration sensor defectext. Beschleunigungssensor defekt CIF-/IF-Module mapped;
43 SENS_IN1 Connection to signal source at IN1 open loop / short circuit (2…10V/4…20mA)Verbindung zum Quelle an IN1 unterbrochen oder kurzgeschlossen (2-10V/4-20mA) CIF-/IF-Module mapped; MVIE, …;
44 SENS_IN2 Connection to signal source at IN2 open loop / short circuit (2…10V/4…20mA)Verbindung zum Quelle an IN2 unterbrochen oder kurzgeschlossen (2-10V/4-20mA) CIF-/IF-Module mapped;
45 SENS_SPEED Ext. Revolution speed sensor defectext. Drehzahlsensor defekt CIF-/IF-Module mapped;
46 SENS_TEMP_1 Temperature sensor 1 defectTemperatursensor 1 defekt CIF-/IF-Module mapped;
47 SENS_TEMP_2 Temperature sensor 2 defectTemperatursensor 2 defekt CIF-/IF-Module mapped;
48 SENS_TEMP_3 Temperature sensor 3 defectTemperatursensor 3 defekt CIF-/IF-Module mapped;
49 SENS_FLOW flow sensor defect- CIF-/IF-Module mapped;
50 E049 Expansion vessel / check valveMembran-Ausgleichsbehälter / Rückschlagventil CIF-/IF-Module mapped;
51 COM_BMS BMS-communication timeoutBMS-Kommunikations Timeout CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
52 COM_DP Not permitted combination DP/MPunzulässige Kombination DP/MP CIF-/IF-Module mapped; Stratos; IL_E, …;
53 COM_DP_TIMEOUT DP/MP-communication timeoutDP/MP-Kommunikations Timeout CIF-/IF-Module mapped; Stratos; IL_E, …;
54 COM_CAN_ADR Double / multiple adress (for CAN bus communication)Doppelte/Mehrfache Adressvergabe CIF-/IF-Module mapped; Stratos;
55 COM_CAN_BIND Binding not possible, bus device missing Bindungspartner fehlt CIF-/IF-Module mapped; Stratos; MVIE, …;
56 COM_VFD Frequency converter - communication errorFrequenz-Umrichter-Kommunikationsfehler CIF-/IF-Module mapped;
57 E056 -- CIF-/IF-Module mapped;
58 E057 -- CIF-/IF-Module mapped;
59 E058 -- CIF-/IF-Module mapped;
60 E059 -- CIF-/IF-Module mapped;
61 SYS_PRESS_HI System over pressureÜberdruck System CIF-/IF-Module mapped;
62 SYS_PRESS_LO System low pressureUnterdruck System CIF-/IF-Module mapped;
63 SYS_FLUID_LO Lack of water (.x suffix for location)Wassermangel (WM) (ggf. Zusatz .x für Ort) CIF-/IF-Module mapped;
64 SYS_FLUID_LEAK leakage in system (loss of water)Leckage System (Wasserverlust) CIF-/IF-Module mapped;
65 SYS_FLUID_FROST Frost protectionFrostschutz CIF-/IF-Module mapped;
66 SYS_FLUID_DRAIN drainage failureWasser-Ablauf/Überlauf gestört CIF-/IF-Module mapped;
67 SYS_FLUID_FLOOD Flood (max. water level)Hochwasser (HW) CIF-/IF-Module mapped;
68 SYS_OVD_FLUID_D override of the standard discharge path (.x suffix for location)Übersteuerung des hydraulischen Standard-Ausgang des Systems CIF-/IF-Module mapped;
69 SYS_OVD_OFF Priority offVorrang AUS CIF-/IF-Module mapped;
70 E069 -- CIF-/IF-Module mapped;
71 E070 Internal communication error interner Kommunikationsfehler (SPI) CIF-/IF-Module mapped; IL_E, …; MVIE, …;
72 E071 memory-errorSpeicherfehler CIF-/IF-Module mapped; IL_E, …; MVIE, …;
73 E072 Power components/ frequency converterLeistungsteil/Umrichter CIF-/IF-Module mapped; IL_E, …; MVIE, …;
74 E073 Frequency converter numberFrequenz-Umrichter-Nummer CIF-/IF-Module mapped;
75 E074 Internal fan defectInterner Lüfter defekt CIF-/IF-Module mapped;
76 E075 Inrush current relay defectLaderelais defekt CIF-/IF-Module mapped; MVIE, …;
77 E076 Current sensor defectLEM-Wandler defekt CIF-/IF-Module mapped; IL_E, …;
78 E077 24V supply voltage defect24V Versorgungsspannung CIF-/IF-Module mapped; IL_E, …;
79 E078 Unknown motor numberunbekannte Motornummer CIF-/IF-Module mapped;
80 E079 -- CIF-/IF-Module mapped;
81 PUMP_FAULT Pump (collective fault)Pumpe (SSM) CIF-/IF-Module mapped;
82 E081 Prealarm frequency converter (overtemperature, overload,…)Voralarm Frequenz-Umrichter (Übertemperatur, Überlast,…) CIF-/IF-Module mapped;
83 E082 Frequency converterFrequenz-Umrichter CIF-/IF-Module mapped;
84 E083 -- CIF-/IF-Module mapped;
85 E084 -- CIF-/IF-Module mapped;
86 E085 -- CIF-/IF-Module mapped;
87 E086 -- CIF-/IF-Module mapped;
88 E087 -- CIF-/IF-Module mapped;
89 E088 -- CIF-/IF-Module mapped;
90 MOT_MOD_FAULT Motor or module faultMotor- oder Modulfehler CIF-/IF-Module mapped;
91 E090 Implausible combination Plausibilitätsfehler CIF-/IF-Module mapped;
92 E091 -- CIF-/IF-Module mapped;
93 E092 -- CIF-/IF-Module mapped;
94 E093 -- CIF-/IF-Module mapped;
95 E094 -- CIF-/IF-Module mapped;
96 E095 -- CIF-/IF-Module mapped;
97 E096 Infobyte not setInfobyte nicht gesetzt CIF-/IF-Module mapped; IL_E, …;
98 E097 Flexpump type data missingFlexpumpdatensatz fehlt CIF-/IF-Module mapped; IL_E, …;
99 E098 Flexpump type data not valid (Checksum)Flexpumpdatensatz ist ungültig (Checksummenfehler) CIF-/IF-Module mapped; IL_E, …;
100 E099 Pump typePumpentyp CIF-/IF-Module mapped;
101 CTRL_BATT Battery downBatteriefehler ggfs. Mit Zusatz.x CIF-/IF-Module mapped;
102 PAN_TEMP_HI Panel overtemperature Schaltschrankübertemperatur CIF-/IF-Module mapped;
103 PAN_TEMP_LO Panel low temperatureSchaltschrankuntertemperatur CIF-/IF-Module mapped;
104 PAN_FAN_INT Panel fan defectSchaltschranklüfter defekt CIF-/IF-Module mapped;
105 MOT_FAN_EXT External fan motor defectFremdlüfter Motor defekt CIF-/IF-Module mapped;
106 CTRL_SHORT_CIRC Control / power circuit short circuit (.x suffix for location)Steuer/Leistungskreis Kurzschluss (ggfs. Zusatz .x) CIF-/IF-Module mapped;
107 CTRL_OPEN_LOOP Control / power circuit open loop (.x suffix for location)Steuer/Leistungskreis Unterbrechung (ggfs. Zusatz .x) CIF-/IF-Module mapped;
108 CTRL_ELEC_FAULT Control / power circuit electrical fault (.x suffix for location)Generischer elektrischer Fehler CIF-/IF-Module mapped;
109 E108 Reserved block for controller faultsFehlerblock Reglerfehler CIF-/IF-Module mapped;
110 CTRL_EXT_FAULT external errorexterner Fehler CIF-/IF-Module mapped;
111 E110 loss of syncSynchronisationsverlust CIF-/IF-Module mapped;
112 E111 overcurrentÜberstrom CIF-/IF-Module mapped;
113 E112 Motor speed higher than synchronous valueDrehzahl Motor übersynchron CIF-/IF-Module mapped;
114 E113 CIF-/IF-Module mapped;
115 E114 CIF-/IF-Module mapped;
116 E115 CIF-/IF-Module mapped;
117 E116 CIF-/IF-Module mapped;
118 E117 CIF-/IF-Module mapped;
119 E118 CIF-/IF-Module mapped;
120 MOT_TURBINE turbine drivenTurbinenbetrieb (Fehler) CIF-/IF-Module mapped;
121 E120 Reservedreserviert CIF-/IF-Module mapped;
122 E121 Sensor error motor PTC short circuitSensorfehler Motor PTC Kurzschluss CIF-/IF-Module mapped;
123 E122 Sensor error hybrid module open loopSensorfehler Hybrid Unterbrechung CIF-/IF-Module mapped;
124 E123 Sensor error hybrid module short circuitSensorfehler Hybrid Kurzschluss CIF-/IF-Module mapped;
125 E124 sensor error electronics open loopSensorfehler Modul Unterbrechung CIF-/IF-Module mapped;
126 E125 sensor error electronics short circuitSensorfehler Modul Kurzschluss CIF-/IF-Module mapped;
127 E126 CIF-/IF-Module mapped;
128 E127 CIF-/IF-Module mapped;
129 E128 CIF-/IF-Module mapped;
130 E129 CIF-/IF-Module mapped;
131 ENG_FUEL fuel level lowMindeststand Treibstoff CIF-/IF-Module mapped;
132 ENG_PREHEAT preheating engineMotorvorheizung CIF-/IF-Module mapped;
133 ENG_PRESS_OIL_LO oil pressureNiedriger Öldruck CIF-/IF-Module mapped;
134 ENG_TEMP_HI overtemperature motorÜbertemperatur Motor CIF-/IF-Module mapped;
135 E134 Anlassritzel CIF-/IF-Module mapped;
136 E135 Ritzelkreis unterbrochen CIF-/IF-Module mapped;
137 E136 Anlassen fehlgeschlagen CIF-/IF-Module mapped;
138 ENG_DRIVE_BELT drive beltRiemenriss CIF-/IF-Module mapped;
139 ENG_FLUID_LO Cooling liquid level motorKühlflüssigkeitsmangel Motor CIF-/IF-Module mapped;
140 E139 Fehler Filter verstopft CIF-/IF-Module mapped;
141 E140 Monitoring switching frequency Überwachung Schalthäufigkeit, ggfs. mit Zusatz .x (für Ort) CIF-/IF-Module mapped;
142 E141 Monitoring of runtimeLaufzeitüberwachung, ggfs mit Zusatz .x (Ort) CIF-/IF-Module mapped;
143 MAINS_FALLBACK Mains supply switched to fallback sourceNetz-Versorgung umgeshaltet auf Ersatzversorgung CIF-/IF-Module mapped;
144 E143 CIF-/IF-Module mapped;
145 E144 CIF-/IF-Module mapped;
146 E145 CIF-/IF-Module mapped;
147 E146 CIF-/IF-Module mapped;
148 E147 CIF-/IF-Module mapped;
149 E148 CIF-/IF-Module mapped;
150 E149 CIF-/IF-Module mapped;
151 E150 error air supply fan motorFehler Belüftung Motor CIF-/IF-Module mapped;
152 E151 CIF-/IF-Module mapped;
153 E152 CIF-/IF-Module mapped;
154 E153 CIF-/IF-Module mapped;
155 E154 CIF-/IF-Module mapped;
156 E155 CIF-/IF-Module mapped;
157 E156 CIF-/IF-Module mapped;
158 E157 CIF-/IF-Module mapped;
159 E158 CIF-/IF-Module mapped;
160 E159 CIF-/IF-Module mapped;
161 SUBS_ELECTR_F general fault of subsystem electronics CIF-/IF-Module mapped;
162 E161 CIF-/IF-Module mapped;
163 E162 CIF-/IF-Module mapped;
164 E163 CIF-/IF-Module mapped;
165 E164 CIF-/IF-Module mapped;
166 E165 CIF-/IF-Module mapped;
167 E166 CIF-/IF-Module mapped;
168 E167 CIF-/IF-Module mapped;
169 E168 CIF-/IF-Module mapped;
170 E169 CIF-/IF-Module mapped;
171 E170 CIF-/IF-Module mapped;
172 E171 CIF-/IF-Module mapped;
173 E172 CIF-/IF-Module mapped;
174 E173 CIF-/IF-Module mapped;
175 E174 CIF-/IF-Module mapped;
176 E175 CIF-/IF-Module mapped;
177 E176 CIF-/IF-Module mapped;
178 E177 CIF-/IF-Module mapped;
179 E178 CIF-/IF-Module mapped;
180 E179 CIF-/IF-Module mapped;
181 E180 CIF-/IF-Module mapped;
182 E181 CIF-/IF-Module mapped;
183 E182 CIF-/IF-Module mapped;
184 E183 CIF-/IF-Module mapped;
185 E184 CIF-/IF-Module mapped;
186 E185 CIF-/IF-Module mapped;
187 E186 CIF-/IF-Module mapped;
188 E187 CIF-/IF-Module mapped;
189 E188 CIF-/IF-Module mapped;
190 E189 CIF-/IF-Module mapped;
191 E190 CIF-/IF-Module mapped;
192 E191 CIF-/IF-Module mapped;
193 E192 CIF-/IF-Module mapped;
194 E193 CIF-/IF-Module mapped;
195 E194 CIF-/IF-Module mapped;
196 E195 CIF-/IF-Module mapped;
197 E196 CIF-/IF-Module mapped;
198 E197 CIF-/IF-Module mapped;
199 E198 CIF-/IF-Module mapped;
200 E199 CIF-/IF-Module mapped;
201 SIM_A Error type A (simulated)Fehler Typ A (simuliert) CIF-/IF-Module mapped;
202 SIM_B Error type B (simulated)Fehler Typ B (simuliert) CIF-/IF-Module mapped;
203 SIM_C Error type C (simulated)Fehler Typ C (simuliert) CIF-/IF-Module mapped;
204 SIM_D Error type D (simulated)Fehler Typ D (simuliert) CIF-/IF-Module mapped;
205 SIM_E Error type E (simulated)Fehler Typ E (simuliert) CIF-/IF-Module mapped;
206 SIM_F Warning type F (simulated)Warnung Typ F (simuliert) CIF-/IF-Module mapped;
207 E206 CIF-/IF-Module mapped;
208 E207 CIF-/IF-Module mapped;
209 E208 CIF-/IF-Module mapped;
210 E209 CIF-/IF-Module mapped;
211 E210 CIF-/IF-Module mapped;
212 E211 CIF-/IF-Module mapped;
213 E212 CIF-/IF-Module mapped;
214 E213 CIF-/IF-Module mapped;
215 E214 CIF-/IF-Module mapped;
216 E215 CIF-/IF-Module mapped;
217 E216 CIF-/IF-Module mapped;
218 E217 CIF-/IF-Module mapped;
219 E218 CIF-/IF-Module mapped;
220 E219 CIF-/IF-Module mapped;
221 E220 CIF-/IF-Module mapped;
222 E221 CIF-/IF-Module mapped;
223 E222 CIF-/IF-Module mapped;
224 E223 CIF-/IF-Module mapped;
225 E224 CIF-/IF-Module mapped;
226 E225 CIF-/IF-Module mapped;
227 E226 CIF-/IF-Module mapped;
228 E227 CIF-/IF-Module mapped;
229 E228 CIF-/IF-Module mapped;
230 E229 CIF-/IF-Module mapped;
231 E230 CIF-/IF-Module mapped;
232 E231 CIF-/IF-Module mapped;
233 E232 CIF-/IF-Module mapped;
234 E233 CIF-/IF-Module mapped;
235 E234 CIF-/IF-Module mapped;
236 E235 CIF-/IF-Module mapped;
237 E236 CIF-/IF-Module mapped;
238 E237 CIF-/IF-Module mapped;
239 E238 CIF-/IF-Module mapped;
240 E239 CIF-/IF-Module mapped;
241 E240 CIF-/IF-Module mapped;
242 E241 CIF-/IF-Module mapped;
243 E242 CIF-/IF-Module mapped;
244 E243 CIF-/IF-Module mapped;
245 E244 CIF-/IF-Module mapped;
246 E245 CIF-/IF-Module mapped;
247 E246 CIF-/IF-Module mapped;
248 E247 CIF-/IF-Module mapped;
249 E248 CIF-/IF-Module mapped;
250 E249 CIF-/IF-Module mapped;
251 E250 CIF-/IF-Module mapped;
252 EXTENDED_WARN extended codeErweiterter Kode, Statusbit für Warnung gesetzt CIF-/IF-Module mapped;
253 EXTENDED_ERR extended codeErweiterter Kode, Statusbit für Fehler gesetzt CIF-/IF-Module mapped;
254 EXTENDED extended codeErweiterter Kode, keine Statusbits gesetzt CIF-/IF-Module mapped;
255 UNDEFINED undefined errorNicht definierter Fehler CIF-/IF-Module mapped;
256 INVALID invalid errorUngültiger Fehler CIF-/IF-Module mapped;

This is the base signal. The current warning or error can be read out here. It is the WILO error code where the different codes can be found in the pump manual.Dieses Signal ist das Grundsignal. Die aktuelle Warnung oder Fehlermeldung kann hier abgelesen werden. Die Kodierung ist der WILO-Fehlercode, der auch im Pumpenhandbuch zu finden ist.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.13.2 System Command Timer active

propertyEigenschaft valueWert
instance #Instanz-Nr. 2
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 OFF The functionality Bus Command timer is deactivated. The local operation is blocked permanently.Die Funktion Bus Command Timer ist deaktiviert. Die lokale Pumpenbedienung ist dauernd gesperrt. CIF-/IF-Module internal;
2 SET This value starts a lockout time for the local pump operation. The lockout time may be adjustable.Dieser Wert startet eine Sperrzeit für die lokale Pumpenbedienung. Die Sperrzeit ist ggfs. einstellbar. CIF-/IF-Module internal;
3 ACTIVE This value indicates that the lockout time is active.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, derzeit läuft. CIF-/IF-Module internal;
4 RESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET" has elapsed. Local operation of the device is possible, the write to the device over the communication interface is blocked.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, abgelaufen ist. Die lokale Bedienung ist möglich, das Schreiben über die Kommunikationsschnittstelle ist gesperrt. CIF-/IF-Module internal;
5 MANUAL This value indicates that the local as well as the remote operation is possible. The commands are accepted according "last write wins".Dieser Wert zeigt an, dass sowohl die lokale Bedienung, als auch die Bedienung über die Kommunikationsverbindung möglich ist. Der letzte Befehl wird übernommen. CIF-/IF-Module internal;
6 SET_PRESET This value starts a lockout time for the local pump operation. After the lockout time has elapsed, PRESET values are used for operation. The lockout time may be adjustable.Dieser Wert startet eine Sperrzeit für die lokale Pumpenbedienung. Nach Ablauf der Sperrzeit werden voreingestellte Werte (PRESET) als Vorgabe gesetzt. Die Sperrzeit ist ggfs. einstellbar. CIF-/IF-Module internal;
7 ACTIVE_PRESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET_PRESET" is currently active. After the lockout time has elapsed, PRESET values are used for operation.Dieser Wert zeigt an, dass die Sperrzeit, welche mit dem Signal "Bus Command Timer SET" aktiviert wurde, derzeit läuft. Nach Ablauf der Sperrzeit werden voreingestellte Werte (PRESET) als Vorgabe gesetzt. CIF-/IF-Module internal;
8 RESET_PRESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET" has elapsed. Local operation of the device is possible, the write to the device over the communication link is blocked. When this signal becomes ative, PRESET values are set once for operation.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, abgelaufen ist. Die lokale Bedienung ist möglich, das Schreiben über das Kommunikationsinterface ist gesperrt. Sobald dises Signal aktiv wird, werden einmalig voreingestellte Werte (PRESET) als Vorgabe gesetzt. CIF-/IF-Module internal;
9 MANUAL_PRESET This value indicates that the local as well as the remote operation is possible. The commands are accepted according "last write wins". When this signal becomes active, PRESET values are loaded once.Dieser Wert zeigt an, dass sowohl die lokale Bedienung, als auch die Bedienung über die Kommunikationsverbindung möglich ist. Der letzte Befehl wird übernommen. Wenn dieser Wert aktiv wird, werden einmalig PRESET Werte als Vorgabe übernommen. CIF-/IF-Module internal;
10 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This is the base signal. When using an IF-Module the local menu may be disabled by factory setting. The local menu can be enabled permanently by writing the value MANUAL. To use the local menu only when the BAS system fails, repeate writing the value SET at least before the optional Bus Command Timer timeout time (default or fixed value 300 s). The activation is stored and survives a power on reset. When the mechanism is no longer needed, write OFF to reset to factory setting. If the BAS fails,Then the menu can be entered to adjust the settings. E50 may be displayed at the pump. If it is desired to load fallback values when the bus failure event occures, then use SET_PRESET instead of SET to trigger the bus command timer. This functionality is available with Modbus and BACnet in IF-modules starting with firmware SW > 2.00. For CIF-modules, there is no restriction.Dieses Signal ist das Grundsignal. Wenn ein IF-Modul benutzt wird, ist in der Werkseinstellung das Menü der Pumpe ggfs. verriegelt. Beim Wert MANUAL ist das Menü dauerhaft freigegeben. Um das lokale Menü nur bei Feldbus-Ausfall zu öffen, schreiben Sie den Wert SET immer innerhalb der optional verfügbaren Bus Command Timer timeout Zeit (default bzw. fester Wert von 300 s). Die Aktivierung wird gespeichert und überlebt einen Spannungsreset. Wenn der Mechanismus nicht mehr benötigt wird, schreiben Sie OFF, um zur Werkseinstellung zurückzukehren. Wenn der Bus Command Timer abläuft, wird ggfs. E54 im Display angezeigt. Dann können im Menü Einstellungen vorgenommen werden. Um bei einem Bus-Ausfall nicht nur die lokale Bedienung zu erlauben, sondern auch Rückfall- (Fallback) Werte zu laden, schreiben Sie statt SET SET_PRESET. Die Fallback-Werte sind in separaten Datenpunkten realisiert und haben "PRESET" im Namen. Diese Funktion ist bei IF-Modulen erst ab SW > 2.00 realisiert, bei CIF-Modulen ist sie immer vorhanden.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.13.3 Setpoint Signal Source active

propertyEigenschaft valueWert
instance #Instanz-Nr. 3
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 IF-Module Signal source for setpoint: IF-ModuleSollwertquelle IF-Modul Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;
2 0…10 V Signal source for setpoint: IN2 mode 0…10 VSollwertquelle: IN2 Modus 0…10 V CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
3 2…10 V Signal source for setpoint: IN2 mode 2…10 VSollwertquelle: IN2 Modus 2…10 V CIF-/IF-Module mapped; IL_E, …; MVIE, …;
4 0…20 mA Signal source for setpoint: IN2 mode 0…20 mASollwertquelle: IN2 Modus 0…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
5 4…20 mA Signal source for setpoint: IN2 mode 4…20 mASollwertquelle: IN2 Modus 4…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
6 Internal Signal source for setpoint: internalSollwertquelle: Intern Stratos MAXO; Stratos GIGA 2.0;
7 EXT 1 Signal source for setpoint: EXT 1Sollwertquelle: EXT 1 Stratos MAXO; Stratos GIGA 2.0;
8 EXT 2 Signal source for setpoint: EXT 2Sollwertquelle: EXT 2 Stratos MAXO; Stratos GIGA 2.0;
9 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This is the base signal. This signal represents the source for the setpoint for the current control function.Dieses Signal ist das Grundsignal. Dieses Signal enthält die Sollwertquelle in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.13.4 User Trouble Code out

propertyEigenschaft valueWert
instance #Instanz-Nr. 4
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 CODE_0 no errorno error CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
402 CODE_401 Voltage fluctuations in MainsVoltage fluctuations in Mains CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
403 CODE_402 Mains voltage too lowMains voltage too low CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
404 CODE_403 Mains voltage too highMains voltage too high CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
405 CODE_404 Shaft is mechanically blocked or motor defectShaft is mechanically blocked or motor defect CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
406 CODE_405 Electronic module temperature too highElectronic module temperature too high CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
407 CODE_406 Motor temperature too high or connection of motor PTC resistorMotor temperature too high or connection of motor PTC resistor CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
408 CODE_407 Contact between motor and module, motor or module defectContact between motor and module, motor or module defect CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
409 CODE_408 The flow is driving the pump impeller (flow against flow direction)The flow is driving the pump impeller (flow against flow direction) CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
410 CODE_409 Software update incompleteSoftware update incomplete CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
411 CODE_410 External input power supply overload and binary Ext OffExternal input power supply overload and binary Ext Off CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
412 CODE_411 Missing Mains PhaseMissing Mains Phase CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
413 CODE_412 Dry runningDry running CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
421 CODE_420 Motor or electronic Module defectMotor or electronic Module defect CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
422 CODE_421 Electronic Module DefectElectronic Module Defect CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
551 CODE_550 The flow is driving the pump impeller (flow against flow direction)The flow is driving the pump impeller (flow against flow direction) CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
552 CODE_551 Mains voltage too lowMains voltage too low CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
553 CODE_552 Pump operated in generator mode (flow in flow direction)Pump operated in generator mode (flow in flow direction) CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
554 CODE_553 Electronic module failureElectronic module failure CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
555 CODE_554 MFA connection lostMFA connection lost CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
556 CODE_555 Sensorvalue implausible on Analog In 1Sensorvalue implausible on Analog In 1 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
557 CODE_556 Open Loop on Analog In 1Open Loop on Analog In 1 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
558 CODE_557 Sensor value implausible on Analog In 2Sensor value implausible on Analog In 2 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
559 CODE_558 Open Loop on Analog In 2Open Loop on Analog In 2 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
560 CODE_559 electronic module temperature too highelectronic module temperature too high CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
561 CODE_560 Software Update incompleteSoftware Update incomplete CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
562 CODE_561 External Input Power Supply Overload and Binary Input not availableExternal Input Power Supply Overload and Binary Input not available CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
563 CODE_562 External Input Power Supply Overload and Analog Input not availableExternal Input Power Supply Overload and Analog Input not available CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
564 CODE_563 IF module sensor input missingIF module sensor input missing CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
565 CODE_564 IF module setpoint input missingIF module setpoint input missing CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
566 CODE_565 Input signal too high on Analog In 1Input signal too high on Analog In 1 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
567 CODE_566 Input signal too high on Analog In 2Input signal too high on Analog In 2 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
568 CODE_567 Sensor calibration missing (Sensor + Module)Sensor calibration missing (Sensor + Module) CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
569 CODE_568 Sensor defectSensor defect CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
570 CODE_569 Configuration lostConfiguration lost CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
571 CODE_570 Electronic module temperature too highElectronic module temperature too high CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
572 CODE_571 Double pump connection lostDouble pump connection lost CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
573 CODE_572 Dry runningDry running CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
574 CODE_573 No communication to HMINo communication to HMI CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
575 CODE_574 No communication to IF moduleNo communication to IF module CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
576 CODE_575 No Bluetooth communicationNo Bluetooth communication CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
577 CODE_576 No communication to Wilo sensorNo communication to Wilo sensor CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
578 CODE_577 Software update abortedSoftware update aborted CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
579 CODE_578 HMI defectHMI defect CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
580 CODE_579 HMI software incompleteHMI software incomplete CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
581 CODE_580 Number of wrong key inputs reachedNumber of wrong key inputs reached CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
582 CODE_581 Double pump type mismatchDouble pump type mismatch CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
583 CODE_582 Double pump incompatibilityDouble pump incompatibility CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
584 CODE_583 Fluid over temperatureFluid over temperature CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
585 CODE_584 HMI Fatal (file) failureHMI Fatal (file) failure CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
586 CODE_585 Voltage Fluctuation in mainsVoltage Fluctuation in mains CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
587 CODE_586 Mains Voltage too highMains Voltage too high CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
588 CODE_587 Battery lowBattery low CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
589 CODE_588 Fan blocked, defect or not connectedFan blocked, defect or not connected CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
590 CODE_589 Battery emptyBattery empty CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
591 CODE_590 MFA type mismatchMFA type mismatch CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
592 CODE_591 Sensorvalue implausible on Analog In 3Sensorvalue implausible on Analog In 3 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
593 CODE_592 Open Loop on Analog In 3Open Loop on Analog In 3 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
594 CODE_593 Input Signal too high on Analog In 3Input Signal too high on Analog In 3 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
595 CODE_594 Sensorvalue implausible on Analog In 4Sensorvalue implausible on Analog In 4 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
596 CODE_595 Open Loop on Analog In 4Open Loop on Analog In 4 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
597 CODE_596 Input Signal too high on Analog In 4Input Signal too high on Analog In 4 CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
602 CODE_601 Configuration: Setpoint Ext1/2 for CF1 or CF2_HConfiguration: Setpoint Ext1/2 for CF1 or CF2_H CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
603 CODE_602 Configuration: Setpoint IF Module for CF1 or CF2_HConfiguration: Setpoint IF Module for CF1 or CF2_H CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
604 CODE_603 Configuration: Sensor1 Ext1/2 for CF1 or CF2_HConfiguration: Sensor1 Ext1/2 for CF1 or CF2_H CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
605 CODE_604 Configuration: Sensor1/2 identical for CF1 or CF2_HConfiguration: Sensor1/2 identical for CF1 or CF2_H CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
607 CODE_606 Configuration: Sensor1 IF Module for CF1 or CF2_HConfiguration: Sensor1 IF Module for CF1 or CF2_H CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
608 CODE_607 Configuration: Sensor2 Ext1/2 for CF1 or CF2_HConfiguration: Sensor2 Ext1/2 for CF1 or CF2_H CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
610 CODE_609 Configuration: Sensor2 IF Module for CF1 or CF2_HConfiguration: Sensor2 IF Module for CF1 or CF2_H CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
611 CODE_610 Configuration: Sensor1 Ext1/2 for HeatmeteringConfiguration: Sensor1 Ext1/2 for Heatmetering CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
612 CODE_611 Configuration: Sensor1/2 identical for HeatmeteringConfiguration: Sensor1/2 identical for Heatmetering CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
615 CODE_614 Configuration: Sensor1 IF Module for HeatmeteringConfiguration: Sensor1 IF Module for Heatmetering CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
616 CODE_615 Configuration: Sensor2 Ext1/2 for HeatmeteringConfiguration: Sensor2 Ext1/2 for Heatmetering CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
619 CODE_618 Configuration: Sensor2 IF Module for HeatmeteringConfiguration: Sensor2 IF Module for Heatmetering CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
620 CODE_619 Configuration: Sensor Ext1/2 for Automatic SwitchingConfiguration: Sensor Ext1/2 for Automatic Switching CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
622 CODE_621 Configuration: Sensor IF Module for Automatic SwitchingConfiguration: Sensor IF Module for Automatic Switching CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
642 CODE_641 Configuration: Setpoint Ext1/2 for CF2_CConfiguration: Setpoint Ext1/2 for CF2_C CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
643 CODE_642 Configuration: Setpoint IF Module for CF2_CConfiguration: Setpoint IF Module for CF2_C CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
644 CODE_643 Configuration: Sensor1 Ext1/2 for CF2_CConfiguration: Sensor1 Ext1/2 for CF2_C CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
645 CODE_644 Configuration: Sensor1/2 identical for CF2_CConfiguration: Sensor1/2 identical for CF2_C CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
647 CODE_646 Configuration: Sensor1 IF Module for CF2_CConfiguration: Sensor1 IF Module for CF2_C CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
648 CODE_647 Configuration: Sensor2 Ext1/2 for CF2_CConfiguration: Sensor2 Ext1/2 for CF2_C CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
650 CODE_649 Configuration: Sensor2 IF Module for CF2_CConfiguration: Sensor2 IF Module for CF2_C CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
651 CODE_650 Configuration: MFA no secondary pumpConfiguration: MFA no secondary pump CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
652 CODE_651 Configuration: DP sensor for head measurementConfiguration: DP sensor for head measurement CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
653 CODE_652 Configuration: P-Sensor for pressure measurement on discharge sideConfiguration: P-Sensor for pressure measurement on discharge side CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
654 CODE_653 Configuration: P-Sensor for pressure measurement on suction sideConfiguration: P-Sensor for pressure measurement on suction side CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
655 CODE_654 Configuration: Sensors identical for discharge and suction sideConfiguration: Sensors identical for discharge and suction side CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
656 CODE_655 Configuration: Sensor for medium temperature measurementConfiguration: Sensor for medium temperature measurement CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
657 CODE_656 Configuration: Function requires medium temperature but no sensor configuredConfiguration: Function requires medium temperature but no sensor configured CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
658 CODE_657 Configuration: Function requires head or flow but missing sensor configurationConfiguration: Function requires head or flow but missing sensor configuration CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
889 CODE_888 not definednot defined CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;
1000 CODE_999 do not show to userdo not show to user CIF-/IF-Module mapped; Stratos MAXO; Stratos GIGA 2.0;

This is the base signal. The current warning or error can be read out here. It is the WILO error code where the different codes can be found in the pump manual.Dieses Signal ist das Grundsignal. Die aktuelle Warnung oder Fehlermeldung kann hier abgelesen werden. Die Kodierung ist der WILO-Fehlercode, der auch im Pumpenhandbuch zu finden ist.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.13.18 Analog In 1 Measured Val. units out

propertyEigenschaft valueWert
instance #Instanz-Nr. 18
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This is the base signal. This signal represents the measured value of the analog input #1.Dieses Signal ist das Grundsignal. Dieses Signal liefert den Messwert des Analogeingangs # 1.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.13.19 Analog In 2 Measured Val. units out

propertyEigenschaft valueWert
instance #Instanz-Nr. 19
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.02…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This is the base signal. This signal represents the measured value of the analog input #2.Dieses Signal ist das Grundsignal. Dieses Signal liefert den Messwert des Analogeingangs # 2.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0;

6.2.13.33 duty point (rel.) units active

propertyEigenschaft valueWert
instance #Instanz-Nr. 33
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.13.48 Analog In 3 Measured Val. units out

propertyEigenschaft valueWert
instance #Instanz-Nr. 48
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module BACnet MS/TP (5.00…99.99), CIF-Module Ethernet Multiprotocol (5.00…99.99), CIF-Module Ethernet Multiprotocol (3.03…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This is the base signal. This signal represents the measured value of the analog input #3.Dieses Signal ist das Grundsignal. Dieses Signal liefert den Messwert des Analogeingangs # 3.

Support referenceWird unterstützt durch:

Stratos GIGA 2.0;

6.2.13.49 Analog In 4 Measured Val. units out

propertyEigenschaft valueWert
instance #Instanz-Nr. 49
functionFunktion output valueAusgangswert
Module versionsModul-Versionen CIF-Module BACnet MS/TP (5.00…99.99), CIF-Module Ethernet Multiprotocol (5.00…99.99), CIF-Module Ethernet Multiprotocol (3.03…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This is the base signal. This signal represents the measured value of the analog input #4.Dieses Signal ist das Grundsignal. Dieses Signal liefert den Messwert des Analogeingangs # 4.

Support referenceWird unterstützt durch:

Stratos GIGA 2.0;

6.2.13.1003 Setpoint Signal Source B

propertyEigenschaft valueWert
instance #Instanz-Nr. 1003
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 IF-Module Signal source for setpoint: IF-ModuleSollwertquelle IF-Modul Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;
2 0…10 V Signal source for setpoint: IN2 mode 0…10 VSollwertquelle: IN2 Modus 0…10 V CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
3 2…10 V Signal source for setpoint: IN2 mode 2…10 VSollwertquelle: IN2 Modus 2…10 V CIF-/IF-Module mapped; IL_E, …; MVIE, …;
4 0…20 mA Signal source for setpoint: IN2 mode 0…20 mASollwertquelle: IN2 Modus 0…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
5 4…20 mA Signal source for setpoint: IN2 mode 4…20 mASollwertquelle: IN2 Modus 4…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
6 Internal Signal source for setpoint: internalSollwertquelle: Intern Stratos MAXO; Stratos GIGA 2.0;
7 EXT 1 Signal source for setpoint: EXT 1Sollwertquelle: EXT 1 Stratos MAXO; Stratos GIGA 2.0;
8 EXT 2 Signal source for setpoint: EXT 2Sollwertquelle: EXT 2 Stratos MAXO; Stratos GIGA 2.0;
9 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This is the base signal. This signal represents the source for the setpoint for the current control function.Dieses Signal ist das Grundsignal. Dieses Signal enthält die Sollwertquelle in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.13.1033 duty point (rel.) units A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1033
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.13.1133 duty point (rel.) preset units A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1133
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This incorporates a preset or fallback function for the following signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dies beinhaltet eine Voreinstellung für das folgende Signal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.13.1233 duty point (rel.) aux. units A

propertyEigenschaft valueWert
instance #Instanz-Nr. 1233
functionFunktion readback input value (A)Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This defines an alternative value for the following signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dies definiert einen alternativen Wert für das folgende Signal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.13.2000 Control Function B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2000
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 Gen_Spd This control mode operates the device with constant speed.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
2 CONST_FREQ reservedreserviert
3 CONST_POWER reservedreserviert
4 CONST_HEAD reservedreserviert
5 Gen_PConst This control mode operates the device with constant discharge pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Ausgangsdruck. MVIE, …;
6 Gen_PHdConst This control mode operates the device with constant differential pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
7 Gen_PHdVar This control mode operates the device with a differential pressure which varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
8 CONST_FLOW reservedreserviert
9 Gen_T This control mode operates the device with constant temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
10 Gen_TDiff This control mode operates the device with constant differential temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
11 CONST_LEV reservedreserviert
12 TEMP_VARIABLE This control mode operates the device with a differential pressure which varies with the fluid temperature.Diese Steuerungsart betreibt das Gerät mit mediumstemperaturabhängigem Differenzdruck (Δp-c=F(T)) . CIF-/IF-Module internal; Stratos;
13 Gen_UsrDfd This control mode operates the device with user configurable PID controller.Diese Steuerungsart betreibt das Gerät mit einem frei konfigurierbaren PID-Regler für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; IL_E, …; MVIE, …;
14 Gen_PVar This control mode operates the device with a discharge pressure that varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigen Ausgangsdruck. MVIE, …;
15 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;
16 HeatRadiator_PHd This control mode operates the device with a differential pressure which varies with the flow for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
17 HeatRadiator_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
18 HeatRadiator_T This control mode operates the device with constant temperature for heating radiator application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
19 HeatFloor_PHd This control mode operates the device with a differential pressure for floor heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
20 HeatFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
21 HeatFloor_T This control mode operates the device with constant temperature for floor heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
22 HeatCeiling_PHd This control mode operates the device with constant differential pressure for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
23 HeatCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
24 HeatCeiling_T This control mode operates the device with constant temperature for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
25 HeatFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
26 HeatFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
27 HeatFan_T This control mode operates the device with constant temperature for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
28 HeatB._T This control mode operates the device with constant temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
29 HeatB._TDiff This control mode operates the device with constant differential temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
30 HeatB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
31 HeatE._T This control mode operates the device with constant temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
32 HeatE._TDiff This control mode operates the device with constant differential temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
33 HeatE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
34 Heat_PHdConst This control mode operates the device with constant differential pressure for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
35 Heat_PHdVar This control mode operates the device with a differential pressure which varies with the flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
36 Heat_PHdExt This control mode operates the device with constant differential pressure for heating applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
37 Heat_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
38 Heat_VolFlow This control mode operates the device with constant volume flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
39 Heat_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
40 Heat_T This control mode operates the device with constant temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
41 Heat_TDiff This control mode operates the device with constant differential temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
42 Heat_Spd This control mode operates the device with constant speed for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
43 CoolCeiling_PHd This control mode operates the device with constant differential pressure for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
44 CoolCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
45 CoolCeiling_T This control mode operates the device with constant temperature for ceiling refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
46 CoolFloor_PHd This control mode operates the device with constant differential pressure for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
47 CoolFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
48 CoolFloor_T This control mode operates the device with constant temperature mode for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
49 CoolFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstronmabhängigem Differenzdruck für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
50 CoolFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
51 CoolFan_T This control mode operates the device with constant temperature mode for fan coil refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
52 CoolB._T This control mode operates the device with constant temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
53 CoolB._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
54 CoolB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
55 CoolE._T This control mode operates the device with constant temperature mode for refrigeration application with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungs-Anwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
56 CoolE._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
57 CoolE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with heat exhanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Wärmetauscher Stratos MAXO; Stratos GIGA 2.0;
58 Cool_PHdConst This control mode operates the device with constant differential pressure for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
59 Cool_PHdVar This control mode operates the device with a differential pressure which varies with the flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
60 Cool_PHdExt This control mode operates the device with constant differential pressure for refrigeration application with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
61 Cool_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
62 Cool_VolFlow This control mode operates the device with constant volume flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
63 Cool_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen Stratos MAXO; Stratos GIGA 2.0;
64 Cool_T This control mode operates the device with constant temperature mode for refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
65 Cool_TDiff This control mode operates the device with constant differential temperature for cooling application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
66 Cool_Spd This control mode operates the motor with constant speed for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
67 San_Circ._T This control mode operates the device with constant temperature for sanitary hot water circulation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Zirkulations-Anwendungen. Stratos MAXO;
68 SanW.Heat._TDiff This control mode operates the device with constant differential temperature for sanitary hot water application with heat exchanger in the storage tank.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen mit Wärmetauscher im Warmwasserspeicher Stratos MAXO; Stratos GIGA 2.0;
69 SanL.S._T reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
70 SanL.S._Acc.Flow reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
71 San_PHdConst This control mode operates the device with constant differential pressure for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
72 San_PHdVar This control mode operates the device with a differential pressure which varies with the flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
73 San_PHdExternal This control mode operates the device with constant differential pressure for sanitary hot water applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
74 San_VolFlow This control mode operates the device with constant volume flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
75 San_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Trink-Warmwasser-Anwendungen Stratos MAXO; Stratos GIGA 2.0;
76 San_T This control mode operates the device with constant temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
77 San_TDiff This control mode operates the device with constant differential temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
78 San_Spd This control mode operates the motor with constant speed for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
79 Gen_PHdExt This control mode operates the device with constant differential pressure for generic applications with external diffential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
80 Gen_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for generic applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
81 Gen_VolFlow This control mode operates the device with constant volume flow for generic applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
82 Gen_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for generic applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
83 ScndPHdConst This control mode operates the device with constant differential pressure. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
84 ScndPHdVar This control mode operates the device with a differential pressure which varies with the flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
85 ScndFlow This control mode operates the device with constant volume flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
86 ScndSpd This control mode operates the motor with constant speed. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
87 HeatConcrete_PHd This control mode operates the device with a differential pressure for concrete core activation heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
88 HeatConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
89 HeatConcrete_TDiff This control mode operates the device with constant differential temperature for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
90 HeatConcrete_Flow This control mode operates the device with constant volume flow for heating applications with concrete core activation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
91 HeatBottle_Flow This control mode operates the device with constant volume flow for heating applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
92 HeatMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
93 HeatMan_Flow This control mode operates the device with constant volume flow for heating applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
94 HeatTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with storage tank.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
95 HeatTank_Flow This control mode operates the device with constant volume flow for heating applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
96 HeatExchanger_Flow This control mode operates the device with constant volume flow for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
97 HeatSource_TDiff This control mode operates the device with constant differential temperature for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
98 HeatSource_Flow This control mode operates the device with constant volume flow for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
99 HeatDistrict_PHdConst This control mode operates the device with a differential pressure for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
100 HeatDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
101 HeatDistrict_PHdExt This control mode operates the device with constant differential pressure for district heating application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernwärme-Anwendungen. Stratos GIGA 2.0;
102 CoolConcrete_PHd This control mode operates the device with a differential pressure for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
103 CoolConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
104 CoolConcrete_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
105 CoolConcrete_Flow This control mode operates the device with constant volume flow for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
106 CoolBottle_Flow This control mode operates the device with constant volume flow for refrigeration applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
107 CoolMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
108 CoolMan_Flow This control mode operates the device with constant volume flow for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
109 CoolTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
110 CoolTank_Flow This control mode operates the device with constant volume flow for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
111 CoolExchanger_Flow This control mode operates the device with constant volume flow for refrigeration applications with heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
112 CoolCondenser_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with recirculating cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
113 CoolCondensor_Flow This control mode operates the device with constant volume flow for refrigeration applications with recirculationg cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
114 CoolDistrict_PHdConst This control mode operates the device with a differential pressure for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
115 CoolDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
116 CoolDistrict_PHdExt This control mode operates the device with constant differential pressure for district refrigeration application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernkühlungs-Anwendungen. Stratos GIGA 2.0;
117 108_RESERVED reserved for future use reserviert
118 109_RESERVED reserved for future use reserviert

This is the base signal. This signal represents the control mode for the device. In case a selected mode is not supported, the device will stay in the previously selected mode.Dieses Signal ist das Grundsignal. Dieses Signal beinhaltet die Steuerungsart für das Gerät. Wird eine gewählte Steuerungsart nicht unterstützt, bleibt das Gerät bei der zuletzt eingestellten Steuerungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.13.2033 duty point (rel.) units B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2033
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 square-feetsquare-feet CIF-/IF-Module mapped;
2 milliamperesmilliamperes CIF-/IF-Module mapped;
3 A amperesamperes CIF-/IF-Module mapped;
4 ohmsohms CIF-/IF-Module mapped;
5 V voltsvolts CIF-/IF-Module mapped;
6 kilovoltskilovolts CIF-/IF-Module mapped;
7 megavoltsmegavolts CIF-/IF-Module mapped;
8 volt-amperesvolt-amperes CIF-/IF-Module mapped;
9 kilovolt-ampereskilovolt-amperes CIF-/IF-Module mapped;
10 megavolt-amperesmegavolt-amperes CIF-/IF-Module mapped;
11 volt-amperes-reactivevolt-amperes-reactive CIF-/IF-Module mapped;
12 kilovolt-amperes-reactivekilovolt-amperes-reactive CIF-/IF-Module mapped;
13 megavolt-amperes-reactivemegavolt-amperes-reactive CIF-/IF-Module mapped;
14 degrees-phasedegrees-phase CIF-/IF-Module mapped;
15 power-factorpower-factor CIF-/IF-Module mapped;
16 joulesjoules CIF-/IF-Module mapped;
17 kilojouleskilojoules CIF-/IF-Module mapped;
18 watt-hourswatt-hours CIF-/IF-Module mapped;
19 kWh kilowatt-hourskilowatt-hours CIF-/IF-Module mapped;
20 btusbtus CIF-/IF-Module mapped;
21 thermstherms CIF-/IF-Module mapped;
22 ton-hourston-hours CIF-/IF-Module mapped;
23 joules-per-kilogram-dry-airjoules-per-kilogram-dry-air CIF-/IF-Module mapped;
24 btus-per-pound-dry-airbtus-per-pound-dry-air CIF-/IF-Module mapped;
25 cycles-per-hourcycles-per-hour CIF-/IF-Module mapped;
26 cycles-per-minutecycles-per-minute CIF-/IF-Module mapped;
27 hertzhertz CIF-/IF-Module mapped;
28 grams-of-water-per-kilogram-dry-airgrams-of-water-per-kilogram-dry-air CIF-/IF-Module mapped;
29 percent-relative-humiditypercent-relative-humidity CIF-/IF-Module mapped;
30 millimetersmillimeters CIF-/IF-Module mapped;
31 metersmeters CIF-/IF-Module mapped;
32 inchesinches CIF-/IF-Module mapped;
33 feetfeet CIF-/IF-Module mapped;
34 watts-per-square-footwatts-per-square-foot CIF-/IF-Module mapped;
35 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
36 lumenslumens CIF-/IF-Module mapped;
37 luxesluxes CIF-/IF-Module mapped;
38 foot-candlesfoot-candles CIF-/IF-Module mapped;
39 kilogramskilograms CIF-/IF-Module mapped;
40 pounds-masspounds-mass CIF-/IF-Module mapped;
41 tonstons CIF-/IF-Module mapped;
42 kilograms-per-secondkilograms-per-second CIF-/IF-Module mapped;
43 kilograms-per-minutekilograms-per-minute CIF-/IF-Module mapped;
44 kilograms-per-hourkilograms-per-hour CIF-/IF-Module mapped;
45 pounds-mass-per-minutepounds-mass-per-minute CIF-/IF-Module mapped;
46 pounds-mass-per-hourpounds-mass-per-hour CIF-/IF-Module mapped;
47 W wattswatts CIF-/IF-Module mapped;
48 kilowattskilowatts CIF-/IF-Module mapped;
49 megawattsmegawatts CIF-/IF-Module mapped;
50 btus-per-hourbtus-per-hour CIF-/IF-Module mapped;
51 horsepowerhorsepower CIF-/IF-Module mapped;
52 tons-refrigerationtons-refrigeration CIF-/IF-Module mapped;
53 pascalspascals CIF-/IF-Module mapped;
54 kilopascalskilopascals CIF-/IF-Module mapped;
55 bar barsbars CIF-/IF-Module mapped;
56 pounds-force-per-square-inchpounds-force-per-square-inch CIF-/IF-Module mapped;
57 centimeters-of-watercentimeters-of-water CIF-/IF-Module mapped;
58 inches-of-waterinches-of-water CIF-/IF-Module mapped;
59 millimeters-of-mercurymillimeters-of-mercury CIF-/IF-Module mapped;
60 centimeters-of-mercurycentimeters-of-mercury CIF-/IF-Module mapped;
61 inches-of-mercuryinches-of-mercury CIF-/IF-Module mapped;
62 Cel degrees-Celsiusdegrees-Celsius CIF-/IF-Module mapped;
63 K degrees-Kelvindegrees-Kelvin CIF-/IF-Module mapped;
64 degrees-Fahrenheitdegrees-Fahrenheit CIF-/IF-Module mapped;
65 degree-days-Celsiusdegree-days-Celsius CIF-/IF-Module mapped;
66 degree-days-Fahrenheitdegree-days-Fahrenheit CIF-/IF-Module mapped;
67 yearsyears CIF-/IF-Module mapped;
68 monthsmonths CIF-/IF-Module mapped;
69 weeksweeks CIF-/IF-Module mapped;
70 daysdays CIF-/IF-Module mapped;
71 hourshours CIF-/IF-Module mapped;
72 minutesminutes CIF-/IF-Module mapped;
73 s secondsseconds CIF-/IF-Module mapped;
74 meters-per-secondmeters-per-second CIF-/IF-Module mapped;
75 kilometers-per-hourkilometers-per-hour CIF-/IF-Module mapped;
76 feet-per-secondfeet-per-second CIF-/IF-Module mapped;
77 feet-per-minutefeet-per-minute CIF-/IF-Module mapped;
78 miles-per-hourmiles-per-hour CIF-/IF-Module mapped;
79 cubic-feetcubic-feet CIF-/IF-Module mapped;
80 cubic-meterscubic-meters CIF-/IF-Module mapped;
81 imperial-gallonsimperial-gallons CIF-/IF-Module mapped;
82 litersliters CIF-/IF-Module mapped;
83 us-gallonsus-gallons CIF-/IF-Module mapped;
84 cubic-feet-per-minutecubic-feet-per-minute CIF-/IF-Module mapped;
85 cubic-meters-per-secondcubic-meters-per-second CIF-/IF-Module mapped;
86 imperial-gallons-per-mimperial-gallons-per-m CIF-/IF-Module mapped;
87 liters-per-secondliters-per-second CIF-/IF-Module mapped;
88 liters-per-minuteliters-per-minute CIF-/IF-Module mapped;
89 us-gallons-per-minuteus-gallons-per-minute CIF-/IF-Module mapped;
90 degrees-angulardegrees-angular CIF-/IF-Module mapped;
91 degrees-Celsius-per-hourdegrees-Celsius-per-hour CIF-/IF-Module mapped;
92 degrees-Celsius-per-minutedegrees-Celsius-per-minute CIF-/IF-Module mapped;
93 degrees-Fahrenheit-per-hourdegrees-Fahrenheit-per-hour CIF-/IF-Module mapped;
94 degrees-Fahrenheit-per-minutedegrees-Fahrenheit-per-minute CIF-/IF-Module mapped;
95 no-unitsno-units CIF-/IF-Module mapped;
96 parts-per-millionparts-per-million CIF-/IF-Module mapped;
97 parts-per-billionparts-per-billion CIF-/IF-Module mapped;
98 percentpercent CIF-/IF-Module mapped;
99 percent-per-secondpercent-per-second CIF-/IF-Module mapped;
100 per-minuteper-minute CIF-/IF-Module mapped;
101 per-secondper-second CIF-/IF-Module mapped;
102 psi-per-degree-Fahrenheitpsi-per-degree-Fahrenheit CIF-/IF-Module mapped;
103 radiansradians CIF-/IF-Module mapped;
104 min-1 revolutions-per-minuterevolutions-per-minute CIF-/IF-Module mapped;
105 currency1currency1 CIF-/IF-Module mapped;
106 currency2currency2 CIF-/IF-Module mapped;
107 currency3currency3 CIF-/IF-Module mapped;
108 currency4currency4 CIF-/IF-Module mapped;
109 currency5currency5 CIF-/IF-Module mapped;
110 currency6currency6 CIF-/IF-Module mapped;
111 currency7currency7 CIF-/IF-Module mapped;
112 currency8currency8 CIF-/IF-Module mapped;
113 currency9currency9 CIF-/IF-Module mapped;
114 currency10currency10 CIF-/IF-Module mapped;
115 square-inchessquare-inches CIF-/IF-Module mapped;
116 square-centimeterssquare-centimeters CIF-/IF-Module mapped;
117 btus-per-poundbtus-per-pound CIF-/IF-Module mapped;
118 centimeterscentimeters CIF-/IF-Module mapped;
119 pounds-mass-per-secondpounds-mass-per-second CIF-/IF-Module mapped;
120 delta-degrees-Fahrenheitdelta-degrees-Fahrenheit CIF-/IF-Module mapped;
121 delta-degrees-Kelvindelta-degrees-Kelvin CIF-/IF-Module mapped;
122 kilohmskilohms CIF-/IF-Module mapped;
123 megohmsmegohms CIF-/IF-Module mapped;
124 millivoltsmillivolts CIF-/IF-Module mapped;
125 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
126 megajoulesmegajoules CIF-/IF-Module mapped;
127 joules-per-degree-Kelvinjoules-per-degree-Kelvin CIF-/IF-Module mapped;
128 joules-per-kilogram-degree-Kelvinjoules-per-kilogram-degree-Kelvin CIF-/IF-Module mapped;
129 kilohertzkilohertz CIF-/IF-Module mapped;
130 megahertzmegahertz CIF-/IF-Module mapped;
131 per-hourper-hour CIF-/IF-Module mapped;
132 milliwattsmilliwatts CIF-/IF-Module mapped;
133 hectopascalshectopascals CIF-/IF-Module mapped;
134 millibarsmillibars CIF-/IF-Module mapped;
135 m3/h cubic-meters-per-hourcubic-meters-per-hour CIF-/IF-Module mapped;
136 liters-per-hourliters-per-hour CIF-/IF-Module mapped;
137 kilowatt-hours-per-square-meterkilowatt-hours-per-square-meter CIF-/IF-Module mapped;
138 kilowatt-hours-per-square-footkilowatt-hours-per-square-foot CIF-/IF-Module mapped;
139 megajoules-per-square-metermegajoules-per-square-meter CIF-/IF-Module mapped;
140 megajoules-per-square-footmegajoules-per-square-foot CIF-/IF-Module mapped;
141 watts-per-square-meterwatts-per-square-meter CIF-/IF-Module mapped;
142 cubic-feet-per-secondcubic-feet-per-second CIF-/IF-Module mapped;
143 percent-obscuration-per-footpercent-obscuration-per-foot CIF-/IF-Module mapped;
144 percent-obscuration-per-meterpercent-obscuration-per-meter CIF-/IF-Module mapped;
145 milliohmsmilliohms CIF-/IF-Module mapped;
146 megawatt-hoursmegawatt-hours CIF-/IF-Module mapped;
147 kilo-btuskilo-btus CIF-/IF-Module mapped;
148 mega-btusmega-btus CIF-/IF-Module mapped;
149 kilojoules-per-kilogramkilojoules-per-kilogram CIF-/IF-Module mapped;
150 megajoules-per-kilogrammegajoules-per-kilogram CIF-/IF-Module mapped;
151 kilojoules-per-degree-Kelvinkilojoules-per-degree-Kelvin CIF-/IF-Module mapped;
152 megajoules-per-degree-Kelvinmegajoules-per-degree-Kelvin CIF-/IF-Module mapped;
153 newtonnewton CIF-/IF-Module mapped;
154 grams-per-secondgrams-per-second CIF-/IF-Module mapped;
155 grams-per-minutegrams-per-minute CIF-/IF-Module mapped;
156 tons-per-hourtons-per-hour CIF-/IF-Module mapped;
157 kilo-btus-per-hourkilo-btus-per-hour CIF-/IF-Module mapped;
158 hundredths-secondshundredths-seconds CIF-/IF-Module mapped;
159 millisecondsmilliseconds CIF-/IF-Module mapped;
160 newton-metersnewton-meters CIF-/IF-Module mapped;
161 millimeters-per-secondmillimeters-per-second CIF-/IF-Module mapped;
162 millimeters-per-minutemillimeters-per-minute CIF-/IF-Module mapped;
163 meters-per-minutemeters-per-minute CIF-/IF-Module mapped;
164 meters-per-hourmeters-per-hour CIF-/IF-Module mapped;
165 cubic-meters-per-minutecubic-meters-per-minute CIF-/IF-Module mapped;
166 meters-per-second-per-secondmeters-per-second-per-second CIF-/IF-Module mapped;
167 amperes-per-meteramperes-per-meter CIF-/IF-Module mapped;
168 amperes-per-square-meteramperes-per-square-meter CIF-/IF-Module mapped;
169 ampere-square-metersampere-square-meters CIF-/IF-Module mapped;
170 faradsfarads CIF-/IF-Module mapped;
171 henryshenrys CIF-/IF-Module mapped;
172 ohm-metersohm-meters CIF-/IF-Module mapped;
173 siemenssiemens CIF-/IF-Module mapped;
174 siemens-per-metersiemens-per-meter CIF-/IF-Module mapped;
175 teslasteslas CIF-/IF-Module mapped;
176 volts-per-degree-Kelvinvolts-per-degree-Kelvin CIF-/IF-Module mapped;
177 volts-per-metervolts-per-meter CIF-/IF-Module mapped;
178 weberswebers CIF-/IF-Module mapped;
179 candelascandelas CIF-/IF-Module mapped;
180 candelas-per-square-metercandelas-per-square-meter CIF-/IF-Module mapped;
181 degrees-Kelvin-per-hourdegrees-Kelvin-per-hour CIF-/IF-Module mapped;
182 degrees-Kelvin-per-minutedegrees-Kelvin-per-minute CIF-/IF-Module mapped;
183 joule-secondsjoule-seconds CIF-/IF-Module mapped;
184 radians-per-secondradians-per-second CIF-/IF-Module mapped;
185 square-meters-per-Newtonsquare-meters-per-Newton CIF-/IF-Module mapped;
186 kilograms-per-cubic-meterkilograms-per-cubic-meter CIF-/IF-Module mapped;
187 newton-secondsnewton-seconds CIF-/IF-Module mapped;
188 newtons-per-meternewtons-per-meter CIF-/IF-Module mapped;
189 watts-per-meter-per-degree-Kelvinwatts-per-meter-per-degree-Kelvin CIF-/IF-Module mapped;
190 micro-siemensmicro-siemens CIF-/IF-Module mapped;
191 cubic-feet-per-hourcubic-feet-per-hour CIF-/IF-Module mapped;
192 us-gallons-per-hourus-gallons-per-hour CIF-/IF-Module mapped;
193 kilometerskilometers CIF-/IF-Module mapped;
194 micrometersmicrometers CIF-/IF-Module mapped;
195 gramsgrams CIF-/IF-Module mapped;
196 milligramsmilligrams CIF-/IF-Module mapped;
197 millilitersmilliliters CIF-/IF-Module mapped;
198 milliliters-per-secondmilliliters-per-second CIF-/IF-Module mapped;
199 decibelsdecibels CIF-/IF-Module mapped;
200 decibels-millivoltdecibels-millivolt CIF-/IF-Module mapped;
201 decibels-voltdecibels-volt CIF-/IF-Module mapped;
202 millisiemensmillisiemens CIF-/IF-Module mapped;
203 watt-hours-reactivewatt-hours-reactive CIF-/IF-Module mapped;
204 kilowatt-hours-reactivekilowatt-hours-reactive CIF-/IF-Module mapped;
205 megawatt-hours-reactivemegawatt-hours-reactive CIF-/IF-Module mapped;
206 millimeters-of-watermillimeters-of-water CIF-/IF-Module mapped;
207 per-milleper-mille CIF-/IF-Module mapped;
208 grams-per-gramgrams-per-gram CIF-/IF-Module mapped;
209 kilograms-per-kilogramkilograms-per-kilogram CIF-/IF-Module mapped;
210 grams-per-kilogramgrams-per-kilogram CIF-/IF-Module mapped;
211 milligrams-per-grammilligrams-per-gram CIF-/IF-Module mapped;
212 milligrams-per-kilogrammilligrams-per-kilogram CIF-/IF-Module mapped;
213 grams-per-millilitergrams-per-milliliter CIF-/IF-Module mapped;
214 grams-per-litergrams-per-liter CIF-/IF-Module mapped;
215 milligrams-per-litermilligrams-per-liter CIF-/IF-Module mapped;
216 micrograms-per-litermicrograms-per-liter CIF-/IF-Module mapped;
217 grams-per-cubic-metergrams-per-cubic-meter CIF-/IF-Module mapped;
218 milligrams-per-cubic-metermilligrams-per-cubic-meter CIF-/IF-Module mapped;
219 micrograms-per-cubic-metermicrograms-per-cubic-meter CIF-/IF-Module mapped;
220 nanograms-per-cubic-meternanograms-per-cubic-meter CIF-/IF-Module mapped;
221 grams-per-cubic-centimetergrams-per-cubic-centimeter CIF-/IF-Module mapped;
222 becquerelsbecquerels CIF-/IF-Module mapped;
223 kilobecquerelskilobecquerels CIF-/IF-Module mapped;
224 megabecquerelsmegabecquerels CIF-/IF-Module mapped;
225 graygray CIF-/IF-Module mapped;
226 milligraymilligray CIF-/IF-Module mapped;
227 micrograymicrogray CIF-/IF-Module mapped;
228 sievertssieverts CIF-/IF-Module mapped;
229 millisievertsmillisieverts CIF-/IF-Module mapped;
230 microsievertsmicrosieverts CIF-/IF-Module mapped;
231 microsieverts-per-hourmicrosieverts-per-hour CIF-/IF-Module mapped;
232 decibels-adecibels-a CIF-/IF-Module mapped;
233 nephelometric-turbidity-unitnephelometric-turbidity-unit CIF-/IF-Module mapped;
234 pHpH CIF-/IF-Module mapped;
235 grams-per-square-metergrams-per-square-meter CIF-/IF-Module mapped;
236 minutes-per-degree-kelvinminutes-per-degree-kelvin CIF-/IF-Module mapped;
237 meters-of-watermeters-of-water CIF-/IF-Module mapped;
238 timestamp-unixtimestamp-unix CIF-/IF-Module mapped;
239 m2 square-meterssquare-meters CIF-/IF-Module mapped;

This is the base signal. It contains the relative duty point of the device. The valid range is not necessarily 0…100 %. a duty point of 0 % is not necessarily linked to the OFF state of the device.Dieses Signal ist das Grundsignal. Es beinhaltet den relativen Arbeitspunkt für das Gerät. Der gültige Bereich ist nicht zwingend 0…100 %. Ein bestimmter Arbeitspunkt signalisiert nicht unbedingt den Ein/Aus Zustand des Gerätes.

Support referenceWird unterstützt durch:

CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;

6.2.13.2034 parameter set selector B

propertyEigenschaft valueWert
instance #Instanz-Nr. 2034
functionFunktion value after parameter set selector (B)Wert nach Parametersatz-Selektor (B)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 norm normal paremeter setParametersatz normal CIF-/IF-Module internal;
2 aux auxiliary parameter setParametersatz zusätzlich CIF-/IF-Module internal;
3 preset preset parameter set (startup/fallback)Parametersatz Preset (Voreinstellung / Fallback) CIF-/IF-Module internal;
5 INVALID value for parameter set invalidWert für Parametersatz ungültig CIF-/IF-Module internal;

This is the base signal. This signal contains information about the parameter set for device control. The parameter set constist of at least the duty point, the control mode, the on/off command and the signal source for the duty point.Dieses Signal ist das Grundsignal. Dieses Signal beinhaltet die Information über den Parametersatz zur Steuerung des Geräts: Der Parametersatz umfasst mindestens Sollwert, Regelungsart, Pumpe ein/aus und Sollwertquelle.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.14 Mutistate Outputs (MO)Multistate Ausgänge (MO)

instanceInstanz nameName
0 Bus Control Mode in
1 Bus Command Timer in,active
1 Bus Command Timer in
1 Bus Command Timer active
2 Current W/E Msg. Ackn. in
3 Setpoint Signal Source in
34 parameter set selector in
100 Control Function preset in,A
101 Setpoint Signal Source preset in,A
200 Control Function aux. in
203 Setpoint Signal Source aux. in

6.2.14.0 Bus Control Mode in

propertyEigenschaft valueWert
instance #Instanz-Nr. 0
relinquish defaultRelinquish Default 1
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 Gen_Spd This control mode operates the device with constant speed.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
2 CONST_FREQ reservedreserviert
3 CONST_POWER reservedreserviert
4 CONST_HEAD reservedreserviert
5 Gen_PConst This control mode operates the device with constant discharge pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Ausgangsdruck. MVIE, …;
6 Gen_PHdConst This control mode operates the device with constant differential pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
7 Gen_PHdVar This control mode operates the device with a differential pressure which varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
8 CONST_FLOW reservedreserviert
9 Gen_T This control mode operates the device with constant temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
10 Gen_TDiff This control mode operates the device with constant differential temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
11 CONST_LEV reservedreserviert
12 TEMP_VARIABLE This control mode operates the device with a differential pressure which varies with the fluid temperature.Diese Steuerungsart betreibt das Gerät mit mediumstemperaturabhängigem Differenzdruck (Δp-c=F(T)) . CIF-/IF-Module internal; Stratos;
13 Gen_UsrDfd This control mode operates the device with user configurable PID controller.Diese Steuerungsart betreibt das Gerät mit einem frei konfigurierbaren PID-Regler für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; IL_E, …; MVIE, …;
14 Gen_PVar This control mode operates the device with a discharge pressure that varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigen Ausgangsdruck. MVIE, …;
15 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;
16 HeatRadiator_PHd This control mode operates the device with a differential pressure which varies with the flow for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
17 HeatRadiator_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
18 HeatRadiator_T This control mode operates the device with constant temperature for heating radiator application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
19 HeatFloor_PHd This control mode operates the device with a differential pressure for floor heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
20 HeatFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
21 HeatFloor_T This control mode operates the device with constant temperature for floor heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
22 HeatCeiling_PHd This control mode operates the device with constant differential pressure for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
23 HeatCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
24 HeatCeiling_T This control mode operates the device with constant temperature for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
25 HeatFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
26 HeatFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
27 HeatFan_T This control mode operates the device with constant temperature for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
28 HeatB._T This control mode operates the device with constant temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
29 HeatB._TDiff This control mode operates the device with constant differential temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
30 HeatB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
31 HeatE._T This control mode operates the device with constant temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
32 HeatE._TDiff This control mode operates the device with constant differential temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
33 HeatE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
34 Heat_PHdConst This control mode operates the device with constant differential pressure for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
35 Heat_PHdVar This control mode operates the device with a differential pressure which varies with the flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
36 Heat_PHdExt This control mode operates the device with constant differential pressure for heating applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
37 Heat_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
38 Heat_VolFlow This control mode operates the device with constant volume flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
39 Heat_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
40 Heat_T This control mode operates the device with constant temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
41 Heat_TDiff This control mode operates the device with constant differential temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
42 Heat_Spd This control mode operates the device with constant speed for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
43 CoolCeiling_PHd This control mode operates the device with constant differential pressure for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
44 CoolCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
45 CoolCeiling_T This control mode operates the device with constant temperature for ceiling refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
46 CoolFloor_PHd This control mode operates the device with constant differential pressure for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
47 CoolFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
48 CoolFloor_T This control mode operates the device with constant temperature mode for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
49 CoolFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstronmabhängigem Differenzdruck für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
50 CoolFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
51 CoolFan_T This control mode operates the device with constant temperature mode for fan coil refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
52 CoolB._T This control mode operates the device with constant temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
53 CoolB._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
54 CoolB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
55 CoolE._T This control mode operates the device with constant temperature mode for refrigeration application with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungs-Anwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
56 CoolE._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
57 CoolE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with heat exhanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Wärmetauscher Stratos MAXO; Stratos GIGA 2.0;
58 Cool_PHdConst This control mode operates the device with constant differential pressure for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
59 Cool_PHdVar This control mode operates the device with a differential pressure which varies with the flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
60 Cool_PHdExt This control mode operates the device with constant differential pressure for refrigeration application with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
61 Cool_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
62 Cool_VolFlow This control mode operates the device with constant volume flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
63 Cool_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen Stratos MAXO; Stratos GIGA 2.0;
64 Cool_T This control mode operates the device with constant temperature mode for refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
65 Cool_TDiff This control mode operates the device with constant differential temperature for cooling application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
66 Cool_Spd This control mode operates the motor with constant speed for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
67 San_Circ._T This control mode operates the device with constant temperature for sanitary hot water circulation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Zirkulations-Anwendungen. Stratos MAXO;
68 SanW.Heat._TDiff This control mode operates the device with constant differential temperature for sanitary hot water application with heat exchanger in the storage tank.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen mit Wärmetauscher im Warmwasserspeicher Stratos MAXO; Stratos GIGA 2.0;
69 SanL.S._T reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
70 SanL.S._Acc.Flow reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
71 San_PHdConst This control mode operates the device with constant differential pressure for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
72 San_PHdVar This control mode operates the device with a differential pressure which varies with the flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
73 San_PHdExternal This control mode operates the device with constant differential pressure for sanitary hot water applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
74 San_VolFlow This control mode operates the device with constant volume flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
75 San_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Trink-Warmwasser-Anwendungen Stratos MAXO; Stratos GIGA 2.0;
76 San_T This control mode operates the device with constant temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
77 San_TDiff This control mode operates the device with constant differential temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
78 San_Spd This control mode operates the motor with constant speed for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
79 Gen_PHdExt This control mode operates the device with constant differential pressure for generic applications with external diffential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
80 Gen_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for generic applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
81 Gen_VolFlow This control mode operates the device with constant volume flow for generic applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
82 Gen_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for generic applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
83 ScndPHdConst This control mode operates the device with constant differential pressure. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
84 ScndPHdVar This control mode operates the device with a differential pressure which varies with the flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
85 ScndFlow This control mode operates the device with constant volume flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
86 ScndSpd This control mode operates the motor with constant speed. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
87 HeatConcrete_PHd This control mode operates the device with a differential pressure for concrete core activation heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
88 HeatConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
89 HeatConcrete_TDiff This control mode operates the device with constant differential temperature for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
90 HeatConcrete_Flow This control mode operates the device with constant volume flow for heating applications with concrete core activation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
91 HeatBottle_Flow This control mode operates the device with constant volume flow for heating applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
92 HeatMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
93 HeatMan_Flow This control mode operates the device with constant volume flow for heating applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
94 HeatTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with storage tank.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
95 HeatTank_Flow This control mode operates the device with constant volume flow for heating applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
96 HeatExchanger_Flow This control mode operates the device with constant volume flow for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
97 HeatSource_TDiff This control mode operates the device with constant differential temperature for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
98 HeatSource_Flow This control mode operates the device with constant volume flow for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
99 HeatDistrict_PHdConst This control mode operates the device with a differential pressure for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
100 HeatDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
101 HeatDistrict_PHdExt This control mode operates the device with constant differential pressure for district heating application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernwärme-Anwendungen. Stratos GIGA 2.0;
102 CoolConcrete_PHd This control mode operates the device with a differential pressure for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
103 CoolConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
104 CoolConcrete_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
105 CoolConcrete_Flow This control mode operates the device with constant volume flow for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
106 CoolBottle_Flow This control mode operates the device with constant volume flow for refrigeration applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
107 CoolMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
108 CoolMan_Flow This control mode operates the device with constant volume flow for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
109 CoolTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
110 CoolTank_Flow This control mode operates the device with constant volume flow for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
111 CoolExchanger_Flow This control mode operates the device with constant volume flow for refrigeration applications with heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
112 CoolCondenser_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with recirculating cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
113 CoolCondensor_Flow This control mode operates the device with constant volume flow for refrigeration applications with recirculationg cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
114 CoolDistrict_PHdConst This control mode operates the device with a differential pressure for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
115 CoolDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
116 CoolDistrict_PHdExt This control mode operates the device with constant differential pressure for district refrigeration application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernkühlungs-Anwendungen. Stratos GIGA 2.0;
117 108_RESERVED reserved for future use reserviert
118 109_RESERVED reserved for future use reserviert

This is the base signal. This signal represents the control mode for the device. In case a selected mode is not supported, the device will stay in the previously selected mode.Dieses Signal ist das Grundsignal. Dieses Signal beinhaltet die Steuerungsart für das Gerät. Wird eine gewählte Steuerungsart nicht unterstützt, bleibt das Gerät bei der zuletzt eingestellten Steuerungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.14.1 Bus Command Timer in,active

propertyEigenschaft valueWert
instance #Instanz-Nr. 1
relinquish defaultRelinquish Default 5
functionFunktion input value / active valueEingangswert / aktiver Wert
Module versionsModul-Versionen CIF-Module BACnet MS/TP (1.00…5.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 OFF The functionality Bus Command timer is deactivated. The local operation is blocked permanently.Die Funktion Bus Command Timer ist deaktiviert. Die lokale Pumpenbedienung ist dauernd gesperrt. CIF-/IF-Module internal;
2 SET This value starts a lockout time for the local pump operation. The lockout time may be adjustable.Dieser Wert startet eine Sperrzeit für die lokale Pumpenbedienung. Die Sperrzeit ist ggfs. einstellbar. CIF-/IF-Module internal;
3 ACTIVE This value indicates that the lockout time is active.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, derzeit läuft. CIF-/IF-Module internal;
4 RESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET" has elapsed. Local operation of the device is possible, the write to the device over the communication interface is blocked.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, abgelaufen ist. Die lokale Bedienung ist möglich, das Schreiben über die Kommunikationsschnittstelle ist gesperrt. CIF-/IF-Module internal;
5 MANUAL This value indicates that the local as well as the remote operation is possible. The commands are accepted according "last write wins".Dieser Wert zeigt an, dass sowohl die lokale Bedienung, als auch die Bedienung über die Kommunikationsverbindung möglich ist. Der letzte Befehl wird übernommen. CIF-/IF-Module internal;
6 SET_PRESET This value starts a lockout time for the local pump operation. After the lockout time has elapsed, PRESET values are used for operation. The lockout time may be adjustable.Dieser Wert startet eine Sperrzeit für die lokale Pumpenbedienung. Nach Ablauf der Sperrzeit werden voreingestellte Werte (PRESET) als Vorgabe gesetzt. Die Sperrzeit ist ggfs. einstellbar. CIF-/IF-Module internal;
7 ACTIVE_PRESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET_PRESET" is currently active. After the lockout time has elapsed, PRESET values are used for operation.Dieser Wert zeigt an, dass die Sperrzeit, welche mit dem Signal "Bus Command Timer SET" aktiviert wurde, derzeit läuft. Nach Ablauf der Sperrzeit werden voreingestellte Werte (PRESET) als Vorgabe gesetzt. CIF-/IF-Module internal;
8 RESET_PRESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET" has elapsed. Local operation of the device is possible, the write to the device over the communication link is blocked. When this signal becomes ative, PRESET values are set once for operation.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, abgelaufen ist. Die lokale Bedienung ist möglich, das Schreiben über das Kommunikationsinterface ist gesperrt. Sobald dises Signal aktiv wird, werden einmalig voreingestellte Werte (PRESET) als Vorgabe gesetzt. CIF-/IF-Module internal;
9 MANUAL_PRESET This value indicates that the local as well as the remote operation is possible. The commands are accepted according "last write wins". When this signal becomes active, PRESET values are loaded once.Dieser Wert zeigt an, dass sowohl die lokale Bedienung, als auch die Bedienung über die Kommunikationsverbindung möglich ist. Der letzte Befehl wird übernommen. Wenn dieser Wert aktiv wird, werden einmalig PRESET Werte als Vorgabe übernommen. CIF-/IF-Module internal;
10 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This is the base signal. When using an IF-Module the local menu may be disabled by factory setting. The local menu can be enabled permanently by writing the value MANUAL. To use the local menu only when the BAS system fails, repeate writing the value SET at least before the optional Bus Command Timer timeout time (default or fixed value 300 s). The activation is stored and survives a power on reset. When the mechanism is no longer needed, write OFF to reset to factory setting. If the BAS fails,Then the menu can be entered to adjust the settings. E50 may be displayed at the pump. If it is desired to load fallback values when the bus failure event occures, then use SET_PRESET instead of SET to trigger the bus command timer. This functionality is available with Modbus and BACnet in IF-modules starting with firmware SW > 2.00. For CIF-modules, there is no restriction.Dieses Signal ist das Grundsignal. Wenn ein IF-Modul benutzt wird, ist in der Werkseinstellung das Menü der Pumpe ggfs. verriegelt. Beim Wert MANUAL ist das Menü dauerhaft freigegeben. Um das lokale Menü nur bei Feldbus-Ausfall zu öffen, schreiben Sie den Wert SET immer innerhalb der optional verfügbaren Bus Command Timer timeout Zeit (default bzw. fester Wert von 300 s). Die Aktivierung wird gespeichert und überlebt einen Spannungsreset. Wenn der Mechanismus nicht mehr benötigt wird, schreiben Sie OFF, um zur Werkseinstellung zurückzukehren. Wenn der Bus Command Timer abläuft, wird ggfs. E54 im Display angezeigt. Dann können im Menü Einstellungen vorgenommen werden. Um bei einem Bus-Ausfall nicht nur die lokale Bedienung zu erlauben, sondern auch Rückfall- (Fallback) Werte zu laden, schreiben Sie statt SET SET_PRESET. Die Fallback-Werte sind in separaten Datenpunkten realisiert und haben "PRESET" im Namen. Diese Funktion ist bei IF-Modulen erst ab SW > 2.00 realisiert, bei CIF-Modulen ist sie immer vorhanden.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.14.1 Bus Command Timer in

propertyEigenschaft valueWert
instance #Instanz-Nr. 1
relinquish defaultRelinquish Default 5
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 OFF The functionality Bus Command timer is deactivated. The local operation is blocked permanently.Die Funktion Bus Command Timer ist deaktiviert. Die lokale Pumpenbedienung ist dauernd gesperrt. CIF-/IF-Module internal;
2 SET This value starts a lockout time for the local pump operation. The lockout time may be adjustable.Dieser Wert startet eine Sperrzeit für die lokale Pumpenbedienung. Die Sperrzeit ist ggfs. einstellbar. CIF-/IF-Module internal;
3 ACTIVE This value indicates that the lockout time is active.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, derzeit läuft. CIF-/IF-Module internal;
4 RESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET" has elapsed. Local operation of the device is possible, the write to the device over the communication interface is blocked.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, abgelaufen ist. Die lokale Bedienung ist möglich, das Schreiben über die Kommunikationsschnittstelle ist gesperrt. CIF-/IF-Module internal;
5 MANUAL This value indicates that the local as well as the remote operation is possible. The commands are accepted according "last write wins".Dieser Wert zeigt an, dass sowohl die lokale Bedienung, als auch die Bedienung über die Kommunikationsverbindung möglich ist. Der letzte Befehl wird übernommen. CIF-/IF-Module internal;
6 SET_PRESET This value starts a lockout time for the local pump operation. After the lockout time has elapsed, PRESET values are used for operation. The lockout time may be adjustable.Dieser Wert startet eine Sperrzeit für die lokale Pumpenbedienung. Nach Ablauf der Sperrzeit werden voreingestellte Werte (PRESET) als Vorgabe gesetzt. Die Sperrzeit ist ggfs. einstellbar. CIF-/IF-Module internal;
7 ACTIVE_PRESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET_PRESET" is currently active. After the lockout time has elapsed, PRESET values are used for operation.Dieser Wert zeigt an, dass die Sperrzeit, welche mit dem Signal "Bus Command Timer SET" aktiviert wurde, derzeit läuft. Nach Ablauf der Sperrzeit werden voreingestellte Werte (PRESET) als Vorgabe gesetzt. CIF-/IF-Module internal;
8 RESET_PRESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET" has elapsed. Local operation of the device is possible, the write to the device over the communication link is blocked. When this signal becomes ative, PRESET values are set once for operation.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, abgelaufen ist. Die lokale Bedienung ist möglich, das Schreiben über das Kommunikationsinterface ist gesperrt. Sobald dises Signal aktiv wird, werden einmalig voreingestellte Werte (PRESET) als Vorgabe gesetzt. CIF-/IF-Module internal;
9 MANUAL_PRESET This value indicates that the local as well as the remote operation is possible. The commands are accepted according "last write wins". When this signal becomes active, PRESET values are loaded once.Dieser Wert zeigt an, dass sowohl die lokale Bedienung, als auch die Bedienung über die Kommunikationsverbindung möglich ist. Der letzte Befehl wird übernommen. Wenn dieser Wert aktiv wird, werden einmalig PRESET Werte als Vorgabe übernommen. CIF-/IF-Module internal;
10 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This is the base signal. When using an IF-Module the local menu may be disabled by factory setting. The local menu can be enabled permanently by writing the value MANUAL. To use the local menu only when the BAS system fails, repeate writing the value SET at least before the optional Bus Command Timer timeout time (default or fixed value 300 s). The activation is stored and survives a power on reset. When the mechanism is no longer needed, write OFF to reset to factory setting. If the BAS fails,Then the menu can be entered to adjust the settings. E50 may be displayed at the pump. If it is desired to load fallback values when the bus failure event occures, then use SET_PRESET instead of SET to trigger the bus command timer. This functionality is available with Modbus and BACnet in IF-modules starting with firmware SW > 2.00. For CIF-modules, there is no restriction.Dieses Signal ist das Grundsignal. Wenn ein IF-Modul benutzt wird, ist in der Werkseinstellung das Menü der Pumpe ggfs. verriegelt. Beim Wert MANUAL ist das Menü dauerhaft freigegeben. Um das lokale Menü nur bei Feldbus-Ausfall zu öffen, schreiben Sie den Wert SET immer innerhalb der optional verfügbaren Bus Command Timer timeout Zeit (default bzw. fester Wert von 300 s). Die Aktivierung wird gespeichert und überlebt einen Spannungsreset. Wenn der Mechanismus nicht mehr benötigt wird, schreiben Sie OFF, um zur Werkseinstellung zurückzukehren. Wenn der Bus Command Timer abläuft, wird ggfs. E54 im Display angezeigt. Dann können im Menü Einstellungen vorgenommen werden. Um bei einem Bus-Ausfall nicht nur die lokale Bedienung zu erlauben, sondern auch Rückfall- (Fallback) Werte zu laden, schreiben Sie statt SET SET_PRESET. Die Fallback-Werte sind in separaten Datenpunkten realisiert und haben "PRESET" im Namen. Diese Funktion ist bei IF-Modulen erst ab SW > 2.00 realisiert, bei CIF-Modulen ist sie immer vorhanden.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.14.1 Bus Command Timer active

propertyEigenschaft valueWert
instance #Instanz-Nr. 1
propertyProperty 104
relinquish defaultRelinquish Default 5
functionFunktion active valueaktiver Wert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 OFF The functionality Bus Command timer is deactivated. The local operation is blocked permanently.Die Funktion Bus Command Timer ist deaktiviert. Die lokale Pumpenbedienung ist dauernd gesperrt. CIF-/IF-Module internal;
2 SET This value starts a lockout time for the local pump operation. The lockout time may be adjustable.Dieser Wert startet eine Sperrzeit für die lokale Pumpenbedienung. Die Sperrzeit ist ggfs. einstellbar. CIF-/IF-Module internal;
3 ACTIVE This value indicates that the lockout time is active.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, derzeit läuft. CIF-/IF-Module internal;
4 RESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET" has elapsed. Local operation of the device is possible, the write to the device over the communication interface is blocked.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, abgelaufen ist. Die lokale Bedienung ist möglich, das Schreiben über die Kommunikationsschnittstelle ist gesperrt. CIF-/IF-Module internal;
5 MANUAL This value indicates that the local as well as the remote operation is possible. The commands are accepted according "last write wins".Dieser Wert zeigt an, dass sowohl die lokale Bedienung, als auch die Bedienung über die Kommunikationsverbindung möglich ist. Der letzte Befehl wird übernommen. CIF-/IF-Module internal;
6 SET_PRESET This value starts a lockout time for the local pump operation. After the lockout time has elapsed, PRESET values are used for operation. The lockout time may be adjustable.Dieser Wert startet eine Sperrzeit für die lokale Pumpenbedienung. Nach Ablauf der Sperrzeit werden voreingestellte Werte (PRESET) als Vorgabe gesetzt. Die Sperrzeit ist ggfs. einstellbar. CIF-/IF-Module internal;
7 ACTIVE_PRESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET_PRESET" is currently active. After the lockout time has elapsed, PRESET values are used for operation.Dieser Wert zeigt an, dass die Sperrzeit, welche mit dem Signal "Bus Command Timer SET" aktiviert wurde, derzeit läuft. Nach Ablauf der Sperrzeit werden voreingestellte Werte (PRESET) als Vorgabe gesetzt. CIF-/IF-Module internal;
8 RESET_PRESET This value indicates that the lockout time which was started with the signal "Bus Command Timer SET" has elapsed. Local operation of the device is possible, the write to the device over the communication link is blocked. When this signal becomes ative, PRESET values are set once for operation.Dieser Wert zeigt an, dass die Sperrzeit, die mit dem Signal "Bus Command Timer SET" aktiviert wurde, abgelaufen ist. Die lokale Bedienung ist möglich, das Schreiben über das Kommunikationsinterface ist gesperrt. Sobald dises Signal aktiv wird, werden einmalig voreingestellte Werte (PRESET) als Vorgabe gesetzt. CIF-/IF-Module internal;
9 MANUAL_PRESET This value indicates that the local as well as the remote operation is possible. The commands are accepted according "last write wins". When this signal becomes active, PRESET values are loaded once.Dieser Wert zeigt an, dass sowohl die lokale Bedienung, als auch die Bedienung über die Kommunikationsverbindung möglich ist. Der letzte Befehl wird übernommen. Wenn dieser Wert aktiv wird, werden einmalig PRESET Werte als Vorgabe übernommen. CIF-/IF-Module internal;
10 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This is the base signal. When using an IF-Module the local menu may be disabled by factory setting. The local menu can be enabled permanently by writing the value MANUAL. To use the local menu only when the BAS system fails, repeate writing the value SET at least before the optional Bus Command Timer timeout time (default or fixed value 300 s). The activation is stored and survives a power on reset. When the mechanism is no longer needed, write OFF to reset to factory setting. If the BAS fails,Then the menu can be entered to adjust the settings. E50 may be displayed at the pump. If it is desired to load fallback values when the bus failure event occures, then use SET_PRESET instead of SET to trigger the bus command timer. This functionality is available with Modbus and BACnet in IF-modules starting with firmware SW > 2.00. For CIF-modules, there is no restriction.Dieses Signal ist das Grundsignal. Wenn ein IF-Modul benutzt wird, ist in der Werkseinstellung das Menü der Pumpe ggfs. verriegelt. Beim Wert MANUAL ist das Menü dauerhaft freigegeben. Um das lokale Menü nur bei Feldbus-Ausfall zu öffen, schreiben Sie den Wert SET immer innerhalb der optional verfügbaren Bus Command Timer timeout Zeit (default bzw. fester Wert von 300 s). Die Aktivierung wird gespeichert und überlebt einen Spannungsreset. Wenn der Mechanismus nicht mehr benötigt wird, schreiben Sie OFF, um zur Werkseinstellung zurückzukehren. Wenn der Bus Command Timer abläuft, wird ggfs. E54 im Display angezeigt. Dann können im Menü Einstellungen vorgenommen werden. Um bei einem Bus-Ausfall nicht nur die lokale Bedienung zu erlauben, sondern auch Rückfall- (Fallback) Werte zu laden, schreiben Sie statt SET SET_PRESET. Die Fallback-Werte sind in separaten Datenpunkten realisiert und haben "PRESET" im Namen. Diese Funktion ist bei IF-Modulen erst ab SW > 2.00 realisiert, bei CIF-Modulen ist sie immer vorhanden.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.14.2 Current W/E Msg. Ackn. in

propertyEigenschaft valueWert
instance #Instanz-Nr. 2
relinquish defaultRelinquish Default 1
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 OFF CIF-/IF-Module internal;
2 ACK CIF-/IF-Module internal;
3 ACKed CIF-/IF-Module internal;

This is the base signal. Reserverd for acknowledgement of the current warning or error.Dieses Signal ist das Grundsignal. Reserviert für die Bestätigung des aktuellen Fehlers / der aktuellen Warnung.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.14.3 Setpoint Signal Source in

propertyEigenschaft valueWert
instance #Instanz-Nr. 3
relinquish defaultRelinquish Default 1
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 IF-Module Signal source for setpoint: IF-ModuleSollwertquelle IF-Modul Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;
2 0…10 V Signal source for setpoint: IN2 mode 0…10 VSollwertquelle: IN2 Modus 0…10 V CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
3 2…10 V Signal source for setpoint: IN2 mode 2…10 VSollwertquelle: IN2 Modus 2…10 V CIF-/IF-Module mapped; IL_E, …; MVIE, …;
4 0…20 mA Signal source for setpoint: IN2 mode 0…20 mASollwertquelle: IN2 Modus 0…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
5 4…20 mA Signal source for setpoint: IN2 mode 4…20 mASollwertquelle: IN2 Modus 4…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
6 Internal Signal source for setpoint: internalSollwertquelle: Intern Stratos MAXO; Stratos GIGA 2.0;
7 EXT 1 Signal source for setpoint: EXT 1Sollwertquelle: EXT 1 Stratos MAXO; Stratos GIGA 2.0;
8 EXT 2 Signal source for setpoint: EXT 2Sollwertquelle: EXT 2 Stratos MAXO; Stratos GIGA 2.0;
9 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This is the base signal. This signal represents the source for the setpoint for the current control function.Dieses Signal ist das Grundsignal. Dieses Signal enthält die Sollwertquelle in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.14.34 parameter set selector in

propertyEigenschaft valueWert
instance #Instanz-Nr. 34
relinquish defaultRelinquish Default 1
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 norm normal paremeter setParametersatz normal CIF-/IF-Module internal;
2 aux auxiliary parameter setParametersatz zusätzlich CIF-/IF-Module internal;
3 preset preset parameter set (startup/fallback)Parametersatz Preset (Voreinstellung / Fallback) CIF-/IF-Module internal;
5 INVALID value for parameter set invalidWert für Parametersatz ungültig CIF-/IF-Module internal;

This is the base signal. This signal contains information about the parameter set for device control. The parameter set constist of at least the duty point, the control mode, the on/off command and the signal source for the duty point.Dieses Signal ist das Grundsignal. Dieses Signal beinhaltet die Information über den Parametersatz zur Steuerung des Geräts: Der Parametersatz umfasst mindestens Sollwert, Regelungsart, Pumpe ein/aus und Sollwertquelle.

Support referenceWird unterstützt durch:

CIF-/IF-Module internal;

6.2.14.100 Control Function preset in,A

propertyEigenschaft valueWert
instance #Instanz-Nr. 100
relinquish defaultRelinquish Default 1
functionFunktion input value / readback input value (A)Eingangswert / Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 Gen_Spd This control mode operates the device with constant speed.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
2 CONST_FREQ reservedreserviert
3 CONST_POWER reservedreserviert
4 CONST_HEAD reservedreserviert
5 Gen_PConst This control mode operates the device with constant discharge pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Ausgangsdruck. MVIE, …;
6 Gen_PHdConst This control mode operates the device with constant differential pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
7 Gen_PHdVar This control mode operates the device with a differential pressure which varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
8 CONST_FLOW reservedreserviert
9 Gen_T This control mode operates the device with constant temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
10 Gen_TDiff This control mode operates the device with constant differential temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
11 CONST_LEV reservedreserviert
12 TEMP_VARIABLE This control mode operates the device with a differential pressure which varies with the fluid temperature.Diese Steuerungsart betreibt das Gerät mit mediumstemperaturabhängigem Differenzdruck (Δp-c=F(T)) . CIF-/IF-Module internal; Stratos;
13 Gen_UsrDfd This control mode operates the device with user configurable PID controller.Diese Steuerungsart betreibt das Gerät mit einem frei konfigurierbaren PID-Regler für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; IL_E, …; MVIE, …;
14 Gen_PVar This control mode operates the device with a discharge pressure that varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigen Ausgangsdruck. MVIE, …;
15 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;
16 HeatRadiator_PHd This control mode operates the device with a differential pressure which varies with the flow for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
17 HeatRadiator_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
18 HeatRadiator_T This control mode operates the device with constant temperature for heating radiator application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
19 HeatFloor_PHd This control mode operates the device with a differential pressure for floor heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
20 HeatFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
21 HeatFloor_T This control mode operates the device with constant temperature for floor heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
22 HeatCeiling_PHd This control mode operates the device with constant differential pressure for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
23 HeatCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
24 HeatCeiling_T This control mode operates the device with constant temperature for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
25 HeatFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
26 HeatFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
27 HeatFan_T This control mode operates the device with constant temperature for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
28 HeatB._T This control mode operates the device with constant temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
29 HeatB._TDiff This control mode operates the device with constant differential temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
30 HeatB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
31 HeatE._T This control mode operates the device with constant temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
32 HeatE._TDiff This control mode operates the device with constant differential temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
33 HeatE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
34 Heat_PHdConst This control mode operates the device with constant differential pressure for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
35 Heat_PHdVar This control mode operates the device with a differential pressure which varies with the flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
36 Heat_PHdExt This control mode operates the device with constant differential pressure for heating applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
37 Heat_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
38 Heat_VolFlow This control mode operates the device with constant volume flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
39 Heat_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
40 Heat_T This control mode operates the device with constant temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
41 Heat_TDiff This control mode operates the device with constant differential temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
42 Heat_Spd This control mode operates the device with constant speed for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
43 CoolCeiling_PHd This control mode operates the device with constant differential pressure for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
44 CoolCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
45 CoolCeiling_T This control mode operates the device with constant temperature for ceiling refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
46 CoolFloor_PHd This control mode operates the device with constant differential pressure for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
47 CoolFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
48 CoolFloor_T This control mode operates the device with constant temperature mode for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
49 CoolFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstronmabhängigem Differenzdruck für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
50 CoolFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
51 CoolFan_T This control mode operates the device with constant temperature mode for fan coil refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
52 CoolB._T This control mode operates the device with constant temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
53 CoolB._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
54 CoolB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
55 CoolE._T This control mode operates the device with constant temperature mode for refrigeration application with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungs-Anwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
56 CoolE._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
57 CoolE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with heat exhanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Wärmetauscher Stratos MAXO; Stratos GIGA 2.0;
58 Cool_PHdConst This control mode operates the device with constant differential pressure for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
59 Cool_PHdVar This control mode operates the device with a differential pressure which varies with the flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
60 Cool_PHdExt This control mode operates the device with constant differential pressure for refrigeration application with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
61 Cool_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
62 Cool_VolFlow This control mode operates the device with constant volume flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
63 Cool_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen Stratos MAXO; Stratos GIGA 2.0;
64 Cool_T This control mode operates the device with constant temperature mode for refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
65 Cool_TDiff This control mode operates the device with constant differential temperature for cooling application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
66 Cool_Spd This control mode operates the motor with constant speed for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
67 San_Circ._T This control mode operates the device with constant temperature for sanitary hot water circulation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Zirkulations-Anwendungen. Stratos MAXO;
68 SanW.Heat._TDiff This control mode operates the device with constant differential temperature for sanitary hot water application with heat exchanger in the storage tank.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen mit Wärmetauscher im Warmwasserspeicher Stratos MAXO; Stratos GIGA 2.0;
69 SanL.S._T reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
70 SanL.S._Acc.Flow reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
71 San_PHdConst This control mode operates the device with constant differential pressure for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
72 San_PHdVar This control mode operates the device with a differential pressure which varies with the flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
73 San_PHdExternal This control mode operates the device with constant differential pressure for sanitary hot water applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
74 San_VolFlow This control mode operates the device with constant volume flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
75 San_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Trink-Warmwasser-Anwendungen Stratos MAXO; Stratos GIGA 2.0;
76 San_T This control mode operates the device with constant temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
77 San_TDiff This control mode operates the device with constant differential temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
78 San_Spd This control mode operates the motor with constant speed for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
79 Gen_PHdExt This control mode operates the device with constant differential pressure for generic applications with external diffential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
80 Gen_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for generic applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
81 Gen_VolFlow This control mode operates the device with constant volume flow for generic applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
82 Gen_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for generic applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
83 ScndPHdConst This control mode operates the device with constant differential pressure. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
84 ScndPHdVar This control mode operates the device with a differential pressure which varies with the flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
85 ScndFlow This control mode operates the device with constant volume flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
86 ScndSpd This control mode operates the motor with constant speed. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
87 HeatConcrete_PHd This control mode operates the device with a differential pressure for concrete core activation heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
88 HeatConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
89 HeatConcrete_TDiff This control mode operates the device with constant differential temperature for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
90 HeatConcrete_Flow This control mode operates the device with constant volume flow for heating applications with concrete core activation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
91 HeatBottle_Flow This control mode operates the device with constant volume flow for heating applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
92 HeatMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
93 HeatMan_Flow This control mode operates the device with constant volume flow for heating applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
94 HeatTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with storage tank.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
95 HeatTank_Flow This control mode operates the device with constant volume flow for heating applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
96 HeatExchanger_Flow This control mode operates the device with constant volume flow for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
97 HeatSource_TDiff This control mode operates the device with constant differential temperature for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
98 HeatSource_Flow This control mode operates the device with constant volume flow for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
99 HeatDistrict_PHdConst This control mode operates the device with a differential pressure for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
100 HeatDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
101 HeatDistrict_PHdExt This control mode operates the device with constant differential pressure for district heating application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernwärme-Anwendungen. Stratos GIGA 2.0;
102 CoolConcrete_PHd This control mode operates the device with a differential pressure for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
103 CoolConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
104 CoolConcrete_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
105 CoolConcrete_Flow This control mode operates the device with constant volume flow for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
106 CoolBottle_Flow This control mode operates the device with constant volume flow for refrigeration applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
107 CoolMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
108 CoolMan_Flow This control mode operates the device with constant volume flow for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
109 CoolTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
110 CoolTank_Flow This control mode operates the device with constant volume flow for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
111 CoolExchanger_Flow This control mode operates the device with constant volume flow for refrigeration applications with heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
112 CoolCondenser_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with recirculating cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
113 CoolCondensor_Flow This control mode operates the device with constant volume flow for refrigeration applications with recirculationg cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
114 CoolDistrict_PHdConst This control mode operates the device with a differential pressure for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
115 CoolDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
116 CoolDistrict_PHdExt This control mode operates the device with constant differential pressure for district refrigeration application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernkühlungs-Anwendungen. Stratos GIGA 2.0;
117 108_RESERVED reserved for future use reserviert
118 109_RESERVED reserved for future use reserviert

This incorporates a preset or fallback function for the following signal. This signal represents the control mode for the device. In case a selected mode is not supported, the device will stay in the previously selected mode.Dies beinhaltet eine Voreinstellung für das folgende Signal. Dieses Signal beinhaltet die Steuerungsart für das Gerät. Wird eine gewählte Steuerungsart nicht unterstützt, bleibt das Gerät bei der zuletzt eingestellten Steuerungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.14.101 Setpoint Signal Source preset in,A

propertyEigenschaft valueWert
instance #Instanz-Nr. 101
relinquish defaultRelinquish Default 1
functionFunktion input value / readback input value (A)Eingangswert / Rücklesewert Eingang (A)
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (1.00…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 IF-Module Signal source for setpoint: IF-ModuleSollwertquelle IF-Modul Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;
2 0…10 V Signal source for setpoint: IN2 mode 0…10 VSollwertquelle: IN2 Modus 0…10 V CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
3 2…10 V Signal source for setpoint: IN2 mode 2…10 VSollwertquelle: IN2 Modus 2…10 V CIF-/IF-Module mapped; IL_E, …; MVIE, …;
4 0…20 mA Signal source for setpoint: IN2 mode 0…20 mASollwertquelle: IN2 Modus 0…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
5 4…20 mA Signal source for setpoint: IN2 mode 4…20 mASollwertquelle: IN2 Modus 4…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
6 Internal Signal source for setpoint: internalSollwertquelle: Intern Stratos MAXO; Stratos GIGA 2.0;
7 EXT 1 Signal source for setpoint: EXT 1Sollwertquelle: EXT 1 Stratos MAXO; Stratos GIGA 2.0;
8 EXT 2 Signal source for setpoint: EXT 2Sollwertquelle: EXT 2 Stratos MAXO; Stratos GIGA 2.0;
9 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This incorporates a preset or fallback function for the following signal. This signal represents the source for the setpoint for the current control function.Dies beinhaltet eine Voreinstellung für das folgende Signal. Dieses Signal enthält die Sollwertquelle in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.14.200 Control Function aux. in

propertyEigenschaft valueWert
instance #Instanz-Nr. 200
relinquish defaultRelinquish Default 1
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 Gen_Spd This control mode operates the device with constant speed.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
2 CONST_FREQ reservedreserviert
3 CONST_POWER reservedreserviert
4 CONST_HEAD reservedreserviert
5 Gen_PConst This control mode operates the device with constant discharge pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Ausgangsdruck. MVIE, …;
6 Gen_PHdConst This control mode operates the device with constant differential pressure.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
7 Gen_PHdVar This control mode operates the device with a differential pressure which varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …;
8 CONST_FLOW reservedreserviert
9 Gen_T This control mode operates the device with constant temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
10 Gen_TDiff This control mode operates the device with constant differential temperature for generic application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
11 CONST_LEV reservedreserviert
12 TEMP_VARIABLE This control mode operates the device with a differential pressure which varies with the fluid temperature.Diese Steuerungsart betreibt das Gerät mit mediumstemperaturabhängigem Differenzdruck (Δp-c=F(T)) . CIF-/IF-Module internal; Stratos;
13 Gen_UsrDfd This control mode operates the device with user configurable PID controller.Diese Steuerungsart betreibt das Gerät mit einem frei konfigurierbaren PID-Regler für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0; IL_E, …; MVIE, …;
14 Gen_PVar This control mode operates the device with a discharge pressure that varies with the flow.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigen Ausgangsdruck. MVIE, …;
15 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;
16 HeatRadiator_PHd This control mode operates the device with a differential pressure which varies with the flow for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
17 HeatRadiator_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating radiator applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
18 HeatRadiator_T This control mode operates the device with constant temperature for heating radiator application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizkörperanwendungen. Stratos MAXO; Stratos GIGA 2.0;
19 HeatFloor_PHd This control mode operates the device with a differential pressure for floor heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
20 HeatFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
21 HeatFloor_T This control mode operates the device with constant temperature for floor heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
22 HeatCeiling_PHd This control mode operates the device with constant differential pressure for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
23 HeatCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
24 HeatCeiling_T This control mode operates the device with constant temperature for ceiling heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenheizungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
25 HeatFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
26 HeatFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
27 HeatFan_T This control mode operates the device with constant temperature for fan coil heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
28 HeatB._T This control mode operates the device with constant temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
29 HeatB._TDiff This control mode operates the device with constant differential temperature for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
30 HeatB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
31 HeatE._T This control mode operates the device with constant temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
32 HeatE._TDiff This control mode operates the device with constant differential temperature for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
33 HeatE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
34 Heat_PHdConst This control mode operates the device with constant differential pressure for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
35 Heat_PHdVar This control mode operates the device with a differential pressure which varies with the flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
36 Heat_PHdExt This control mode operates the device with constant differential pressure for heating applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
37 Heat_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
38 Heat_VolFlow This control mode operates the device with constant volume flow for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
39 Heat_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
40 Heat_T This control mode operates the device with constant temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
41 Heat_TDiff This control mode operates the device with constant differential temperature for heating application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
42 Heat_Spd This control mode operates the device with constant speed for heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Heizungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
43 CoolCeiling_PHd This control mode operates the device with constant differential pressure for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
44 CoolCeiling_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for ceiling refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
45 CoolCeiling_T This control mode operates the device with constant temperature for ceiling refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Deckenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
46 CoolFloor_PHd This control mode operates the device with constant differential pressure for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
47 CoolFloor_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
48 CoolFloor_T This control mode operates the device with constant temperature mode for floor refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Fußbodenkühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
49 CoolFan_PHd This control mode operates the device with a differential pressure which varies with the flow for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstronmabhängigem Differenzdruck für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
50 CoolFan_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for fan coil refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
51 CoolFan_T This control mode operates the device with constant temperature mode for fan coil refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit Gebläsekonvektor. Stratos MAXO; Stratos GIGA 2.0;
52 CoolB._T This control mode operates the device with constant temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
53 CoolB._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
54 CoolB._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with hydraulic separator.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit hydraulischer Weiche. Stratos MAXO; Stratos GIGA 2.0;
55 CoolE._T This control mode operates the device with constant temperature mode for refrigeration application with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühlungs-Anwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
56 CoolE._TDiff This control mode operates the device with constant differential temperature for refrigeration applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Wärmetauscher. Stratos MAXO; Stratos GIGA 2.0;
57 CoolE._Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with heat exhanger.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Wärmetauscher Stratos MAXO; Stratos GIGA 2.0;
58 Cool_PHdConst This control mode operates the device with constant differential pressure for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
59 Cool_PHdVar This control mode operates the device with a differential pressure which varies with the flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
60 Cool_PHdExt This control mode operates the device with constant differential pressure for refrigeration application with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Kühlungs-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
61 Cool_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
62 Cool_VolFlow This control mode operates the device with constant volume flow for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
63 Cool_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen Stratos MAXO; Stratos GIGA 2.0;
64 Cool_T This control mode operates the device with constant temperature mode for refrigeration application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Kühl-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
65 Cool_TDiff This control mode operates the device with constant differential temperature for cooling application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
66 Cool_Spd This control mode operates the motor with constant speed for refrigeration applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Kühlungsanwendungen. Stratos MAXO; Stratos GIGA 2.0;
67 San_Circ._T This control mode operates the device with constant temperature for sanitary hot water circulation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Zirkulations-Anwendungen. Stratos MAXO;
68 SanW.Heat._TDiff This control mode operates the device with constant differential temperature for sanitary hot water application with heat exchanger in the storage tank.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen mit Wärmetauscher im Warmwasserspeicher Stratos MAXO; Stratos GIGA 2.0;
69 SanL.S._T reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
70 SanL.S._Acc.Flow reservedreserviert Stratos MAXO; Stratos GIGA 2.0;
71 San_PHdConst This control mode operates the device with constant differential pressure for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
72 San_PHdVar This control mode operates the device with a differential pressure which varies with the flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Trink-Warmwasser-Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
73 San_PHdExternal This control mode operates the device with constant differential pressure for sanitary hot water applications with external differential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
74 San_VolFlow This control mode operates the device with constant volume flow for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
75 San_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Trink-Warmwasser-Anwendungen Stratos MAXO; Stratos GIGA 2.0;
76 San_T This control mode operates the device with constant temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Temperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
77 San_TDiff This control mode operates the device with constant differential temperature for sanitary hot water application.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
78 San_Spd This control mode operates the motor with constant speed for sanitary hot water applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl für Trink-Warmwasser Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
79 Gen_PHdExt This control mode operates the device with constant differential pressure for generic applications with external diffential pressure sensor.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
80 Gen_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for generic applications.Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
81 Gen_VolFlow This control mode operates the device with constant volume flow for generic applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
82 Gen_Acc.Flow This control mode operates the device with a setpoint depending on the volume flow of other pumps for generic applications.Diese Steuerungsart betreibt das Gerät mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für generische Anwendungen. Stratos MAXO; Stratos GIGA 2.0;
83 ScndPHdConst This control mode operates the device with constant differential pressure. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
84 ScndPHdVar This control mode operates the device with a differential pressure which varies with the flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
85 ScndFlow This control mode operates the device with constant volume flow. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
86 ScndSpd This control mode operates the motor with constant speed. A special parameter set which is stored in the device is used.Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Drehzahl. Hierfür wird ein separater Parametersatz verwendet, der in der Pumpe gespeichert ist. Stratos MAXO; Stratos GIGA 2.0;
87 HeatConcrete_PHd This control mode operates the device with a differential pressure for concrete core activation heating applications.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
88 HeatConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
89 HeatConcrete_TDiff This control mode operates the device with constant differential temperature for heating applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
90 HeatConcrete_Flow This control mode operates the device with constant volume flow for heating applications with concrete core activation.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
91 HeatBottle_Flow This control mode operates the device with constant volume flow for heating applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
92 HeatMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
93 HeatMan_Flow This control mode operates the device with constant volume flow for heating applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
94 HeatTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for heating applications with storage tank.Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
95 HeatTank_Flow This control mode operates the device with constant volume flow for heating applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
96 HeatExchanger_Flow This control mode operates the device with constant volume flow for heating applications with heat exchanger.Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
97 HeatSource_TDiff This control mode operates the device with constant differential temperature for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
98 HeatSource_Flow This control mode operates the device with constant volume flow for heating applications with ground coupled heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Heizungsanwendungen mit Erdwärmesonde. Stratos GIGA 2.0;
99 HeatDistrict_PHdConst This control mode operates the device with a differential pressure for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
100 HeatDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district heating applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernheizungsanwendungen. Stratos GIGA 2.0;
101 HeatDistrict_PHdExt This control mode operates the device with constant differential pressure for district heating application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernwärme-Anwendungen. Stratos GIGA 2.0;
102 CoolConcrete_PHd This control mode operates the device with a differential pressure for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Heizungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
103 CoolConcrete_DA This control mode operates the device with automatic setpoint adjustement (dynamic adapt) for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit automatischer Sollwertanpassung (Dynamic Adapt) für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
104 CoolConcrete_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
105 CoolConcrete_Flow This control mode operates the device with constant volume flow for refrigeration applications with concrete core activation. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Betonkernaktivierung. Stratos GIGA 2.0;
106 CoolBottle_Flow This control mode operates the device with constant volume flow for refrigeration applications with hydraulic separator. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
107 CoolMan_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
108 CoolMan_Flow This control mode operates the device with constant volume flow for refrigeration applications with manifold. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Verteilerbalken. Stratos GIGA 2.0;
109 CoolTank_MFA This control mode operates the device with a setpoint depending on the volume flow of other pumps for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät in mit einem vom Durchfluß anderer Pumpen abhängigen Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
110 CoolTank_Flow This control mode operates the device with constant volume flow for refrigeration applications with storage tank. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Pufferspeicher. Stratos GIGA 2.0;
111 CoolExchanger_Flow This control mode operates the device with constant volume flow for refrigeration applications with heat exchanger. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Wärmetauscher. Stratos GIGA 2.0;
112 CoolCondenser_TDiff This control mode operates the device with constant differential temperature for refrigeration applications with recirculating cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängiger Differenztemperatur für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
113 CoolCondensor_Flow This control mode operates the device with constant volume flow for refrigeration applications with recirculationg cooler. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Durchfluß für Kühlungsanwendungen mit Rückkühler. Stratos GIGA 2.0;
114 CoolDistrict_PHdConst This control mode operates the device with a differential pressure for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
115 CoolDistrict_PHdVar This control mode operates the device with a differential pressure which varies with the flow for district refrigeration applications. Diese Steuerungsart betreibt das Gerät mit sollwert- und volumenstromabhängigem Differenzdruck für Fernkühlungsanwendungen. Stratos GIGA 2.0;
116 CoolDistrict_PHdExt This control mode operates the device with constant differential pressure for district refrigeration application with external differential pressure sensor. Diese Steuerungsart betreibt das Gerät mit sollwertabhängigem Differenzdruck und externem Istwertgeber für Fernkühlungs-Anwendungen. Stratos GIGA 2.0;
117 108_RESERVED reserved for future use reserviert
118 109_RESERVED reserved for future use reserviert

This defines an alternative value for the following signal. This signal represents the control mode for the device. In case a selected mode is not supported, the device will stay in the previously selected mode.Dies definiert einen alternativen Wert für das folgende Signal. Dieses Signal beinhaltet die Steuerungsart für das Gerät. Wird eine gewählte Steuerungsart nicht unterstützt, bleibt das Gerät bei der zuletzt eingestellten Steuerungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.14.203 Setpoint Signal Source aux. in

propertyEigenschaft valueWert
instance #Instanz-Nr. 203
relinquish defaultRelinquish Default 1
functionFunktion input value Eingangswert
Module versionsModul-Versionen CIF-Module Ethernet Multiprotocol (3.03…99.99), CIF-Module BACnet MS/TP (3.01…99.99)
click left for details on enumerationlinks klicken für Details
valueWert Name descriptionBeschreibung supportunterstützt durch
1 IF-Module Signal source for setpoint: IF-ModuleSollwertquelle IF-Modul Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;
2 0…10 V Signal source for setpoint: IN2 mode 0…10 VSollwertquelle: IN2 Modus 0…10 V CIF-/IF-Module mapped; Stratos; IL_E, …; MVIE, …;
3 2…10 V Signal source for setpoint: IN2 mode 2…10 VSollwertquelle: IN2 Modus 2…10 V CIF-/IF-Module mapped; IL_E, …; MVIE, …;
4 0…20 mA Signal source for setpoint: IN2 mode 0…20 mASollwertquelle: IN2 Modus 0…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
5 4…20 mA Signal source for setpoint: IN2 mode 4…20 mASollwertquelle: IN2 Modus 4…20 mA CIF-/IF-Module mapped; IL_E, …; MVIE, …;
6 Internal Signal source for setpoint: internalSollwertquelle: Intern Stratos MAXO; Stratos GIGA 2.0;
7 EXT 1 Signal source for setpoint: EXT 1Sollwertquelle: EXT 1 Stratos MAXO; Stratos GIGA 2.0;
8 EXT 2 Signal source for setpoint: EXT 2Sollwertquelle: EXT 2 Stratos MAXO; Stratos GIGA 2.0;
9 INVALID Invalid valueUngültiger Wert CIF-/IF-Module internal;

This defines an alternative value for the following signal. This signal represents the source for the setpoint for the current control function.Dies definiert einen alternativen Wert für das folgende Signal. Dieses Signal enthält die Sollwertquelle in der aktuellen Regelungsart.

Support referenceWird unterstützt durch:

Stratos MAXO; Stratos GIGA 2.0; Stratos; IL_E, …; MVIE, …;

6.2.1 Pump controlPumpe steuern

Generally the pump is controlled by three parameters.Die Pumpe wird mit drei Parametern gesteuert.

The first is the setpoint which is scaled in percent. The maximum (100 %) values can be found at 21A1h (CONST_SPEED) 21A5h (VAR_DIFFPRSS) or 21ADh (CONST_PRESS / CONST_DIFFPRESS) Der erste Parameter ist der Sollwert, skaliert in %. Die Maximalwerte für die einzelnen Regelungsarten finden sich im Objekt 21A1h (CONST_SPEED) 21A5h (VAR_DIFFPRSS) bzw. 21ADh (CONST_PRESS / CONST_DIFFPRESS)

The second is the control mode which selects between constant speed (CONST_SPEED), constant (differential) pressure (CONST_PRES / CONST_DIFFPRESS) and other modes.Der zweite Parameter ist die Betriebsart und kann zwischen konstanter Drehzahl (CONST_SPEED), konstantem (Differenz-)Druck (CONST_PRESS / CONST_DIFFPRESS) und ggfs. weiteren ausgewählt werden.

The third parameter is the command which generally swiches the pump on or off.Der dritte Parameter ist das Kommando, welches die Pumpe EIN oder AUS schaltet.

Depending on the type of CAN communication you have to use different parameter sets. If you use simple control (more static , as described in 6.2.2) then the parameter set starting at 2000h is preferrable. If you use CANopen PDO mechanism the the parameters starting at 2008h are to be used.Abhängig von der Art der Kommunikation (PDO/SDO) müssen verschiedene Parametersätze verwendet werden. Wenn sie nur sporadisch steuern wollen (quasi-statisch, siehe Abschnitt 6.2.2), dann sind die Parameter ab 2000h zu bevorzugen. Wenn Sie den CANopen PDO Mechanismus verwenden wollen, dann sind die Parameter ab 2008h zu verwenden.

The readback of the parameters can be found starting with 2048h (selected ...).Die Rücklesewerte der Steuerungsparameter finden sich ab Objekt 2048h (selected ...).

The feedback (the really active) parameters can be found starting with 2040h (effective…)Die tatsächlich verwendeten Steuerungsparameter finden sich ab 2040h (effective…)

6.2.2 Simple operation without PDOsEinfache Steuerung ohne PDOs

For a very simple operation you might use SDO writes as follows:Für eine einfache Steuerung können Sie die SDO Schreibbefehle wie folgt verwenden :

6.2.3 Operation with use of PDOsSteuerung mit PDOs

Normally you would use a PLC with an .eds file import for your application.Im Normalfall wird für die Steuerung eine SPS verwendet. Dort (oder mit einem separatem Bus-Konfigurationstool) kann die .eds Datei für Ihre Applikation eingelesen werden.

First of all you have to check if the system supports MPDOs. If not, you should use the .eds file …_no_MPDO.eds. You should map the control parameters starting at 2008h into yor system and the values you desire. Please ensure that the systems sends out heartbeats and the parameter 1016h is configured correctly.Zunächst prüfen Sie bitte, ob Ihr System MPDOs unterstützt. Falls nicht, benutzen Sie bitte die .eds Dateien mit der Kennung …_noMPDO.eds. Sie sollten die Steuerungsparamter ab 2008h und die von Ihnen gewünschten Lesewerte in die PDOs mappen. Stellen Sie sicher, dass Ihr System die Heartbeatüberwachung aktiviert hat und der Parameter 1016h der Pumpe korrekt konfiguriert ist.

6.2.4 Use of MPDOsVerwendung von MPDOs

Normally the pump is configured to send out TPDO3 as an MPDO.In der Werkseinstellung ist die Pumpe so konfiguriert, dass sie den TPDO3 als MPDO schickt.

If your system supports MPDOs, the functionality can be defined in the system. If not, you may extract the data manually:Wenn Ihr System MPDOs unterstützt, kann die Funktionalität dort definiert werden. Wenn nicht, können Sie die Daten aus dem MPDO manuell extrahieren:

6.2.5 Object DictionaryObjektverzeichnis

6.2.6 Description of the network variablesBeschreibung der Netzwerkvariablen

This Modbus implementation supports the function codes 03, 04, 06 and 16.Diese Modbus-Implementierung unterstützt die Funktionscodes 03, 04, 06 und 16.

NOTE: All register addresses are raw addresses as they are transferred over the trunk. Sometimes an offset of 1 applies.HINWEIS: Alle Register-Adressen sind Rohwerte, wie sie über die Busleitung gesendet werden. In manchen Systemen ergibt sich dadurch ein Offset von 1.

This paragraph is intentionally empty.Dieser Abschnitt bleibt leer.

6.3 Control input 0…10 VSteuereingang 0…10 V

When one of the modules listed above is used, the menue offers an extra item where the 0...10 V input can be activated or deactivated. When using the module Ext. Off / SBM the 0…10 V input has to be deactivated in any case.Wenn eins der oben gelisteten IF-Module verwendet wird, kann in einem speziellen Menüpunkt der 0…10 V Eingang aktiviert bzw. deaktiviert werden. Bei Verwendung des Moduls Ext. Off / SBM muss der 0…10 V Eingang in jedem Fall deaktiviert werden.

6.3.1 Control input in modes 2…10 V and 4…20 mASteuereingänge in den Modi 2…10 V und 4…20 mA

When one of these modes for the control input In2 is used <5.4.2.0>, please note that values below 2 V / 4 mA are processed as zero. No reaction on the open loop is performed.Wenn einer dieser Modi für den Eingang IN2 gewählt wurde <5.4.2.0>, werden Eingangswerte unterhalb von 2 V / 4 mA wie Null behandelt. Eine spezielle Reaktion findet nicht statt.

6.4 Control input Ext. OffSteuereingang Ext. Off

Input for dry contact (NC)Eingang für potenzialfreien Öffner

6.5 Control input Ext. MinSteuereingang Ext. Min

Input for dry contact (NO)Eingang für potenzialfreien Öffner

  • Contact closed: pump operates under auto controlKontakt geschlossen: Pumpe arbeitet im Regelbetrieb
  • Contact open: pump operates at a fixed minimum speedPumpe läuft auf fester Min.-Drehzahl

The Ext. Min input results in operation at a rotational speed where the pump would achieve 20 % of the maximum head at zero flow. This is a pump type specific but constant value. No closed loop control is active.Ein aktivierter Ext. Min Eingang führt zu einer Drehzahl der Pumpe entsprechend der Drehzahl für 20 % der maximalen Förderhöhe bei Nullmenge. Dies ist eine Pumpenkonstante. Es ist keine Druckregelung aktiv.

6.6 Signalling output SBMMeldeausgang SBM

6.7 DP dual pump interfaceDP Doppelpumpen-Schnittstelle

Interface between two pumps acting together as a double pump. The roles of the two pumps (master/slave) and the operating mode (main/standby or paralleloperation) can be set.Schnittstelle zwischen zwei Pumpen, die als Doppelpumpe zusammenwirken. Es kann die Rolle der beiden Pumpen (Master/Slave) und die Betriebsart (Haupt/Reserve bzw. Additionsbetrieb) eingestellt werden.

The Ext. Off input is only active at the master pump.Der Ext. Off Eingang ist nur an der Master-Pumpe aktiv.

The behavior of Ext. Off is selectable with the Wilo IR-Stick software: either the input at the master pump controls both pumps or both pumps use their individual inputs.Das Verhalten des Ext. Off Eingangs kann mit der WILO IR-Stick Software eingestellt werden: entweder der Eingang an der Master-Pumpe steuert beide Pumpen oder jede Pumpe reagiert auf ihren eigenen Eingang.

6.8 Wilo-NetWilo-Net

Wilo-Net is a network interface based on CAN physical interface. It it allows the following functionaliyWilo-Net ist ein Netzwerk-Anschluss auf Basis von CAN für folgende Funktionalität:

6.9 BluetoothBluetooth

The Bluetooth® interface enables the remote connection from a pump with the Smart-IF to a smartphone or tablet computer for diagnostics and control.Die Bluetooth® Schnittstelle erlaubt eine drahtlose Verbindung mit einem Smartphone oder Tablet zur Steuerung und Diagnose.

6.10 Digital sensor interfaceDigitale Sensor-Schnittstelle

Digital sensor interface allows the connection of the following devices:Die digitale Sensor-Schnittstelle erlaubt den Anschluss der folgenden Sensoren:

The immersion temperature sensor marked with "1" is used for the forward temperature of the circuit and the sensor marked with "1" is used for the return temperature of the circuitDer Tauch-Temperaturfühler mit der Markierung "1" dient zur Erfassung der Vorlauftemperatur. Der Sensor mit der Markierung "2" ist für die Rücklauftemperatur vorgesehen.

7 Installation and electrical connectionInstallation und elektrischer Anschluss

Installation and electrical connection must be carried out in accordance with local regulations and only by qualified personnel.Installation und elektrischer Anschluss sind gemäß örtlichen Vorschriften und nur durch Fachpersonal durchzuführen!

WARNING! Risk of personal injury! The existing directives for accident prevention must be adhered to.WARNUNG! Gefahr von Personenschäden! Die bestehenden Vorschriften der Unfallverhütung sind zu beachten.

DANGER! Risk of fatal electrical shock!GEFAHR! Lebensgefahr durch Stromschlag!

Danger from electrical current must be eliminated. Local directives or general directives [e.g. IEC, VDE etc.] and those of local power supply companies must be adhered to.Gefährdungen durch elektrische Energie sind auszuschließen. Weisungen lokaler oder genereller Vorschriften [z. B. IEC, VDE usw.] und der örtlichen Energieversorgungsunternehmen sind zu beachten.

7.1 InstallationInstallation

../img/STRATOS_IF_mounting_cabelling.jpg
Figure 7.1.1 Mounting of IF-ModuleAbbildung 7.1.1 Montage des IF-Moduls
../img/TL_IF_mounting_size_1_to_4.png
Figure 7.1.1 Mounting of IF-Module for pumps up to 4 kWAbbildung 7.1.1 Montage des IF-Moduls für Pumpen bis 4 kW
../img/TL_IF_mounting_size_5.png
Figure 7.1.2 Mounting of IF-Module for pumps 5…7.5 kWAbbildung 7.1.2 Montage des IF-Moduls für Pumpen 5…7.5 kW
../img/TL_IF_cabelling_size_1_to_4.png
Figure 7.1.3 Cable shield connection for pumps up to 4 kWAbbildung 7.1.3 Anschluss des Leitungsschirms für Pumpen bis 4 kW
../img/TL_IF_cabelling_size_5.png
Figure 7.1.4 Cable shield connection for pumps 5…7.5 kWAbbildung 7.1.4 Anschluss des Leitungsschirms für Pumpen 5…7.5 kW

The mounting of the CIF-modules for other pump types is described in the pump manual.Die Montage der CIF-Module für andere Pumpentypen ist in der Betriebsanleitung der Pumpe beschrieben.

To ensure immunity in industrial environments (IEC 61000-6-2) the data cables must be shielded cables and must be used with an EMC-compliant cable gland (included with the module, if necessary). Shield shall be connected to earth on both ends.Zur Gewährleistung der Störfestigkeit in industriellen Umgebungen (IEC 61000-6-2) sind für die Datenleitungen eine geschirmte Leitung und eine EMV-gerechte Leitungseinführung zu verwenden (ggf. im Lieferumfang des Moduls). Der Schirm ist beidseitig auf Erde aufzulegen.

For optimal transmission with BACnet MS/TP, CANopen or Modbus RTU, the data cable pair should be twisted and have a characteristic impedance of 120 Ω.Für eine optimale Übertragung sollte das Datenleitungspaar bei BACnet MS/TP, CANopen oder Modbus RTU verdrillt sein und einen Wellenwiderstand von 120 Ω aufweisen.

DANGER! Risk of fatal electrical shock!GEFAHR! Lebensgefahr durch Stromschlag!

Installation steps in accordance with Fig. 7.1.1 or 7.1.2:Installationsschritte nach Abb. 7.1.1 bzw. 7.1.2:

Installation steps in accordance with Fig. 7.1.1:Installationsschritte nach (Abb. 7.1.1):

Electrical connection follows (see section below).Anschließend erfolgt der elektrische Anschluss (siehe untenstehender Abschnitt).

7.2 Electrical connection with terminalsElektrischer Anschluss mit Klemmen

DANGER! Risk of fatal electrical shock!GEFAHR! Lebensgefahr durch Stromschlag!

Electrical connection must be carried out by an electrician authorised by the local electricity supply company and in accordance with the applicable local regulations [e.g. VDE regulations].Der elektrische Anschluss ist von einem beim örtlichen Energieversorgungsunternehmen zugelassenen Elektroinstallateur und entsprechend den geltenden örtlichen Vorschriften [z. B. VDE-Vorschriften] auszuführen

CAUTION! The maximum torque for the terminal screws is 0.2 Nm. Exceeding this torque can damage the module.VORSICHT! Das maximale Drehmoment der Klemmenschrauben beträgt 0,2 Nm. Ein Überschreiten kann das Modul beschädigen.

CAUTION! No voltage shall be applied on the Ext. Off or Ext. Min inputs. Only dry contacts suitable for safety extra low voltage (SELV) shall be used. Applying a voltage can damage the module.VORSICHT! Es darf keine Fremdspannung an den Ext. Off bzw. Ext. Min Eingängen angelegt werden. Ausschließlich potentialfreie Kontakte mit Eignung für Schutzkleinspannung (SELV) dürfen verwendet werden. Eine Fremdspannung kann das Modul beschädigen.

../img/CIF_IF_RS485_wiring_IL.PNG
Figure 7.2.1 wiring in line RS485Abbildung 7.2.1 Verdrahtung Linie RS485
../img/CIF_IF_RS485_wiring_EL.PNG
Figure 7.2.2 wiring end of line RS485Abbildung 7.2.2 Verdrahtung Linien-Ende RS485

The terminals of the CIF-modules with RS485 are marked with A(-) and B(+). The marking complies with the RS485 standard. Nevertheless some manufacturers of automation equipment are using the opposite marking of A and B. This may cause communication issues.Bei RS485 sind die Anschlussklemmen mit A(-) und B(+) markiert. Die Markierung stimmt mit dem Standard überein. Trotzdem verwenden einige Hersteller die umgekehrte Markierung von A und B. Dies kann zu Kommunikationsproblemen führen.

RS485 does not allow any loops, star connections or stub lines. All devices shall be daisy chained.RS485 erlaubt keine Schleifen, sternförmige Verdrahtung oder Stichleitungen. Alle Geräte müssen in Reihe geschaltet sein.

7.3 Electrical connection with RJ45 connectorsElektrischer Anschluss mit RJ45-Steckverbindungen

DANGER! Risk of fatal electrical shock!GEFAHR! Lebensgefahr durch Stromschlag!

Electrical connection must be carried out by an electrician authorised by the local electricity supply company and in accordance with the applicable local regulations [e.g. VDE regulations].Der elektrische Anschluss ist von einem beim örtlichen Energieversorgungsunternehmen zugelassenen Elektroinstallateur und entsprechend den geltenden örtlichen Vorschriften [z. B. VDE-Vorschriften] auszuführen

Das CIF-Modul enthält einen Ethernet-Switch. Für die Funktion ist nur ein Anschluss an das Netzwerk erforderlich. Mit dem zweiten Anschluss können weitere Geräte mit dem Netzwerk verbunden werden.

Note: Hinweis: Die Weiterleitung von Daten über diesen Switch kannn nur erfolgen, wenn die die Spannungsversorgung der Pumpe eingeschaltet ist.

8 Commissioning/functional testInbetriebnahme/Funktionsprüfung

This manual describes only the basic installation.Diese Anleitung beschreibt nur die grundlegende Installation.

Die vollständige Anleitung finden sie unter www.wilo.de/automation

The complete manual can be found at www.wilo.com/automation

The following sections describe the test of the input/output functionality. It is recommended to test together with the connected system. The pump´s installation and operating instructions are needed for some settings.Die nachfolgenden Abschnitte beschreiben die Prüfung der Funktion der Ein-/Ausgänge. Es wird eine Prüfung in Verbindung mit der angeschlossenen Anlage empfohlen. Für einige Einstellungen wird die Betriebsanleitung der Pumpe benötigt.

8.1 Dual pump (DP) interfaceDoppelpumpen (DP) Schnittstelle

For dual pump operation, only one IF-module of the type above shall be present in the master pump.Bei Doppelpumpenbetrieb darf nur eins der oben spezifizierten IF-Module in die Master-Pumpe eingebaut werden.

For dual pump operation, the master pump should have the higher software version (if not identical)Bei Doppelpumpenbetrieb sollte der Master die höhere Softwareversion aufweisen, falls diese verschieden sind.

The slave should be equipped with one of the following modules:Die Slave Pumpe sollte mit einem der folgenden IF-Module bestückt werden:

The slave pump shall be connected to the master pump via the DP terminals of the IF module.Der Slave wird über die DP Klemmen des IF-Moduls angeschlossen.

The slave pump shall be connected to the master pump via the MP terminals of the pump.Der Slave wird über die MP-Klemmen der Pumpe angeschlossen.

8.1.1 Y-pipe installationHosenrohrinstallation

Please note for Y-pipe installations (pump heads not in common housing):Bei Hosenrohrinstallation (Pumpen nicht im gemeinsamen Doppelpumpengehäuse) ist zu beachten:

The slave pump shall be connected to the master pump via the MP terminals of the pump.Der Slave wird über die MP-Klemmen der Pumpe angeschlossen.

8.2 SettingsEinstellungen

8.2.1 GeneralAllgemeines

To access the menu settings <5.x.x.x>, the DIP-switch # 1 (not the one with the key symbol) unter the lid of the terminal box has to be set to "ON".Um die Einstellungen in den Menüs <5.x.x.x>, vornehmen zu können, muss der DIP-Schalter 1 (nicht der mit dem Schüssel-Symbol) unter der Klemmenkastenabdeckung auf "ON" gesetzt werden.

The settings for the CIF-modules can be found at Settings/External interfaces/Die Einstellungen für die CIF-Module finden sich im Menü Einstellungen/Externe Schnittstellen/…

Extended settings are available with web browser on port 80 for Ethernet CIF-Modules.Erweiterte Einstellungen für die CIF-Module Ethernet sind über einen Web-Browser auf Port 80 erreichbar.

When a valid set of parameters (address, A and further) is chosen and the pump menu is left, the IF-module will start up and shows the ability to communicate with the ⇔ / ⇅ symbol in the pump. The symbol does not indicate the exchange of data.Wenn ein gültiger Satz Parameter (Adresse und Parameter A sowie ggf. weitere) ausgewählt wurde, startet das IF-Modul nach Verlassen des Menüs mit diesen Parametern und zeigt die Kommunikationsbereitschaft mit dem ⇔ / ⇅ Symbol an der Pumpe an. Das Symbol zeigt nicht den Austausch von Daten an.

After setting up the IF module according subsequent sections, the setpoint Nachdem das IF-Modul entsprechend den folgenden Abschnitten eingestellt wurde, folgen der Sollwert <1.0.0.0> , the control mode , die Regelungsart <2.0.0.0> and the on/off state und der Ein/Aus-Befehl <3.0.0.0> do no longer follow the local settings previously made, but they follow the values stored in the IF-module. If the building automation system is not available, you may set the address nicht mehr der zuvor eingestellten lokalen Vorgabe, sondern den im IF-Modul hinterlegten Werten. Ist eine Steuerung über die Gebäudeautomation nicht möglich, kann der Zugriff auf die lokale Einstellung durch Setzen der Adresse auf OFF "⇅" <5.2.3.0> to OFF. In this state, local control is active.wieder hergestellt werden.

Before starting with commissioning, please make sure that you are using the the latest firmware and .XIF files available at Bevor Sie mit der Inbetriebnahme beginnen, stellen Sie sicher, dass Sie die aktuelle Firmware und ggfs. .XIF Dateien zur Verfügung haben. Verfügbar unter: Wilo Automation (en)Wilo Automation (de)

By factory setting the LON module has the status offline/unconfigured. In this state the module does not communicate with the pump (no ⇔).Im Lieferzustand ist das Modul im Zustand offline/unconfigured. In diesem Zustand kommuniziert es auch nicht mit der Pumpe (kein ⇔ Symbol im Pumpendisplay).

To initiate the service-pin of the device, you may press the button at the CIF-module.Um den eine Service-Pin Nachricht zu senden, gibt es beim CIF-Modul einen Taster.

8.2.1.1 Service pin / Status LED

Status LEDStatus-LED Condition(s)Bedingung(en) RemarkBemerkung
ONEIN Service pin pressedService-Pin gedrückt  
InitializationInitialisierung if configured (short flash)wenn konfiguriert (kurzer Impuls)
Applicationless and unconfiguredohne Applikation and unkonfiguriert  
Defective memorySpeicher defekt  
flashing (0.5 Hz)blinkt (0,5 Hz) Module unconfiguredModul unkonfiguriert but with application (factory setting)aber mit Applikation
OFFAUS Module configuredModul konfiguriert  
Fig. 8.2.1.1.1: Service pin / Status LEDAbb. 8.2.1.1.1: Service pin / Status LED

8.2.1.2 Local control (override BAS)Lokale Vorrangbedienung

Today, no permanent local control override is possible while the LON communication is active.Derzeit ist keine dauerhafte Übersteuerung von LON bei gleichzeitiger Kommunikation möglich.

8.2.1.3 LON timing

For all neuron application versions (SW) below 3.00 the the maximum response time is 300 ms. For polling mode (request message service), the timeout shall be set equal or higher than 300 ms.Für alle Neuron-Applikations-Versionen < 3.00 ist die maximale Antwortzeit 300 ms. Für Polling-Betrieb (request message service) sollte der Timeout-Wert auf mindestens 300 ms eingestellt werden.

To ensure a reliable data transmission, at least 3 retries are recommended.Für eine zuverlässige Datenübertragung wird eine Telegrammwiederholungsanzahl von mindestens 3 empfohlen.

8.2.1.3 LON transmission on change of valueLON Übertragung bei Wertänderung

variableVariable transmission on value change of more than…Übertragung bei Änderung des Wertes um mehr als…
nvoPumpCapacity 5% of the value in nroPumpChar.pressMax (differential pressure control ) or 2% of the value in nroPumpChar.speedMax (speed control)5% des Wertes in nroPumpChar.pressMax (bei Differenzdruckregelung) oder 2% des Wertes in nroPumpChar.speedMax (bei Drehzahlsteller)
nvoPressure 5% of the value in nroPumpChar.pressMax5% des Wertes in nroPumpChar.pressMax
nvoFlow 5% of the value in nroPumpChar.flowMax5% des Wertes in nroPumpChar.flowMax
nvoSpeed 2% of the value in nroPumpChar.speedMax2% des Wertes in nroPumpChar.speedMax
nvoFluidTemp 5 °C5 °C
nvoPower 10% of the max. power10% der maximalen Leistungsaufnahme
nvoPowerkilo 10% of the max. power10% der maximalen Leistungsaufnahme
Fig. 8.2.3.1.1: COV conditionsAbb. 4.1.1: Bedingungen Übertragung bei Wertänderung

No settings are necessary at the pump.An der Pumpe sind keine Einstellungen erforderlich.

8.2.2 Bus AddressBus-Adresse

Set the bus address in the pump menu Busadresse im Pumpenmenü <5.2.3.0> "⇅" .einstellen.

Effectively the bus address is the BACnet MS/TP MAC address.Die eingestellte Bus-Adresse entspricht der BACnet MS/TP MAC-Adresse.

Effectively the bus address is the CANopen Node-ID.Die eingestellte Bus-Adresse entspricht der CANopen Node-ID.

Effectively the bus address is the WiloNet address.Die eingestellte Bus-Adresse entspricht der WiloNet Adresse.

OFF deactivates the interface.OFF deaktiviert die Schnittstelle.

8.2.2.1 MAC address rangesMAC Adressbereiche

With firmware 2.00 or higher the IF-modules support MS/TP master functionality.Beginnend mit Firmware 2.00 unterstützen die IF-Module die MS/TP Master Funktionalität.

If the MAC address is set to 0…127, the module operates as MS/TP master (standard setting), if set to 128…254, it operates as slave (only recommended for experienced users).Das Modul arbeitet als MS/TP Master mit einer Adresse im Bereich 0…127 und als MS/TP Slave im Bereich 128…254. Der Betrieb als Slave empfiehlt sich für erfahrene Benutzer und bietet Performance-Vorteile.

For best performance of the network choose MAC addresses without gaps starting at 0. Take care that your router/controller has also a MAC address to be respected.Für besten Datendurchsatz sollten Sie fortlaufende MAC-Adressen ab 0 verwenden. Beachten Sie, dass der Router/Controller ebenfalls eine MAC-Adresse belegt.

After the system is successfully running, you may optimize performance by writing the BACnet property "max master" of the device object in each device to the highest MAC address used within the network plus a few spare addresses for extensions. A high setting of "max-master" as well as gaps of addresses reduce the performance of the network due to unwanted "poll for master" messages and their timeouts.Nachdem das System erfolgreich läuft, können Sie den Durchsatz optimieren, indem Sie die Eigenschaft "max-Master" des Device-Objekts anpassen. Es empfiehlt sich ein Wert, der nach der letzten benutzen Adresse einige Adressen für Erweiterungen freihält. Lücken in der Adressierung und eine hohe Einstellung von "max-Master" reduzieren die Performance durch unnötige "poll for master" Nachrichten und deren Timeouts.

8.2.2.2 Working with firmware (SW) 1.11Betrieb mit Firmware (SW) 1.11

When planning the integration of IF-modules with SW 1.xx, please make sure that your system supports MS/TP slaves. Slaves cannot answer to the who-is broadcast requests used for device lookup.Wennn Sie die Integration mit IF-Modulen mit SW1.xx planen, muss Ihr Automationssystem BACnet MS/TP Slaves unterstützen. Slaves können nicht auf die typischerweise zur Geräteerkennung benutzten Who-Is Anfragen antworten.

If your system does not support MS/TP slaves, a slave proxy device or a slave proxy capable router (e.g. UBR-01 (Falls Ihr System keine MS/TP Slaves unterstützt, kann ein Slave-Proxy Gerät oder ein Router mit Slave-Proxy Funktion (z.B. UBR-01 von (MBS-Software), L-IP-ME201 (), L-IP-ME201 von (Loytec)) may be used. For further details please refer to the PICS statement.)) verwendet werden. Details dazu finden Sie im PICS Statements Ihrer Geräte.

We strongly recommend to create manual slave address bindings instead of automatic slave discovery.Wir empfehlen, eine manuelle Slave-Liste anstelle der automatischen Slave-Erkennung zu benutzen.

8.2.3 Transmission speed (baud rate)Übertragungsgeschwindigkeit (Baudrate)

Set baud rate in the pump menu Baudrate im Pumpenmenü <5.2.4.0> in accordance with the following table:nach folgender Tabelle einstellen:

(Parameter A)(Parameter A) Speed Bit/sGeschwindgkeit Bit/s
0 300
1 600
2 1200
3 2400
4 4800
5 9600
6 19200
7 38400
8 57300
9 115200
10 76800
fig. 8.2.3.1: transmission speedAbb. 8.2.3.1: Übertragungsgeschwindigkeit

8.2.3 Parameter A - Bluetooth® pairing lock Parameter A - Bluetooth®-Sperre

A value of 0 allows new pairings with the device while a value of 1 disallow new pairings with the device. Set a value of 1 to disable access from new end user devices.Der Wert 0 erlaubt ein Pairing mit dem Gerät, während ein Wert von 1 das Pairing sperrt. Stellen Sie 1 ein, um keine neuen Endgeräte zuzulassen.

(Parameter A is in menu <5.2.4.0>)(Parameter A ist im Menü <5.2.4.0>.)

8.2.4 Parameter C - data frameParameter C - Datenrahmen

Modbus RTU defines a frame with 8 data bytes, a parity bit and one or two stop bits. The parity bit can be either even (E), odd (O) or no parity (N). The following options are available:Modbus RTU definiert einen Datenrahmen mit 8 Datenbits, einem Paritätsbit und einem bzw. zwei Stoppbit. Das Paritätsbit kann entweder gerade (E), ungerade (O) oder nicht vorhanden (N) sein. Die möglichen Werte finden Sie in der nachfolgenden Tabelle:

(Parameter C is in menu <5.2.5.0>)(Parameter C ist im Menü <5.2.5.0>.)

(Parameter C)(Parameter C) formatFormat
2 8,N,1
3 8,N,2
6 8,E,1
10 8,O,1
fig. 8.2.4.1: frame settingAbb. 8.2.4.1: Datenrahmen

All other values are reserved and shall not be used.Alle anderen Werte sind reserviert und dürfen nicht benutzt werden.

8.2.4 Parameter C - Bluetooth® Link key eraseParameter C - Bluetooth® Link-Keys löschen

Setting a value of 1 will erase all Bluetooth® link keys (pairings) in the device. After successful operation, the value of this parameter is reset to 0.Schreiben Sie den Wert 1 in den Parameter, um alle Bluetooth® Link Keys (Pairings) zu löschen. Nach erfolgreicher Ausführung des Befehls springt der Wert automatisch wieder auf 0.

(Parameter C is in menu <5.2.5.0>)(Parameter C ist im Menü <5.2.5.0>.)

8.2.5 Parameter E - Bluetooth® activationParameter E - Bluetooth® Aktivierung

Setting a value of 1 will allow Bluetooth® connection, while a value of 0 will block Bluetooth® connection with the device.Ein Wert von 1 aktiviert die Bluetooth®-Schnittstelle, während ein Wert von 0 sie deaktiviert.

(Parameter E is in menu <5.2.6.0>)(Parameter E ist im Menü <5.2.6.0>.)

8.2.6 Device instance number (device-id) settingDevice-Instanznummer (Device-ID) Einstellung

Set device instance # (device-id) the pump menu Device-Instanznummer im Pumpenmenü <5.2.5.0>…<5.2.7.0>.einstellen.

Instead of following the instructions in the printed manual, you may use this online calculation tool instead.Anstelle der Berechnungsschritte in der gedruckten Anleitung können Sie diesen Kalkulator verwenden.

The device instance number (aka device-id) is set with the parameters C, E, F. With the form below you can calculate the values for your selected instance number. This is more convenient than the procedure described in the printed manual.Die Device-Instanznummer (oder Device-ID) des IF-Moduls wird mit den Parametern C, E, F eingestellt. Mit dem Formular unten können Sie die Werte für die von Ihnen gewünsche Instanznummer berechnen.

Calculator:Kalkulator: BACnet Device Instance:BACnet Device Instanz

C: <5.2.5.0>
E: <5.2.6.0>
F: <5.2.7.0>

The BACnet instance number is set with the parameters C, E and F. This requires conversion into a hexadecimal value) (indicated subsequently by an ‘h’ suffix). The instance number is divided between the three parameters (example 4660):Die BACnet-Instanznummer wird mit den Parametern C, E und F eingestellt. Dazu ist eine Umrechnung in einen Hexadezimalwert erforderlich) (im Folgenden durch nachgestelltes ‚h’ angedeutet). Dazu wird die Instanznummer auf die drei Parameter aufgeteilt (Beispiel 4660):

  • Convert the instance number into a hexadecimal value (1234h)Umrechnen der Instanznummer in einen Hexadezimalwert (1234h)
  • Expand the result to 6 digits by adding zeros on the left (001234h)Ergebnis mit Nullen links auf 6 Stellen auffüllen (001234h)
    • C contains the two digits on the right (34h)C beinhaltet die rechten zwei Stellen (34h)
    • E contains the two digits in the middle (12h)E beinhaltet die mittleren 2 Stellen (12h)
    • F contains the two digits on the left (00h)F beinhaltet die linken zwei Stellen (00h)
  • Convert the individual parameters into a decimal valueUmrechnen der einzelnen Parameter in einen Dezimalwert
    • C contains the two digits on the right (52)C beinhaltet die rechten zwei Stellen (52)
    • E contains the two digits in the middle (18)E beinhaltet die mittleren 2 Stellen (18)
    • F contains the two digits on the left (00)F beinhaltet die linken zwei Stellen (00)
  • Enter each parameter via the pump´s menuEingeben der einzelnen Parameter über das Menü der Pumpe

8.2.7 Fieldbus configuration "read only"Buskonfiguration "Nur Lesen"

When using CIF-Modules, the local menu is active in the states MANUAL or MANUAL PRESET of the datapoint bus command timer. In these states, it is not necessary to write settings from fieldbus.Bei CIF-Modulen ist in den Zuständen MANUAL bzw. MANUAL_PRESET des bus command timers eine lokale Bedienung möglich. Eine Vorgabe von Werten über den Feldbus ist nicht erforderlich.

This paragraph is intentionally empty.Dieser Abschnitt bleibt leer.

8.2.8 Analog input as setpoint source Analoger Eingang als Sollwertquelle

When using CIF-Modules, the local menu and the control input IN2 are disabled by factory setting. The local menu can be enabled permanently by writing the value MANUAL to the bus command timer.In der Werkseinstellung der CIF-Module ist der Eingang IN2 sowie die Sollwertvorgabe über den Bedienknopf gesperrt. Die örtliche Sollwertvorgabe kann durch einmaliges Schreiben des Wertes MANUAL auf den Datenpunk Bus Command Timer freigegeben werden.

The input IN2 can be enabled at the menue <5.4.1.0>.Der Eingang IN2 kann im Menü <5.4.1.0> freigegeben werden.

With LON/PLR, an analog input cannot be used as setpoint source.Bei LON/PLR kann ein analoger Eingang nicht als Sollwertquelle benutzt werden.

8.3 Functional test / basic exampleFunktionsprüfung / Einfaches Beispiel

Assuming a pump with the transmission speed of 38400 bits/s, a MAC address of 127 and an Instance number (device-id) of 4660.Für den Test wird eine Pumpe mit Übertragungsgeschwindigkeit 38400 Bit/s, einer MAC-Adresse von 127 und einer Instanznummer (device-id) von 4660 angenommen.

ParameterParameter SymbolSymbol MenuMenü SettingEinstellung RemarkBemerkung
MAC 5.2.3.0 127  
A A 5.2.4.0 7  
B       not usednicht verwendet
C C 5.2.5.0 52  
D       not usednicht verwendet
E E 5.2.6.0 18  
F F 5.2.7.0 0  
fig. 8.3.1: settings at the pumpAbb. 8.3.1: Einstellungen an der Pumpe

The following table shows a control example for speed mode 50 %, pump on:Die folgende Tabelle zeigt ein Steuerungsbeispiel für Drehzahlsteuerung (CONST_SPEED), 50 % Sollwert, Pumpe Ein :

Object nameObjekt-Name Object typeObjekt-Typ Object instanceObjekt-Instanz SettingEinstellung RemarkBemerkung
Bus Setpoint AO 0 50.0  
Bus Command Pump on BO 0 ACTIVE  
Bus Command off override BO 1 INACTIVE  
Bus Command max override BO 2 INACTIVE  
Bus Command min override BO 3 INACTIVE  
Bus Control Mode MO 0 CONST_SPEED state 1
Bus Command Timer MO 1 OFF state 1
External Source MO 3 OFF state 1
fig. 8.3.2: basic example - settings of BACnet objectsAbb. 8.3.2: Einfaches Beispiel - Einstellungen der BACnet-Objekte

This paragraph is intentionally empty.Dieser Abschnitt bleibt leer.

The following setup sequence shows a basic setting for the CIF-Modbus. the <a.b.c.d.e> indicate the menue numbers (not Stratos). For Stratos the menue is described in the text.Die folgenden Einstellungsschritte zeigen eine Grundeinstellung für das CIF-Modul Modbus. Die <a.b.c.d.e> Ziffernkombinationen bezeichnen die Menünummer (nicht Stratos). Für Stratos siehe Beschreibung im Text

Below please find a snapshot for this communication example (M- Modbus Master S- Slave (the pump)):Im Folgenden finden Sie einen Auszug aus der Kommunikation für das obige Beispiel (M-Modbus Master S- Slave (Pumpe)):

01 04 02 BC 00 01 F1 96       M: 04-Rd_InputReg ID#2 Rd 30701, 1
01 04 02 02 00 B8 50          S: 04-Rd_InputReg ID#2 cnt=2, Rd 30701=512 (0x0200) // software version 2.00
01 06 01 2C 00 01 88 3F       M: 06-Wr_SHoldReg ID#3 Wr 40301=1 (0x0001)
01 06 01 2C 00 01 88 3F       s: 06-Wr_SHoldReg ID#3 Wr 40301=1 (0x0001)
01 06 00 2A 00 01 69 C2       M: 06-Wr_SHoldReg ID#4 Wr 40043=1 (0x0001)
01 06 00 2A 00 01 69 C2       s: 06-Wr_SHoldReg ID#4 Wr 40043=1 (0x0001)
01 06 00 01 00 C8 D9 9C       M: 06-Wr_SHoldReg ID#5 Wr 40002=200 (0x00C8)
01 06 00 01 00 C8 D9 9C       s: 06-Wr_SHoldReg ID#5 Wr 40002=200 (0x00C8)
01 06 00 28 00 09 C9 C4       M: 06-Wr_SHoldReg ID#6 Wr 40041=9 (0x0009)
01 06 00 28 00 09 C9 C4       s: 06-Wr_SHoldReg ID#6 Wr 40041=9 (0x0009)

9 MaintenanceWartung

The modules described in these instructions are maintenance-free.Die in dieser Anleitung beschriebenen Module sind grundsätzlich wartungsfrei.

10 Faults, causes and remediesStörungen, Ursachen und Beseitigung

Have repairs done by qualified skilled personnel only!Reparaturarbeiten nur durch qualifiziertes Fachpersonal!

DANGER! Danger of electric shock! Any danger from electrical current should be ruled out.GEFAHR! Lebensgefahr durch Stromschlag! Gefahren durch elektrische Energie sind auszuschließen!

WARNING! Risk of scalding! At high fluid temperatures and system pressures, allow the pump to cool down first and then depressurise the system.WARNUNG! Verbrühungsgefahr! Bei hohen Mediumtemperaturen und Systemdrücken Pumpe vorher abkühlen lassen und System drucklos machen.

FaultsStörungen CausesUrsachen RemedyBeseitigung
Communication with external control is disruptedKommunikation mit externer Steuerung gestört Wrong communication parameter(s)Kommunikationsparameter falsch Check, and adjust if necessary (see Commissioning)Prüfen, ggfs. einstellen (siehe Inbetriebnahme)
Damaged wiringVerdrahtung beschädigt Check whether other bus nodes are affected in order to find position of missing conectionPrüfen, ob weitere Busteilnehmer betroffen sind, um Fehler einzugrenzen
Flow value not availableDurchflusswert nicht verfügbar R1 version of pump (w/o pressure sensor)R1 Version der Pumpe (ohne Drucksensor) install pressure sensorDrucksensor installieren
Multistage pump (Helix et. al.)Mehrstufen-Pumpe (Helix und andere) not possible with those pumpsNicht möglich mit diesen Pumpen
Single stage glanded pump (IL-E et. al) in n-c mode (CONST_SPEED)Trockenläufer-Pumpen einstufig (IL-E und andere) im n-c Modus (CONST_SPEED) change control mode to dp-c/dp-vBetriebsart ändern zu dp-c/dp-v
Flow value inaccurateDurchflußwert ungenau Viscosity of fluid changed by additivesViskosität des Fördermediums durch Additive beeinflußt  
Setpoint is not reachedSollwert wird nicht erreicht Pumpe is at power or speed limitPumpe ist an Leistungs- oder Drehzahlgrenze Reduce setpointSollwert reduzieren
Setpoint is not reachedSollwert wird nicht erreicht Multistage pump (Helix et. al.): maximum value is sensor range, not max. head of the pumpMehrstufen-Pumpe (Helix und andere): Maximalwert ist Sensor-Meßbereich, nicht max. Förderhöhe der Pumpe Reduce setpointSollwert reduzieren
Priority array set to NULL, present value is not the reliquish defaultdas Priority Array wurde geNULLt, trotzdem ist der Present Value nicht der Relinquish Default Default is dynamic and comes as virtual write from inside to priority 16Default-Wert ist dynamisch und kommt deshalb als virtueller Schreibbefehl auf Priorität 16 von innen -
Update Stratos MAXO to bundle 01032101 failsUpdate Stratos MAXO auf Bundle 01032101 schlägt fehl CIF-Module neesds to be passive during this updateCIF-Modul muss während dieses Updates passiv sein de-activate CIF-ModuleCIF-Modul deaktivieren
CIF Module does not work properly after update of pump softwareCIF-Module funktioniert nach Update der Pumpensoftware nicht mehr richtig CIF Module cache initialization failedCIF-Modul Zwischenspeicher wurde nicht richtig aktualisiert de-activate and re-activate CIF-ModuleCIF-Modul deaktivieren / aktivieren
Parameter A not availableParameter A nicht verfügbar Firmware incompatibleFirmware der Pumpe nicht kompatibel change pump electronicsPumpenelektronik austauschen
Who-Is Requests are not answeredWho-Is Anfragen werden nicht beantwortet IF-Module has SW 1.11 (cannot respond)IF-Modul hat SW 1.11 (kann nicht antworten, da MS/TP Slave) replace by version >=SW 2.00ersetzen durch IF-Modul >=SW 2.00
SW2.00 cannot answer to Who-Is without range(issue)SW2.00 antwortet nicht bei Who-Is Anfragen ohne Bereich Initiate Who-Is request with rangeBei Who-Is Anfrage Bereich angeben
SW 1.xx: MS/TP slave is not detected, even if inserted manually in a slave listSW 1.xx: MS/TP Slave wird nicht erkannt, auch nicht bei Eintrag in manueller Slave-Liste Slave detection uses wildcard instance number for other properties than object-identifierSlave-Erkennung des Routers nutzt die Wildcard-Instanznummer für andere Properties als Object-Identifier (75) use one of the routers specifiedBenutzen Sie einen der angegebenen Router
Error E054 in pump displayFehler E054 im Pumpendisplay Bus Command Timer timed outBus Command Timer abgelaufen check cyclic write of value "SET" or "SET_PRESET" or disable functionality by writing value "OFF"Regelmäßiges Schreiben von "SET" bzw. "SET_PRESET prüfen oder Funktion durch das Schreiben von "OFF" deaktivieren
Pump does not startPumpe startet nicht Ext. Off contact not closedExt. Off Kontakt nicht geschlossen Check the external controlExterne Steuerung überprüfen
Voltage at 0-10 V input not sufficientSpannung am 0-10 V Eingang zu gering
Pump stays at minimum speedPumpe läuft nur mit Minimal-Drehzahl Ext. Min contact closedExt. Min Kontakt geschlossen Check the external controlExterne Steuerung überprüfen
Voltage at 0-10 V input not sufficientSpannung am 0-10 V Eingang zu gering
Dual Pump function does not workDoppelpumpen-Funktion nicht gegeben Wiring damagedVerdrahtung beschädigt Check wiringVerdrahtung überprüfen
Incorrect menu settingFalsche Konfiguration Setup pumps according to operating manualDoppelpumpe wie im Handbuch beschrieben einrichten
bus address (⇅) is offered instead of 0-10 V setting in menuBus Adresse (⇅) anstelle von 0-10 V Eingang einstellbar Excess voltage has been attached between GND and Ext Off or ext minFremd-/Über-Spannung zwischen GND und Ext. Off bzw. Ext. min hat das CIF-Modul beschädigt Replace moduleModul ersetzen
Fig. 10.1: Errors / causes / remendiesAbb. 10.1: Fehler / Ursachen / Beseitigung

If the operating fault cannot be remedied, please consult a specialist technician or the nearest Wilo after-sales service point or representative.Lässt sich die Betriebsstörung nicht beheben, wenden Sie sich bitte an das Fachhandwerk oder an die nächstgelegene Wilo-Kundendienststelle oder Vertretung.

10.1 Status information vs Wilo E-codesStatus-Informationen und zugehörige Wilo E-Nummern

The following table shows the status information which is given corresponding to the Wilo E-codeDie folgende Tabelle zeigt die Abbildung von Wilo E-Nummern auf die zugehörigen Statussignale.

name error_code
Error Present 10,20,21,23,24,25,26,30,31,36,70,71,72,73,74,75,76,77,78,89,96,97,98,252
Service Required 10,12,16,21,23,24,25,26,27,34,36,37,38,40,41,42,50,52
Warning Present 3,4,5,6,7,11,32,33,35,42,50,51,52,53,54,251
Fig. 10.1.1: Status vs E codesAbb. 10.1.1: Status ↔ E-Kode

10.2 Relation between WILO Error Codes and error messages LON

10.2 Zusammenhang WILO-Fehlercodes und Fehlermeldungen LON

WILO LCD-Code WILO Bedeutung nvoPumpFault gesetzte Bits nvoPumpStatus gesetzte Bits nvoMaintenance gesetzte Bits nvoStatus Meldung
E04 Netz-Unterspannung pump_ctrl.sf_voltage_low pump_ctrl.supply_fault
pump_ctrl.device_fault
  electrical_fault
in_alarm
E05 Netz-Überspannung pump_ctrl.sf_voltage_high pump_ctrl.supply_fault
pump_ctrl.device_fault
  electrical_fault
in_alarm
E06 2-Phasenlauf pump_ctrl.sf_phase pump_ctrl.supply_fault
pump_ctrl.device_fault
  electrical_fault
in_alarm
E10 Blockierung pump_ctrl.df_pump_blocked pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E11 Leerlauf Motor pump_ctrl.sf_no_fluid pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E12 Laufr./Rotor schwergängig pump_ctrl.df_pump_blocked pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E16 Lagerverschleiß pump_ctrl.df_motor_failure pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E20 Übertemp. Wicklung pump_ctrl.df_motor_temp pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E21 Überlast Motor pump_ctrl.df_motor_failure pump_ctrl.device_fault pump_ctrl.service_required electrical_fault
in_alarm
E23 Kurz/Erdschluß pump_ctrl.df_motor_failure pump_ctrl.device_fault pump_ctrl.service_required electrical_fault
in_alarm
E24 Wicklungsschluß pump_ctrl.df_motor_failure pump_ctrl.device_fault pump_ctrl.service_required electrical_fault
in_alarm
E25 Kontaktfehler / Wicklung offen pump_ctrl.df_motor_failure pump_ctrl.device_fault pump_ctrl.service_required electrical_fault
in_alarm
E26 Temp.fühler Wicklung offen pump_ctrl.df_motor_failure pump_ctrl.device_fault pump_ctrl.service_required electrical_fault
in_alarm
E27 Drehzahlsensor defekt pump_ctrl.df_sensor_failure pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E30 Übertemperatur Modul pump_ctrl.df_elect_failure_nf pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E31 Übertemp. Leistungsteil pump_ctrl.df_elect_failure_nf pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E34 Zuordnung Modul/Pumpe pump_ctrl.df_elect_failure_nf pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E36 Laderelais/PFC defekt pump_ctrl.df_elect_failure pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E37 Zwischenkreiselko defekt pump_ctrl.df_elect_failure pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E38 Temp.sensor Medium pump_ctrl.df_sensor_failure pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E40 Ext. Drucksensor defekt pump_ctrl.df_sensor_failure pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E41 Ext. Schwingungs-sensor defekt pump_ctrl.df_sensor_failure pump_ctrl.device_fault pump_ctrl.service_required in_alarm
E50 GLT-Timeout pump_ctrl.df_elect_failure pump_ctrl.device_fault pump_ctrl.service_required unable_to_measure
in_alarm
E52 DP-Timeout pump_ctrl.df_elect_failure_nf pump_ctrl.device_fault   in_alarm

11 Spare PartsErsatzteile

Spare parts may be ordered via a local specialist retailer and/or Wilo customer service.Die Ersatzteilbestellung erfolgt über örtliche Fachhandwerker und/oder den Wilo-Kundendienst.

To avoid queries and incorrect orders, all data on the type plate of the CIF-Module and the device where it is mounted should be submitted with each order.Um Rückfragen und Fehlbestellungen zu vermeiden, sind bei jeder Bestellung sämtliche Daten des Typenschildes CIF-Modules und des Geräts anzugeben, in welches das Modul eingebaut ist.

12 DisposalEntsorgung

Information about collection of used electric and electronic productsInformation zur Sammlung von gebrauchten Elektro- und Elektronikprodukten

Proper disposal and recycling of this product prevents damage to the environment and risks to personal health.Die ordnungsgemäße Entsorgung und das sachgerechte Recycling dieses Produkts vermeiden Umweltschäden und Gefahren für die persönliche Gesundheit.

NOTE: Prohibition of disposal with domestic garbage!HINWEIS: Verbot der Entsorgung über den Hausmüll!

Within the European Union, this symbol may appear on the product, the package or on related documents. It means that the affected electric and electronic products shall not be disposed with the household garbage. For a proper treatment, recycling and disposal respect the following topics:In der Europäischen Union kann dieses Symbol auf dem Produkt, der Verpackung oder auf den Begleitpapieren erscheinen. Es bedeutet, dass die betroffenen Elektro- und Elektronikprodukte nicht mit dem Hausmüll entsorgt werden dürfen. Für eine ordnungsgemäße Behandlung, Recycling und Entsorgung der betroffenen Altprodukte, folgende Punkte beachten:

Request for information about proper disposal at local authorities, local waste collection points or at your dealer. Further information atInformationen zur ordnungsgemäßen Entsorgung bei der örtlichen Gemeinde, der nächsten Abfallentsorgungsstelle oder bei dem Händler erfragen, bei dem das Produkt gekauft wurde. Weitere Informationen zum Recycling unter

WILO Recycling

Product specifications are subject to change without prior notice!Technische Änderungen vorbehalten!

WILO SE

Wilopark 1

D-44263 Dortmund

GermanyDeutschland

T +49 231 4102-0

F +49 231 4102-7363

WILO AutomationWILO Automation